CWE/GGN/FT-31/2025-26 CONSTRUCTION OF SITE OFFICE AT HQ CWE (AF) GURGAON UNDER GE (AF) FARIDABAD

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation getting out soft loose soil complete all as specified and directed

Material & Labour for plain cement concrete (1:4:8), type D-2, (using 40mm graded stone aggregates) in foundations, filling, sub base, mass concrete etc complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm of soft loose soil.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material & Labour for PCC 1:3:6 type C2 using 40mm graded aggregate as in foundation, filling, sub base etc complete all as specified and as directed.

M & L for brick work with subclass “B” Old size bricks, straight or curved on plan,exceeding 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class old size 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed.

M&L Form work to sides & soffits of lintels over 1.5m clear span, floor or roof beams, cantilevers, etc for rough finished flat surfaces of concrete complete.

M&L for providing reinforced cement concrete Type B1 (1:2:4) using 20mm nominal size graded crushed stone aggregate as in beams, cantilevers, bressumers,lintels over 1.5m span etc.complete including necessary form work complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M & L for mild steel TMT bars 6 mm to 8 mm dia, in stirrups cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated etc.) sheets in roof coverings complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including frames and cover fillets complete all as specified and directed.

Dismantling wrought cast iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface 450x300 x 6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over & including 10 mm thick rendering as in backing wall plaster in cement mortar (1:4) complete all as specified & directed.

M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.11 Sqm but n.exc 18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed.

M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed.

M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 for vertical surfaces such as skirting etc complete all as specified & directed.

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra complete all as specified and directed.

M&L for Pressed steel frames (125 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

M&L for plain cement concrete (1:3:6), type C-1, (using 20mm graded crushed stone aggregates) as in bed block, blocks for holdfasts, filling in pressed steel door frames, benching slightly rounded or chamfered angles & throating etc including necessary use & waste of form work complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.

M&L for rendering 10 mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified & directed.

M&L for preparation of new plastered surfaces of wall and preparing surfaces as directed and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old painted or plastered surfaces of walls etc by washing, rubbing down and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and preparing surfaces as directed and applying two coats of distemper oil emulsion over a coat of primer complete all as specified & directed.

M&L for preparation of old plastered surfaces of walls,by washing,rubbing down and stopping of distempered and painted surfaces etc.and applying one coat of distemper oil emulsion complete all as specified & directed.

Supply & Fixing mild Steel work in hollow square/rectangular section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides and similar work fixed with angle cleats or other connecting plates Fe 410- W Gde 250 quality A complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws complete all as specified and as directed

Providing and fixing inter locking metal grid (snap grid for false ceiling) of Gl frame work for seamlessceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal langes of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 600 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 600 mm centre to centre. ® complete for all heights as per specifications and as directed

M&L for 4 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws complete all as specified and directed.

S&F 30 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & both face is covered with decorative face veneer with lipping / frame to match & fixed to chowkats complete all as specified & directed.

S&F 35 mm thick, hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete fixed to frames complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel & fixed complete all as specified & as directed.

S&F 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.

S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed.

S&F 300mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & as directed.

M&L for preparing new wood & wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S & F for powder coated aluminum anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F for powder coated aluminum anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). inges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction complete all as specified and directed.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane fixed with neoprane rubber gasket in alumimium frame work complete all as specified and directed.

M&L for preparation of new or previously steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 20mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed.

S&F 15mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed.

S&F fancy type15mm dia Bib taps cast copper alloy, long body, chromium plated screwed down to iron pipe or for brass ferrule & fixed complete all as specified & directed.

S&F fancy type15mm dia pillar taps, cast copper alloy swan neck type, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe & fixed complete all as specified & directed.

S& F brass chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union complete all as specified & directed.

S&F 15mm bore dia angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe and to flushing pipe antisyphonage pipe etc with plastic water closet seat, black closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed.

S&F vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding complete all as specified & directed.

S&F hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) with clamp complete all as specified and as directed.

S&F Wash basins white, vitreous China, flat back, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified & directed.

S&F PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of 1000 ltr capacity,(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I & as directed.

S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified & as directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed.

M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) fixed in repair complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia any radius complete all as specified and directed.

S&F PVC (SWR) bends 75mm dia any radius as all as specified and directed.

Taking Down carefully Copper/aluminium Point Wiring (light, fan,socket or Power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators sockets etc, removing materials to store for keeping in safe custody or for taking credit as per condititions seperately and making good disturbed surfaces of walls, floors etc.

M&L for point wiring complete with 1.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 volts grade FRLS grade cable confirming to IS-694 marked drawn through and including rigid non metallic PVC heavy duty, IS marked, concealed conduit (min 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.12.5 of SSR Part I ) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, juction boxes etc fixed concealed in wall/ceiling or surface conduit on ceiling with provision of 2 mm thick pressed steel terminal boxes covered with 3 mm thick plastic laminated white /coloured top cover for mounting switch,socket,fan regulator,industrial socket and all lamp fittings etc including 1.5 sq mm PVC insulated but unsheathed copper conductor FRLS grade cable,1100 volt grade IS-694 marked as earth contuinity wire for one light/Fan point controlled by one,one way switch complete all as specified and directed.

