GE(S) BTD TOKEN NO 44 OF 2021-22 SPECIAL REPAIR TO CERTAIN BUILDING OF SWC CBRN TRG SCHOOL UNDER GE(S) BATHINDA AT BATHINDA MIL STN

Amount

S & F in repair vitreous china urinal, half stall type white excluding flushing cistern, flush and waste pipe including providing and titing plugs, bedding urinal against wall in CM 1:2 , securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap including water closet seat cover of plastic,jet etc. complete all as specified and directed.

S & F in repair PVC low level flushing cistern of 10 litres capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and directed.

S&F in repair of 15mm bore pillar taps cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed.

S & F in repair 15 mm bore brass stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair brass chromium plated shower rose 100 mm of size with arms and with or without swivel joints to steel pipe or union complete all as specified and directed.

S & F in repairs 15 mm dia chromium plated brass stop valves cast copper alloy (concealed type) complete all as specified and directed.

S&F in repair 15 mm dia bore chromium plated bib tap fancy type.,cast copper aloy with crutch or butterfly handle screwed down, srewed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair CP grating of best quality of size 100/150mm complete all as specified and directed.

S&F in repair Towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and directed.

S&F in repair chromium plated soap tray of size 160mm x 160mm x 1mm thick and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.

M&L in repair for 22-25mm dia fancy type PVC coated on MS Pipe coloured curtainrod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F in repair Acrylic sheet corner shelf 200 mm size fixed in position with stainless steel screws & PVC rawl plugs complete all as specified and directed.

Dismantling Wall lining& Ceiling boards any thickness,any material including cover fillets etc complete all as specified and directed.

S & F 595x595mmx6mm thick Gypsum board laminated with PVC Sheet as in false ceiling including supply and fixing 'Tee" grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flag fixed to RCC ceiling with dash fastener or wraping the suspending wire around the existing wooden/steel purlin/rafter for suslpending grid frame work of size 600mmx600mm suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-grid as per manufacturer direction. The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mmx24mmx0.60mm and. Perimeter angle 24mmx24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall including or wall including all as per manufacturer's instruction complete all as specified and directed .

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L 15 mm thick cement plastering in patches in CM 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed..

M & L 15 mm thick cement rendering in patches in CM 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed..

M & L two coats of oil bound distemper on new surfaces of walls including preparation of surface to match with existing work complete all as specified and directed.

M & L two coat of snowcem ( cement based paint) on new surfaces of walls, including preparation of surfaces to match with existing work complete all as specified and directed..

M&L applying two coat of oil bound distemper including preparation of old distempered surfaces of walls by brooming down or steel wire brushing and complete all as specified and directed.

M&L applying two coat of snowcem ( cement based paint) over preparation of old surfaces of walls by brooming down or steel wire brushing complete all as specified and directed..

M&L applying one coats of synthetic enamel paint including preparation of old wood or wooden based surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

M&L applying one coat of synthetic enamel paint including preparation of old painted surfaces of walls, pillars complete all as specified and directed

M&L one coat of synthetic enamel paint on old surfaces of steel including prepration of surfaces complete all as specified and directed.

Taking down chowkats or frame with shutter of any description (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed.

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed.

S & F for 30 mm thick factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame, complete all as specified as directed by Engineer-in Charge.

S&F 100 mm long extruded aluminium alloy butt hinges fixed to PVC door with screwscomplete all as specified and directed .

S&F aluminium anodiesed barrel tower bolt of extruded section size 150 mm complete all as specified and directed..

S&F aluminium handles cast type anodized size 125 mm long complete all as specified and directed.

Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and Refixing of shutters in same opening after resecuring or easing & adjusting, complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters of any description (W/out taking off shutters from the frames) and removal from site complete all as specified and directed.

S& F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

Supply and fixing 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), using 2nd class hard wood (Bonsum / Hollock), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. Note - Wire gauze / glass to be measured and paid separately

&F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick veneered particle board with commercial veneering on both faces conforming to IS-3097 exterior grade kiln seasoned and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003(Part I) complete all as specified and as directed.

S & F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed.

S & F 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed.

S&F mild steel 200mm long barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed complete all as specified and directed.

S&F mild steel 150mm pressed handles, oval type ISI marked stove enamelled black complete all as complete all as specified and directed.

