PROVN OF 06 LADIES TOILET (EACH WITH 4 WCS) AT JC WING, SC WING NEAR CENTRAL LEC HALL AND STUDENT OFFRS MESS AT AWC UNDER GE (AWC) MHOW.

Amount

Exacavation in trenches, n. exc 1.5m wide and n. exc 1.5 m in depth for foundation etc or for shaft ,wall, cesspits, manholes, pier holes etc. n. exc 10 Sqm on plan and n. exc 1.5m in depth in any type of soil etc, complete all as specified and directed.

Description same as per Item No. 01.00 but depth exc. 1.50m but not exc3.00m, complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick, complete all as specified and directed.

Removing excavated material upto 250m distance and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. complete all as specified and directed.

M & L for RCC (design mix) M25 ( 20 mm graded aggregates) as in foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L for RCC (design mix) M25 ( 20 mm graded aggregates) as in Columns, pillars, peirs, posts, and struts complete all as specified and directed.

M & L for RCC (design mix) M25 ( 20 mm graded aggregates) as in Beams , cantilivers , bressummers , lintles over 1.5 M span complete all as specified and directed.

M & L RCC M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on walls, beams, and columns complete all as specified and directed.

M & L RCC M-25 (Design mix) using 20mm graded stone aggregate as Chajjas complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beam, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter surfaces for rough finished flat surfaces of concrete, complete all as specified and directed.

Use and waste of Formwork fair finished surface of concrete as in Square, rectangular or polygonal to sides of columns, pillars, posts, struts, piers etc.complete all as specified and directed.

Use and waste of fair finished surface of concrete Formwork to sides and soffits of floor or roof beam, beam hauchings, bressummers, lintels, shelves etc. including supports, overhangs, etc, complete all as specified and directed.

Use and waste of form work fair finished surface of concrete to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizointal or slooping) complete all as specified and directed.

Use and waste of formwork fair finished surface of concrete to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Use and waste of form work fair finished surface of concrete to edges of concrate flats, treads, breaks in floors, and roof n.exc 20 cm wide and sides of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide complete all as specified and directed.

S & F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl cracking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed

Description same as per Item No. 17.00 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc, complete all as specified and directed.

M & L brick work with fly ash modular bricks straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with fly ash modular bricks straight or curved on plan to any radius in half brick thick walls, built in in cement mortar 1:3 complete all as specified and directed.

M & L 40 mm thick Damp proof course in cement concrete 1:2:4 type B-0 with incorporating integral water proofing compound in the manner specified by the manufacturer and in the proportions indicated, to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. Note:-WPC will be measured and paid separately.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work, complete all as specified and directed.

M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement , complete all as specified and as directed.

M & L 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and smooth without using extra cement , complete all as specified and directed..

M & L Plastering 15 mm thick in two layers of 10 mm thick in bottom and 5 mm thick mixed with WPC of top layer in Cement Mortar 1:4 on brick wall/cement block wall or concrete surfaces, surfaces finished even and smooth without using extra cement , complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

Supply only liquid water proofing compound all as specified and directed.

M & L for preparation of newly plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M & L for applying 2 mm thick wall care putty on wall on internal new wall surfaces as per manufacturerer instruction complete all as specified and as directed

M & L for applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared wall putty surfaces of internal wall all including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as per specified and directed.

M & L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of cement primer, complete all as specified & directed.

M & L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L Hard core of broken brick of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface for under sub base of floor, plinth protection complete all as specified and directed.

M & L 100mm thick sub-base Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) complete all as specified and directed.

M & L non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:4, complete all as specified and directed

M & L coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl 10 mm thick rendering in CM 1:4 to receive wall tiles complete all as specified and directed.

M & L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, surface finished even and fair without using extra cement incl necessary use and waste of form work complete all as specified and directed.

S & F powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two portions upper portion shall have louvers with & incl 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jambs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

S & F factory made Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, all as specified and directed.

S & F 30 mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of M.S. tubes of 19 gauge thick & size 19mmx19mm for stiles and 15mmx15mm for top & bottom rails. M.S. frame shall have a coat of red oxide primer of approval make and shall be covered with 5 mm thick heat moulded plain colour PVC ‘C’ channel of size 30x50mm forming stiles and 5 mm thick wide pvc sheets for top rail ,lock rail and bottom rail on either side and 10 mm (5mmx2mm) thick having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30 mm widex5 mm thick pvc ,sheet suitable PVC sheet beading, and joined together with solvent cement on either side,and additional 5 mm thick pvc stripes of 20 mm width is to be struck on interior side of "C" channel using pvc solvent adhesive complete at site as per specification complete all as specified and as directed.

S & F aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all specified and directed.

S & F aluminium handles, size 150 mm cast type, anodised complete all as specified and directed.

S & F butt hinges, size 100 mm type C-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised ISI marked complete all as specified and directed

S & F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and directed.

S & F vitreous china wash down water closet pan (Pedestal pattern)white including fixing bolt and including plastic water closet seat white closed pattern with flat bottom cover with MS chromium plated hinging devices to matching colour complete all as specified and directed.

S & F 10 litres capacity PVC low level cistern ‘ white’ with inlet, float valve and handle including flushing pipe of PVC 32 mm dia and connection to pipes complete all as specified and directed.