Complete all as Item No. 68.00 mentioned here-in- before but for 5 Amp socket on the same board with other switches with 1.5 sq mm PVC insulated copper conductor, FRLS grade for continuous earthing complete.

Complete all as Item No. 68.00 mentioned here-in- before but one three pin 5 Amps socket out let on independant board with FRLS grade 1.5 sq mm PVC insulated copper conductor for continuous earthing complete.

Complete all as Item No. 68.00 mentioned here-in- before but 15 Amps 3 pin socket outlet on independent board with FRLS grade, 2.5 sq mm, PVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single core for continuous earthing complete.

Taking down carefully aluminum/copper two core sub main wiring of sizes 6 Sqmm /4 Sqmm cable any type and removing old material from site and making good disurbed surface all as specified

M&L for two run of single core, PVC insulated, FRLS grade cable with copper conductor, multi stranded, 6 Sqmm in and incl duly drawn through and including concealed PVC conduit suitable size (not less than 20mm) as sub main with one run of continuous earth wire of copper conductor FRLS grade cable of 6 Sqmm and connecting to common earth dolly all complete all as specified and directed by Engr-in-charge. Note : 2 run of copper conductor cable, one run of copper earth wire and one run of PVC conduit shall be maesured as One Unit length for payment purpose.

M&L of two run single core PVC insulated cable with copper conductor multi stranded, FRLS grade of size 4 Sqmm in and incl. duly drawn through and including concealed PVC conduit suitable size (not less than 20mm) as sub main with continuous earth wire of copper conductor FRLS grade of 4 Sqmm size and connecting to common earth dolly all complete all as specified and directed by Engr-in-charge. Note : 2 run of copper conductor cable, one run of copper earth wire and one run of PVC conduit shall be maesured as One Unit length for payment purpose.

S&F Piano switch flush button single pole one way 6 Amp.

S&F for socket outlet 5 Amps, 5 pin flush type, 240 volts with polycarbonate body complete all as specified and directed.

S&F for socket out let, 6 pin 5/15 Amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body.complete all as specified and directed.

M&L for switch piano flush type Single pole one way 15 Amps 240 volts with polycarbonate body complete all as specified and directed

S&F in replacement Sheet metal Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 V

Supply and fix in replacement sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 8 way Double door with 200 Amps rated busbar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

S&F MCB SP 6-32 Amps,"B" series 240 Volts complete all as specified and directed.

S&F MCB SPN 32 Amps,"C" series 240 Volts complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling rose surface backlight, 65 x 50 mm three terminals complete all as specified and directed.

Supply and fixing in replacement LED Tube light fitting 20 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting complete all as specified and directed.

Supply and fixing in replacement LED Tube light fitting 10 W,mirror type, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting complete all as specified and directed.

S&F in replacement energy efficient LED building secruity lights 1x35W with lens, PDC aluminium body and toughened glass visor fitted in frame secondary optical lens for superior light distribution efficay >100 Lm/W, CCT 5700K, IP-65/66 complete with bracket/clamps, nut bolts and washers suitable for fitted in building all as specified and directed.

S&F Fresh Air fan 250 mm sweep, 240 Volt AC single phase completed all as specified and directed.

S&F exhaust fan heavy duty metal body with louvers of size 300mm sweep, 1400 RPM and fixing arrangements complete all as specified and directed.

Supply and fix BLDC fan energy efficient ceiling fan sweep size 1200mm, 3 aerodynamically designed blades with speed 350 rpm motor air delivery 220cmm input power 28W-32W and having remote control complete all as specifed and and directed.

Supply and fixing Storage water heater (Geyser) of 1500 watt, 25 lts cap, BEE 5 star rating complete with water pipe line connection incl cutting the existing pipe complete all as specified and directed by Engineer-in-Charge. Note: PVC connection 02 Nos (for hot& cold water inlet and outlet) upto 1 mtr length of each included in the unit quoted rate.

M & L in repairs earthing complete with galvanised steel earth plate electode 600 x 600 x 6.0 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level connected to & including galvanised steel wire 4.0 mm dia size means of nuts and bolt check nuts and washers of galvanised rion sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to earthing test point complete including testing filling of adquate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made out of 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed. NOTE: (i) The concrete pit shall be PCC 1:3:6 type C-140 mm thick pre cast cover slab of RCC(1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars @ 10 cm C/C on both SI-des with suitable cast iron handle shall be provided in lieu of cost iron cover shown in the electrical plate No.3 of MES SSR Part -1 (ii) item includes the cost of 7.5 m GI pipe for protection of GI wire. (iii) PCC pits extra cost of addtional length of watering pipe,bends elbows etc.shall be deemed to be included in the quioted rate. (iv) Item includes the cost of 7.5 mtr length Galvised wire 4 mm dia.

Net Contract Sum will be after deducting Sch of Credit of Rs 3,883.00

MAA VAISHNO INDUSTRIES (BID ID -3431457)

HANUMAN BUILDERS (BID ID -3429509)