M & L applying two coats of sythetic enamel paint including preparation of new wood surfaces complete all as specified and directed.

S & F Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat painting complete all as specified and directed.

S & F Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat painting complete all as specified and directed.

S & F window guard bars and similar works with ends of bars welded or riveted confirming to Fe.290. Gde-E-165 complete all as specified and directed.

M&L for applying two coasts of synthetic enamel paint (for steel surfaces) including preparation of new steel surfaces of any description over 10cm width or girth complete all as specified and directed.

M & L sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and directed.

M & L figured glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and directed.

S&F anodized aluminium frame for door,window and ventilators with one or more rebate inc joining cleat for fixing in repair complete all as specified and directed.

S&F anodized aluminium window/ventilators shutters/Partition fixed type w/o sash bar, al. section wt 0.55kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws etc in repair complete all as specified.directed.

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips complete all as specified and directed .

Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complete all as specified and directed .

S&F framed brackets of angles cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary, each backets confirming to Fe - 290, Gde - E - 165 as door frame, steel gate,sink, hand wash basin and cooler stand etc complete all as specified and directed .

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and directed .

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring laid in floor as directed 6 Kg/Sq cm.complete all as specified and directed.

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes in reopair complete all as specified and directed.

M&L for 100mm dia of PVC (SWR) floor trap plain with grating incluing jointing with solvent cement in repair complete all as specified and directed.

M&L for 15 mm thick Screed bed or bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in floors (in patches) including dismantling existing floor tiling and cement mortar bedding (but not backing) and removing rubbish from the site etc complete all as specified and directed Note:- Screed bed shall be measured and paid under item no. 61 here-in-above.

Material and labour for machine cut (550x550mm) kota stone slab flooring (in patches) 18-22mm Thick over screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling existing flooring and cement mortar bedding (but not backing) and removing rubbish from the site complete all as specified and directed . Note:- Screed bed shall be measured and paid under item no. 61 here-in-above.

M&L Machine cut kota stone (in patches)18-22mm Thick in riser of steps skirting dado, pillar etc over cement plaster laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling existing skirting and cement mortar bedding (but not backing) and removing rubbish from the site complete all as specified and directed. Note:- Screed bed shall be measured and paid under item no. 61 here-in-above.

M&L for grinding and polishing of old existing treated terrazo topping/marble/kota stone etc flooring including treating the surface with wax polishing and cleaning of splashes and making good to match the existing surface etc complete all as specified and directed.

Taking up or down GI tubing 15 mm bore pipe complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors complete all as specified and directed.

Taking up or down GI tubing 20 mm bore pipe complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors complete all as specified and directed.

M & L in repair PCC 1:2:4 for PCC type B-1 using 20 mm graded stone aggregate as in coping steps bed blocks etc complete all as specified and directed.

Demolition of brick work of any type built in cement mortor etc complete all as specified and directed.

M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, in half brick thick built in cement mortar 1:4, complete all as specified and directed.

Dismantling water tanks of capacity 500 Ltr complete all as specified and directed.

S&F 500 ltrs capacity three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed .

S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdesity plastec ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm gun metal gate valves with iron wheel head complete all as specified and directed.

S&F in repair 20mm gun metal gate valves with iron wheel head complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.

M & L 50mm thick PCC (1:3:6) type C2 as in plinth protection and path in repair complete all as specified and directed.

M&L for hard core of broken bricks gauge n.exc 63 mm, deposited, spread and levelled in layers in exc 15 cm thick. Watered and rammed to true surface complete all as specified and directed.

S&F in repair 60 mm thickness, M-35 Grade Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of with grey cement & pigment including 25mm thick sand cushioning complete all as specified and diretced.

M&L in repair cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as roof kerbs or mud stops, rounded or chamfered on edges.complete all as specified and directed.

S & F in repair floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.

M&L welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directed .

S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed.

S&F in repair Mild steel, 300 mm, ordinary rat tail rod pattern spring including roller and roller plate,,complete all as specified and directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed. Note:- opening of existing wind tie where required for taking down of AC sheet is included) complete all as specified and directed .

S&F Pre pantined galvalume aluminum zinc coating GI based corrugated steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as spd complete all as specified and directed .

S&F Pre pantined galvalume aluminum zinc coating GI based plain steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed .

Dismantling timber scanting 40 Sqcm and over in section in any position framed work complete all as specified and directed.

Dismantling framed steel trusses work in any position n exc 10m span complete all as specified and directed.

S & F Mild steel rolled section as in vertical posts, trusses, rafter, purlins etc including distance pieces, cleats etc confirming to Fe-290 ( Gde E-165) complete all as specified and directed .

S&F in repair Plates (Plain or chequered) channels,squarecut or notched (ordinary and counter sunk) forming holes, w/o any attachment conforming to FE-410-W( Gde-E-250 )quality -A complete all as specified and directed .

S&F in repair for joist,channel, angles or tees with web and flanges cut to shape drilled and counter sunk for screw, including bending and welding angles as necessary, gusset plates, riveting etc. n.exc 10 kg each brackets conforming to FE-290 Gde-E-165 ) complete all as specified and directed.

Taking down carefully existing copper point wiring (light/fan/sockets) complete with all accessories such as switches sockets ceiling rose, wall bracket etc and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface etc complete all as specified and directed.

M & L for point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia heavy duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed .(Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of Sch 'A' ).

All as per item No 97.00 but for socket 5 Pin, 5 Amp 230 Volt on same board.

All as per item No 97.00 but for one socket point outlet 3 Pin, 5 Amp 230 Volt on independent board.

All as per srl item No. 97.00 (here-in-before) but for 3 pin 15 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 1.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed.

S& F switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed.

S&F one switch & one socket outlet 5 Pin 5 Amp 230 volts AC including decorative frame cover etc complete all as specified. Note:- Switch and socket shall be of same make.

S&F one switch and one socket outlet multipurpose 3 Pin 5 Amp and 6 Pin 15 Amp 230 volts AC including decorative frame cover etc complete all as specified. Note:- Switch and socket shall be of same make.

S&F Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed .

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting SPN DB, 8 way, 230 Volt, with 100 Amp rated bus bar with blanking plates suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting TPN 4 way, 415 Volt, with 200 Amp rated bus bar with blanking plates suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

S&F TPN MCB 63 Amp MCB repturing capacity 10 KA etc complete all as specified and directed.

S&F MCB DP 20 to 40 Amp MCB repturing capacity 10 KA etc complete all as specified and directed.

S&F MCB 6 Amp to 32 Amp SP capacities 10KA rupturing capacaity complete all as specified and directed.

S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi strandard conductor FR-LSH cable of size 6 sqmm, 1100 votls grade drawing through and including concealed conduit 20 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 6 sqmm unsheathed multistranded FR-LSH copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed including taking down old unserviceable wiring. (Note:- Three lengths of 6 Sqmm cable will be measured as one length).

S&F wall / surface mounted extruded Aluminium/polycarbonate LED batten fixture T8(G13 holder) 1.2 m, including one LED retrofit tube 20(±10%) watt, 1.2 m T8 6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete complete including making connection complete all as specified and directed.

S&F plug and socket in sheet metal enclosures with two pin and earth plug and socket complete with and including MCB SP 20 Amps 240 volts heavy duty etc complete all as specified and as directed .

S&F mini mirror LED light indoor domestic mirror light luminarire 1X5 Watt including connections with with twin core wire of suitable size complete all as specified and as directed .

M&L for Earthing with galvanized steel earth plate electrode 600x600x6mm size burried directly in ground to depth not less than 2.25m below ground level with top edge of the plate not less than 1.5 mtr below normal ground level surrounded with char coal and common salt filling in alternative layers of 15cm thick and connected to GI earth wire 4mm dia by means of nuts/bolts and washers etc made out of galvanized iron including 15mm dia GI pipe light grade for protection of earth wire from earth to distribution board 20mm dia GI pipe medium grade connected to funnel heavy wire mesh for watering purpose including necessary excavation and earth work PCC (1:2:4) type B1 for contrite pit 10mm thick PCC CI frame cover all as specified and shown in electric plate Nos 3/ SSR Pt-I and testing on completion including old replacement of old testing

Note:- Net contract sum shall be calculated after deduction of Sch of credit of Rs. 101485.00

M/s R.K. CONSTRUCTIONS

Aman Enterprises

RAMA AUTOS

M/s Verma Construction Company

SHARDA ENTERPRIES