138WE/L-17/2020-21

Amount

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floor and pavings n.exc 15cm thick below or above ground level complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar, bedding (But not backing ) and rubbish of premises complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed.

Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed .

Dismantling roof tiles or roof treatment of any description including cement mortar, bedding (But not backing ) and rubbish of premises complete all as specified and as directed.

Cutting out cracks to V-Section in existing roofs or terracing ,cleaning out ,wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

Roughenng surface of old concrete floor by piking ,sweepng clean and washing down with water to remove dust etc complete all as specified and as directed.

Material and Labour for brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and as directed.

Material and Labour for 20 mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed.

Material and Labour for priming surfaces and applying heavy treatment (for severe conditions), using glass fibre base bitumen felt, grade 2 complete all as specified and as directed.

Material and Labour for 75mm PCC,1:3:6 type C-2 using 20mm graded curshed stone aggregate as in sub base of floor complete all as specified and as directed.

Material and Labour for PCC 1:2:4, 25 mm thick type B-0 using 12.5mm graded crushed stone aggregates as in floor finished even and fair with out using extra cement complete all as specified and as directed.

Material and Labour for APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surfaced application including removing old damaged existing roof treatment complete alll as specified and as directed.

Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick over 20mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete complete alll as specified and as directed.

Material and Labour for 20 mm thick Granite of any type over 20mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

Material and Labour for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11Sqm and nexc .18 Sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the shade of tile over the screed bed with CM (1:6), 15mm thick laying floor tiles complete all as specified and as directed.

Material and Labour for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 and nexc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the shade of tile over 15mm thick screed bed with CM (1:6) complete all as specified and as directed.

Material and Labour for Glazed ceramic coloured tiles in vertical surfaces 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the shade of tile over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and as directed.

Material and Labour for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments layed over 20mm thick cement screed base (1:6) complete all as specified and as directed.

Material and Labour for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed.

Material and Labour for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed.

Material and Labour for 5mm thick rendering on fair faces of concrete surfaces finished even and smooth without using extra cement in cement mortar 1:3 complete all as specified and as directed.

Supply and Fixing in repairs bib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe 15mm dia tap complete all as specified and as directed.

Supply and Fixing in repairs Stop Valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15mm bore dia of pipe complete all as specified and as directed.

Taking down steel tubing 20mm bore of pipe and connections in any position including cleaning for refixing or removal to store complete all as specified and as directed.

3 layer PP-R Polypropylene random copolymer pipes 20mm dia SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc complete all as specified and as directed.

Supply and Fixing in repairs PP-R Gate Valves 20 mm dia (brass insert) as per requirement of the site complete all as specified and as directed.

Supply and Fixing in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical, with closed top), hoisted and fixed in position complete all as specified in SSR Part I and as directed.

Supply and Fixing in repairs Waste cupling for bore dia discharge pipe of PTMT (half or full threaded) minimum weight 32 -45 gms/40mm -60gms) complete all as specified and as directed.

Supply and Fixing in repair 15 mm bore Pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

Material and Labour for sheet glass 4mm thick ordinalry quality and glazing with aluminium beeds in square not exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and Fixing 2nd Class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply and Fixing 35mm thick (Factory made) 2nd class soft wood plain framed panelled shutters (any number of panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veeneers and fixed to chowkats complete all as specified and as directed.

Supply and Fixing 35mm hard wood Glazed and skelton shutter, open and prapared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

Supply and Fixing mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete all as specified and as directed.

Material & Labour for PCC, (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed.

Supply and Fixing Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars,dovetailed or welded complete (glass measured separetally) all as specified and as directed.

Material and Labour for sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and Fixing mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

Supply and Fixing 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

Supply and Fixing150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

Supply and Fixing 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and Fixing 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed

Material and Labour for preperation of old plastered surfaces of wall any description and applying one coat of white wash complete all as specified and as directed.

Material and Labour for two coats cement base paint over newly plastered surfaces including preparation of surfaces complete all as specified and as directed.

