SPECIAL REPAIRS TO JCOS MD ACCN BLOCK NO XI 1ST FLOOR M 64 AT MANDIR VIEW OF MRC UNDER GE WELLINGTON

Amount

Demolition of cement Concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level all as specified and directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Glazed coloured ceramic tiles in vertical surfaces of size 450x350x7mm thick as in dados, skirting, set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigments to match over the surface and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor all as specified and directed.

20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed in cement mortar 1:6 all as specified and directed.

Granite 20mm thick machine cut, in skirting / dado over and including 10mm thick rendering in cement mortar 1:4 on stone/ brick masonry surfaces, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing all as specified and directed.

Rounding edges of stone slabs one edge such as steps, cooking platforms and other similar situation, complete all as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 at sunken floor finished smooth and even without using extra cement including using liquid integral WPC as per manufacturer instructions complete all as specified and directed. Note: Supply of integral water proofing compound will be measured and paid seperately.

Applying waterproof and damp proof treatments a uniform coat of blown grade bitumen 85/25 @ 1.20 Kg per Sqm conforming to IS 702/cold applied bituminious elastomeric coat over a coat of primer in sunken floor/ plaster including preparing surfaces all as specified and directed.

APP modified prefabricated polymeric membrane, 4mm thick and weighing not less than 4.5Kg/Sqm reinforced with non woven polyster mineral finish weighing not less than 100 gm/sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300N / Sqcm, side lap & end lap 10cm, with torch application of membrane in suken portion complete all as specified and directed.

20mm thick cement mortar 1:4 screed mixed with liquid proofing compound over APP membrane in sunken floor all as specified and directed. Note: Supply of integral water proofing compound will be measured and paid separately

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.

40mm dia light grade GI spout at the lowest point with 30cm projection beyond the outer face of the wall in sunken floor all as specified and directed.

The RCC floor/wall surface to be checked for voids / honeycombs and marked for pressure grouting. Also the cold joints ( Construction joints) to be marked and pvc nozzles fixed every 1m c/c or as required as per site conditions with polymer mortar and pressure grouted with cement slurry @ 40 Psi or 2 kg/sqcm pressure admixed with DR FIXIT PIDICRETE AM (Admixture) 225 gms/per bag of cement and finished the filled holes with Polymer mortar ( DR FIXIT PIDICRETE URP mixed 10% by weight of cement in cement mortar (1:3) and finished all as specified and directed.

The surface to be wire brushed and cleaned to remove all loose particles, debris, loose mortar, etc, till clear RCC slab is visible. Cracks , construction joints repaired with Crack Powder ( DR FIXIT CRACK X) OR Polymer mortar (Adding DR FIXIT PIDICRETE URP 10% by weight of cement to cement mortar (1:3) as per the width of the crack. The corners ( horizontal and vertical junctions ) to be haunched with Polymer mortar . The construction joints also to be filled with Polymer mortar. One coat of DR FIXIT PIDICRETE URP admixed with cement in the ratio 1: 1.5 applied as bond coat followed by 2 coats of DR FIXIT FASTFLEX (2 Component waterproof cementitious coating) at an interval of 6-8 hrs @ 5-6 sft/kg in 2 coats at 1.5mm DFT and finished. The coating to be raised 6 inches above the FFL if it is bathroom all as specified and directed.

The waterproofed surface plastered with cement mortar 20mm thick in CM 1:4 adding admixture DR FIXIT LW PLUS 200ml per bag of cement and finished. Note for item 16 to 17:- a) All water proofing works to be carried out by trained engineers of Dr Fixit applicators. b) Test the water proofed area (ponding test) by filling water/soaking the wall surfaces for at least 72 hours as the case may be and tested for leakage, seepage and to the entire satisfaction of GE. Test shall be done in presence of Engineer-in-Charge and a record for each sunken slab/waterproofed area shall be maintained. The treatment shall be carried out by authorised applicators of chemical manufacturer. Cost of testing is included in the rates quoted above. (c) A written guarantie in judicial stamp paper of worth Rs 100 /- to be obtained from the manufacturer / authorised applicator by the contractor for 5 years and submitted to GE alongwith RAR/ fianl bill for payment.

Supply only liquid water proofing compound all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store for 15mm bore pipe all as specified and directed

Taking up or down steel tubing and connections including cleaning for refixing or removal to store for 20mm bore pipe all as specified and directed

Supply, laying and testing steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete all as specified of size 15mm all as specified and directed

Supply, laying and testing steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete all as specified of size 20mm all as specified and directed

Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repairs of size 20mm dia (Minimum weight 25mm-455gms) complete all as specified and directed.

Gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe including fixed in repairs of size 20mm dia all as specified and directed.