S & F chromium plated fancy type stop cock/angle cock 15 mm dia cast copper alloy screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed, complete all as specified & directed.

S & F PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F 15 mm bore bib taps chromium plated fancy type cast copper alloy crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, and fixed complete all as specified and directed.

S & F vitreous china wash hand basin white or any colour , oval shape of size 550mmx400mm fixed and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe complete all as specified and directed.

Supply only 15 mm dia bore fancy type chromium plated pillar tap long body swan neck, cast copper alloy, with capstan heads, screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S & F brass chromium plated tubular towel rail, 20mm dia D type 60 cm long between flanges, complete all as specified and directed.

S & F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints with solvent cement fixed to walls/flooor incluidng clamping, complete all as specified and directed.

Description same as per Item No. 53.00 but bore of pipe 110 mm, complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) bends ( with or without access door ) any radius with solvent cement joints, fixed, complete all as specified and directed.

Description same as per Item No. 55.00 but bore of pipe 75 mm, complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) junction single, single (T) ( with or without access door ) equal or unequal, joints with solvent cement, complete all as specified and directed.

Description same as per Item No. 57.00 but bore of pipe 75 mm, complete all as specified and directed.

S & F PVC (SWR) nahani trap/floor trap with grating having diameter of outlet 75 mm including jointing to waste pipe with solvent cement , complete all as specified and directed.

S & F 110 mm bore PVC(SWR) vent cowl, complete all as specified and directed.

S & F 15mm bore GI tubing medium grade, with all fitting and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S & F 20mm bore GI tubing medium grade, with all fitting and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S & F 25mm bore GI tubing medium grade, with all fitting and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S & F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe, complete all as specified and directed.

S & F 25 mm dia Gun-metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe, complete all as specified and directed.

S & F Rotational moulded poly-ethylene water storage tanks (ISI marked) ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position, complete all as specified and directed.

S & F ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20mm bore pipe, screwed for iron pipe and fixed, (Minimum weight 25mm-455 gms.) complete all as specified and directed.

S & F Toilet paper holder of Brass chromium plated fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm bore pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position , complete all as specified and directed.

M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and incl rounding to edges of stone slabs, complete all as specified and directed.

M & L 15mm thick in rendring in CM (1:4) mixed with liquid water proofing compound as per mfg instruction over the conc while the conc is green finished even & smooth, complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M & L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete. (i) Cleaning of new rendered surfaces properly and drying the surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg / Sqm (iii) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. (iv) Applying two coats of bitiminous aluminium paint @ 200 Gram / Sq M (minimum) in two coats.

M & L Salt glazed stoneware drain pipes 150 mm internal bore of grade ‘A’ laid in trenches & jointed as specified, complete all as specified and directed.

M & L 1:3:6 type C-2 using 40 mm graded stone aggregate cement concrete bed to drain pipe including packing under and haunching against side of pipe for 150 mm bore of pipe, complete all as specified and directed

M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (FRLS)medium grade concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module, for mounting or housing modular switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch as per mentined below , complete incl making good of surafce with putty, and painting to match with the existing surface, complete all as specified and directed

Description same as per Item No. 75.00 but for One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch, complete all as specified and directed.

Description same as per Item No. 75.00 but for One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch, complete all as specified and directed.

M&L point wiring with 2.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (FRLS) medium grade concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour)with cast Iron / pressed steel modular terminal boxes any size/module, fixed conceiled in walls by means of brass screws incl modular cover plates and cover frme any size/module, for housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for 15 / 16 Amps socket outlet on independent board, complete incl making good of surafce with putty, and painting to match with the existing surface all as specified and directed.

S&F Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified and directed.

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular type 16 A, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S&F decorative ultra slim poly carbonate LED tube light fitting 4 feet long 22 watts with THD less than 15% very high effficiency suited for T-8 tube light luminare with system efficiency 120 lumens per watts, fixture lumen package should be ≥ 2200 lumen. High quality polycarbonate end cap in white finish and snap fitted to the housing complete all as specified and directed.

S&F wall mounted 10 watts LED batten 2 feet long comprising extruded aluminium heat shrink provided for efficient heat dissipation & integrated electronic driver with aluminium housing system efficiency of 110 lumen per watt and lumen package ≥1100 lumen per watts, THD < 15% complete all as specified and directed.

M&L for LED Bulk head fitings of wattage 6 to 13 watts designed for modern homes available with premium quality diffuser for glarefree light and easy to install snapfit installer complete including taking down of old CFL/bulb bulk head fitting, making good of surfaces all as specified and directed.

S&F LED bldg security light fitting 30 watts made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-65 and IK-07 protection, THD < 10% , lumen output ≥ 110 lumen per watt complete all as specified and directed.

S & F MCB DB SPN 04 way double door 230 volt, 50 Hz complete all as as specified and directed.

S & F MCB SPN 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Note: Make of MCB shall be same as approved DBs

S & F MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacity complete all as specified and directed. Note: Make of MCB shall be same as approved DBs

M & L sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

S&F Exhaust fan non metalic single phase 230 volt of size 250 mm sweep with louver complete all as specified and directed.

S&F Exhaust fan, steel body AC single phase 230 volt of size 300 mm sweep complete with blade, frame and louvers all as specified and directed incl making/alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion all as specified.

Vinayak Trading House

Goyal Construction

Chitragupta Construction

SANJAY ENTERPRISES