Material and Labour for one coat of cement base paint on old decorated surfaces of walls including preperation of surfaces complete all as specified and as directed.

Material and Labour for three coats of white wash on newly plastered surfaces of walls including preperation of surfaces complete all as specified and as directed.

Material and Labour for Preparing newly plastered surfaces of wall and applying two coats of distemper oil emulsion including priming plastered and other surfaces complete all as specified and as directed.

Material and Labour complete removal of existing treatment of wall and applying two coats of distemper oil imulsion with complete removal of existing treatment complete all as specified and as directed.

Material and Labour for one coat of white wash on old decorated surfaces of walls including preperation of surfaces complete all as specified and as directed.

Material and Labour for three coats of white wash on newly plastered surfaces of ceiling including preperation of surfaces complete all as specified and as directed.

Material and Labour for one coat of white wash on old decorated surfaces of ceiling including preperation of surfaces complete all as specified and as directed.

Material and Labour for two coats of synthetic enamelled paint on new wooden surfaces including preperation over a coat of pink primmer complete all as specified and as directed.

Material and Labour for one coat of synthetic enamelled paint on old decorated wooden surfaces including preperation complete all as specified and as directed.

Material and Labour for preparation new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and Labour for preparation of old painted steel surface and applying one coat of synthitic enamel paint.

Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed

Dismantlng fillets,rails,posts,rafters,purlins ,grids for ceiling & wall panelling etc under 40 Sq.cm in secton.complete all as specified and as directed.

Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

Taking down shutters of any description area not exceeding 1 Sqm each complete all as specified and as directed.

Material and Labour for Cement Concrete type B-2,1:4:8 ( using 40mm graded crushed stone aggreates) 100 mm thick as in sub-floors, sub- bases,floors and pavings etc complete all as specified and as directed.

Material and Labour for 2nd class Hard wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section complete all as specified and as directed.

Material and Labour for 2nd class Hard wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section complete all as specified and as directed.

Material and Labour for 9mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

Material and Labour for 9mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work as in ceiling complete all as specified and as directed.

Material and Labour for pre cast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregates complete all as specified and as directed.

Material and Labour for preparation of new concrete /plastered surface of any description and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed.

Material and Labour for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Supply and Fixing in repairs PVC connection pipe suitable for connecting flushing cistern and WHB etc 450mm long complete all as specified and as directed.

Supply and Fixing in repairs 500 litres capacity rotational moulded polyethylene water storage tanks with cover (Cylinderical vertical, with closed top), hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Supply and Fixing in repairs wash basin, vitreous china ,white , flat back, size 630X450 mm including brackets & including cutting for and pinning in ends of brackets or errecting stand but excusive of fixing of supply and waste pipe complete all as specified and as directed.

Supply and Fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Supply and Fixing in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Material and Labour for complete removal of existing treatment on concrete /plastered /stone wall surface of any description and applaying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed.

Taking down carefully aluminium / copper point wiring light/fan/socket or power complete including unscrewing from board fitting and fixture such as switches, sockets, ceiling roses, lamp holders, brackets, pendent holder , light fittings , regulators, distribution/ Meter boards, MCBs etc and making good the distturbed surface matching with existing specifications complete all as specified and directed.

Point wiring for one light point or fan point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts fire resistance ISI, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board for mounting fitting/ switches/ sockets and 1.50 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.Make : Havells/ Polycab/Finolex

Description all as per serial item No- 81.00 here-in-before but for 5 Amps 3 Pin Socket outlet on same board, complete all as specified and as directed.

Description all as per serial item No- 81.00 here-in-before but for 5 Amps 3 Pin socket outlet on independent board, complete all as specified and as directed.

Point wiring for 3-pin, 15 Amps, socket outlet on independent board with 2.5 Sqmm, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board for mounting fitting/ switches/ sockets and 1.5 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.

Switch piano, flush type, single pole, one way, 5 Amps 240 Volts, complete all as specified and as directed .Make: Anchor/ Plaza/ Havells.

