SPECIAL REPAIR TO BLDG NO P-336 (OTM BUILDING) OF 694 COY ASC (TK TPTR) TYPE A AT JALIPA MIL STN UNDER GE (A) BARMER

Amount

Demolition of brick/stone walling built in cement mortar including all quoins, arches, pillars etc., including removing rubbish to out side MD land complete all as specified and as directed.

Precast cement concrete solid block masonry of 1:3:6 type C-1 by using 20mm graded crushed stone aggregate exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and as directed.

M&L squared rubble jodhpur type brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed .

Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including removing rubbish to out side MD land complete all as specified and as directed.

M&L PCC 1:4:8 type D2 by using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed.

Non skid ceramic tiles, coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Glazed coloured ceramic tiles of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc including removing rubbish to out side MD land complete all as specified and as directed.

Rendering internally 10 mm thick in cement mortar1:6 on block / concrete surfaces finished even and smooth with out using extra cement complete all as specified and as directed.

Rendering externally 15 mm thick in cement mortar1:4 mixing with water proofing compound ( WPC) as per manufacturer instructions on block / concrete surfaces finished fair and even with out using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid separately as supply only.

M&L for plastering 5 mm thick in CM 1:3 on stone/ concrete surfaces of ceiling , finished even and smooth without using extra cement complete all as specified and as directed. .

M&L for preparation of newly plastered wall surfaces and applying Two coats of weather proof exterior emulsion Paint (Apex) [100% Acrylic] over a coat of alkali resistant Primer coat complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over one coat of primer on walls including and over two coat of birla wall care putty complete all as specified and as directed.

Preparation of new plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered wall surfaces and applying two coats of oil bound distemper over one coat of birla wall care putty on walls complete all as specified and as directed.

Comoplete removal of existing treatment of wall surfaces and applying Two coats of weather proof exterior emulsion Paint (Apex) [100% Acrylic] incld & over a coat of alkali resistant Primer complete all as specified and as directed.

Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.

S&F in repair fancy type, chromium plated, bib tap, long body cast copper alloy with spindle,half turn with screwed down, screwed for 15 mm bore iron pipe complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and as directed.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and as directed.

S&F GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and as directed.

S&F 1000 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including ball valves for 25mm bore pipe, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (minimum weight 210 gms) and taking down old tank complete all as specified and as directed.

M&L Rolled mild steel sections like angle, channel, flat, square etc as in cooler stand including cutting / welding etc., and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

Cutting holes in stone / brick / PCC walls in cement mortar for inserting holdfasts of cooler stand and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, Depth of embedded portion of angle or lugs measured from the face of the wall into exc half brick to full brick of wall complete all as specified and as directed.

Preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and as directed.

S& F in repairs stainless steel curtain rods of 1 mm thick and 25mm dia, including 8 nos PVC rings per running meter of curtain rod complete all as specified and directed.

M&L keyed pointing in cement mortar (1:4) to random rubble masonry , un coursed complete all as specified and directed .

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc . removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and as directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and as directed.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including in PVC casing & caping with all fittings and accessories , complete fixed on wall/roof/floor etc, with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/fan/ bell point controlled by one, one way switch complete all as specified and directed .

All as per serial item No 36.00 above but for 5 Amps socket on same board with other switches.

All as per serial item No 36.00 above but for 5 Amps socket point on independent board.

All as per serial Item No. 36.00 above but for 15 Amps socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and as directed.

S&F switch piano 5 Amp flush type single pole one way with ISI marked,complete all as specified and as directed.

S&F socket outlet, multipurpose, 3 in 1, 5 and 15 Amps, flush type, universal ,230 Volts controlled by one switch complete all as specified and as directed.

S&F socket outlet 5 Amps 2-in-1, 3/5 pin 230 V AC flush type, complete all as specified and as directed.

S&F ceiling rose, 50 mm dia, 3 phase / PVC / Polycarbonate, isolated body two to three terminals complete all as specified and as directed.

S&F switch socket outlet, multipurpose, 3 in 1, 5 and 15 Amps, flush type, universal ,230 Volts controlled by one switch complete all as specified and as directed.

S&F in replacement of LED tube light fitting 20W 4 feet PVC extruded with batten ( integrated driver), 6500K colour temp, decorative type with all accessories internally pre wired including retrofit T5 polycarbonate tube with connector block and connectiong up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Havells / Bajaj /Philips / CG

Fixing only LED tube light fitting retrived from old existing location, in serviceable condition and connectiong up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed

S&F in replacement of Electronic fan regulator, stepped type, 100 W, AC, 230 Volts, fixed on existing laminated sheet complete all as specified and as directed.

Fixing only ceiling fan regulator retrived from old existing location in serviceable condition and connectiong up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed

S&F in replacment 1400mm sweep ceiling fan minimum three star rating complete all as specified and as directed.

Taking down ceiling fan in serviceable condition and refixing the same location after painting, oiling/greasing and minor repairs as required complete all as specified and as directed

S&F in replacement of LED streetlight 30W made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP65 protection. including bracket as required length with clamp nut, bolts washers etc & connecting, testing and taking down unserviceable light fitting complete all as specified and as directed. Make : Bajaj Cat Part No.BCLST 30W or techno commercially equivalent model of make Philips / CG / Havells

Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing & caping/including cutting chases for cinduits and making good disturbed surfaces complete all as specified and as directed.

M&L for submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC casing & caping fixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 4 way, 240V for fixing MCB's complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,TPN 4 way, 415V for fixing MCB's complete all as specified and as directed.

S&F in replacement of MCB TPN ‘C’ Curve 10KA, 63 amps, 415V complete all as specified and directed . Make : Legrand cat part No. 603308 or techno commercially equivalent model of make Siemens/ Havells

S&F in replacement of MCB SP ‘C’ Curve 10KA, 6 to 32 amps 240 volt complete all as specified and directed .

S&F in replacement of MCB SPN ‘C’ Curve 10KA, 6 to 32 amps 240 volt complete all as specified and directed .

S&F in replacement of On load change over switch I-O-II 200 Amps 4 pole Phase barriers and handle with door interlocking kit 415 Volts with sheet metal encloser complete all as specified and as directed . Make : Havells Cat Part No.IHCNFE0200 or Techno commercially equivalent model of make Legrand / L&T / Indoasian

M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991)incl dismanteling of existing unserviceable earth pit all as specified and directed by Engr-in-Charge.

M.D. CONSTRUCTION CO.

Kusum Traders

M/s godara infratech and power industries