Switch socket outlet 2 in 1, 3 pin, 5 Amps, 240 Volts flush type complete all as specified and as directed.

Switch socket combination piano, flush button single pole one way, 5 in 1, 5/6 Amp, 240 Volts complete all as specified and as directed.Make Anchor/ Plaza.

Supply and Fixing in repairs Ceiling rose, surface bakelite 65 x 50 mm two or three terminals complete all as specified and directed.

Sypply and Fixing Recess mounting LED light fitting 34 watt including separate electronic driver and high brightness SMD LEDs ultra mordern suitable for armstrong /grid/ POP ceiling in MS housing with high brightness 4000K LEDs suitable for 230 Volts 50 Hz diffused type optics 2'x2' in size complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper concuctor cable of suitable size complete all as specified and as directed. Make Havells Cat Part No. LHEEBP7CULIW034 or Equivalent model of Make: Crompton/ Phillips/ Bajaj.

Supply and Fixing LED bulk head light fitting 1x10 Watt 230 volt attractive wall / Ceiling mounted any type with white reflector complete with all accessories prewired and including connecting up with twin core twisted flexible copper concuctor cable of suitable size complete all as specified and as directed. Make Havells Cat Part No. RUGBYNEONFT10WLED860SSYMTOPC or Equivalent model of Make: Phillips/ Bajaj/CG.

Supply and Fixing LED Light fitting including LED tube light 1x20 watt, 230 Volts, 50 Hz decorative ultraslim LED lighting fixture with extruded polycarbonate, environment friendly energy efficient with intergrated driver including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed . Make : Havells, Cat Part No LHEXACP7IN1W020.

Supply and Fixing in repairs Lamp Holder PVC/ Ploycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. Make Havells/ Kinjal/ Anchor.

Taking down existing unserviceable /Old / DBs from any height and and any make complete all as specified and as directed

Supply and Fixing factory made epoxy powder coated Distribution Board double door TP & N 4 ways (TPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with suitable for one MCB TPN , 415 vOLTS 63/40 Amp, 10 KA as incomer and 12 SP MCBs /3 TPN MCBs outgoing complete all as specified and conforming to IS 8623 and as directed.

Supply and Fixing Sheet metal enclousers (MCB Distribution Board) when MCBs to be used single pole neutral 12 ways 240 Volt with 200 Amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good to the disturbed surface and colour matching complete all as specified and as directed.Make Havells / Legrand/ Hager.

Supply and Fixing in repairs Isolator TPN 63 Amp 415 Volts, connecting with copper lugs complete all as specified and as directed.Make: Legrand/ L&T / Seimens.

Supply and Fixing in repairs Distribution Board (SPN) MCB 16-40 Amps, 240 Volts, 50 Hz AC made from moulded self existing thermostat plastic and suitable 'C' curve 10 KA breaking capacity and terminal box suitable for 4 to 10 Sqmm cable complete conforming to IS 8828 of 1996 and all as specified and as directed.

Supply and Fixing in reapirs Distribution Board (SP) MCB 6/10/16/20/25/32 Amps, 240 Volts, 50 Hz AC made from moulded self existing thermostat plastic and suitable 'C' curve 10 KA breaking capacity and terminal box suitable for 1.5 to 6 Sqmm cable complete conforming to IS 8828 of 1996 and all as specified and as directed.

Supply and Fixing LED light energy saving and environment friendly long life verstile pressure die cast aluminium, IP 66 street light of 48 watt 5700K 240 Volts single phase LED light suitable for 50mm dia pipe for fixing on wall including connection with suitable size 3 core PVC cable complete all as specified and as as directed.Make Havells Cat Part No.ENDURAPEARLNEOSL48WLED757SASYTOPC or equivalent of Make:Bajaj/ Philips/ C&G.

Material and Labour for Rewinding of burnt windings of Exhaust fans of size 400-450mm size including dismantling from location and removing the burnt out winding, cleaning the starter and CTC solution to remove the burnt slots. Rewinding the same with new super enamelled coper wire same gauge and size / number of turns, varnishing the winding complete all as specified and as directed. Note:- (Spare parts replaced will be measured and paid seperately)

Supply Only following spares / Items of Exhaust fan of various types:-

Flexible twin twisted copper wire 2 core of size 23/0.0076mm up to 1.6 m length.

Ball Bearing Suitable for Exhaust Fan 400mm -450mm sweep any make.

Gun Metal Bushings suitable for Exhaust fan 400mm to 450mm sweep any make.

Material and Labour for painting of Exhaust fan up to 450mm sweep complete with synthetic enamel paint of white colour or any approved colour after cleaning the surfaces and marking the serial Nos and formation Name complete all as specified and as directed.

Material and Labour for replacement of louvers made out of metal sheets suitable for up to 450 mm sweep exhaust fans complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with galvanized iron wire 4.0mm dia as earth lead means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15 mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1(using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed. Note: The cost of excavation and earth work, PCC pit and pit covers, funnel and watering pipe, wire mesh, charcoal dust and common salt, 15mm dia, medium grade, GI pipe as protection to earth lead and earth lead as 4.0mm dia GI wire (main earthing lead from earth electrode to test point length not less than 7.5mtrs) shall be deemed included in the unit rate for earthing.

Sub main wiring for circuit/ submain wiring alongwith earth wire with two run of 6.0 Sqmm of PVC insulated copper conductor, single core cable, multi stranded, FRLS, ISI marked, 1100 Volts grade and one run of 4.0 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including PVC casing and capping, ISI marked, fixed on surfaces of walls/ ceilings, including making good to disturbed surface matching to existing descriptions/ specifications, complete all as specified and directed.Make: Havells/ Plaza/ Finolex.

Supply and Fixing heavy duty five star rated Exhaust fan AC single phase 230 Volts of size 300 mm sweep with louvers and shutters and connecting up including provision of cable from ceiling rose to connector of fan controlled by one way switch complete all as specified and as directed.

Supply and Fixing Sheet metal enclousers (MCB Distribution Board) when MCBs to be used single pole neutral 8 ways 240 Volt with 200 Amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good to disturbed surfaces and colour matching complete all as specified and as directed..

Supply and Fixing on existing distribution Board TPN MCB 40/63 Amps, 415 Volts, 50 Hz AC made from moulded self extinguishing thermostat plastic and suitable 'C' curve 10 KA breaking capacity and terminal box suitable for 16 to 35 Sqmm cable complete conforming to IS 8828 of 1996 and all as specified and as directed.

Sheet metal enclousers with socket plug top and MCB single pole with a two pin and earth plug and socket complete with one MCB of rating 32 Amps C series Complete all as specified and as directed.Make Havells/ Legrand/ C&S/Indoasian.

Excavation in trenches, not exceeding 1.50 m wide and n. exc 1.50 m in depth and getting out in Soft/ loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25Cm, complete all as specified and directed.

Removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed.

Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and directed. Note: Punned thickness shall be measured.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type-I, flat, size 250mmx150mmx40mm, complete all as specified and directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with multi-standard aluminium conductor, 1100 volts grade, cross sectional area 25 Sqmm 4.0 core, laid in trenches or passing through pipes, including making necessary connections at both ends, complete all as specified and directed.

Supply, Installation, Testing and Commissioning in repairs of 5 star rated storage type water heater (Gyser) of storage capacity 100 Ltr verticle / Horizontal type suitable for operation on 230 V, 50 Hz 1 Ph AC supply with automatic cut out complete all as specified and as directed.Cat Pat No. MONZA(HAVELLS)/ BAJAJ MAJESTY 25 L CHM or equivalent make and model of VENUS/V-GUARD.

Mehar Enterprises

ASHOK KUMAR SHARMA

SHARMA AND SONS CONSTRUCTION CO

M/S SHAMSHER ALI SUFI

M/S Praveen Kumar and Sons

VIJAY ENTERPRISES

Rampal Singh Contractor