Demolition and breaking up drain pipes of any description of any size complete all as specified and as directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

PVC (SWR) bends 110 mm any radius, complete all as specified and as directed.

PVC (SWR) bends 75mm any radius, complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia with access door complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia with access door complete all as specified and as directed.

PVC (SWR) Floor/ Nahani trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified.

Stack clamps out of 50mm by 5mm by flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 110/75mm bore of pipe, complete all as specified.

PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed

PVC (SWR) vent cowl of 75 mm bore of pipe complete all as specified and directed

Vitreous china wash down water closet pan (pedestal pattern) white with P or S trap including 32mm dia flushing pipe , seat and PVC seat cover (white) closed pattern with flat bottom & cover brass chromium plated hinging device, including connection to drain and to flushing pipe, antisyhonage pipe etc including fixed in repairs complete all as specified and directed.

PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets, including fixed in repairscomplete all as specified and directed.

Vitreous china wash basin, white, flat back, size 550x400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32 mm bore and of suitable length, 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm and fixed complete all as specified.

Chroumium plated fancy type long body 2 in 1 bib tap fixed with existing pipe and fixed in repairs all as specified and as directed. Make : KUP-35041 PM of JAQUAR

Angular Stop valves 15mm dia bore, cast copper alloy screwed down high pressure fancy type, chromium plated screwed both ends for iron pipe or unions fixed in repairs complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs all as specified and directed.

Health Faucet with 8mm dia, 1 m long flexible tube and wall hook with back flow preventer and fixed in repair all as specified and as directed MAKE:Cat No.ALD-577 of JAQUAR

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long and fixed in repairs all as specified and directed.

Supply, fixed in repairs Soap dish complete all as specified and as directed. Make:Cat No.ACN-1131N of JAQUAR

Brass CP Wall mixer for mixing hot & cold water with provision of over head shower with 115mm long bend pipe on upper side connecting legs and wall flanges screwed down for iron pipe 15mm dia bore complete including fixed in repairs all as specified and as directed. (Make : Cat No. CON- 273KNUPR of Jaquar or equivalent)

Over head shower rose 200 mm X 200 mm square shape single flow with shower arm square 450 mm long complete and fixed in repair all as specified and as directed.

Bib tap fancy type long body chromium plated 15mm dia complete including fixed in repairs all as specified and directed Make : Cat No CON-037KN/ 047KN of Jaquar or equivalent)

Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges and fixed in repairs all as specified and directed.

Sheet Glass shelves assembly corner consisting of 5.5mm thick sheet glass shelf 12cm wide with chroumium plated bracket guard and railing 60cm long complete all as specified and directed. Make: CAT No ACN-1173 of JAQUAR

Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete including fixed in repairs all as specified and directed.

PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement all as specified and as directed.

Stainless steel plate track of size 0.9 X 1.2 m of readymade item complete including fixed in repairs all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position all as specified and directed. Note: Cutting the parapets of roof with RCC cutter only.

RCC in type A-1(1:1.1/2:3) in Slabs supported on walls,beams and columns floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified.

Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm each all as specified and directed.

2nd class hard wood (sal / Hollock) wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

30mm thick glazed and skeleton, shutter, open rebated and prepared to receive glass, gauze etc but divided into squares with plain chamfered or rounded, mitred and rebated sah bars, any numbers the size of member of shutter as specified in SSR Pt-I section 8 clause 8.24 (a) supplied and fitted to chowkats using second class hard wood all as specified and as directed.

2nd class hard wood made plain framed panalled door shutter 35 mm thick (any number of panel) with veneered particle board medium density, wood particl board with commercial face venners.

3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane all as specified and directed.

PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and as directed

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple fixed in repairs all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads sheet glass 3mm thick ordinary quality and glazing with oil putty and beads in square not exceeding 0.5 sqm in each pane all as specified and as directed

Dismantling boarding/ ceiling board of any description fixed in any position with nails complete all as specified and directed.

18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination, and other side balancing white lamination fixed with screws to timber/ steel frame work including external lipping as requied complete all as specified and directed.

2nd class hard wood of sectional area exceeding 6 sqcm but not exceeding 13 sqcm for plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

Extra over rates of 18/19mm thick block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nail complete all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 40mm complete all as specified and directed.

Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed all as specified and directed.

75mm Stainless Steel handles polished bright complete all as specified and as directed.

Stainless steel butt hinges medium weight 100 mm long complete all as specified.

Butt hinges, 75 mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminum anodized barrel tower bolts of extruded section 200 mm long all as specified and directed.

Aluminum anodized barrel tower bolts of extruded section 100 mm long all as specified and directed.

Aluminum handles, fabricated type ,anodised extruded section 150 mm long all as specified and directed.

Aluminum handles, fabricated type ,anodised extruded section 100 mm long fixed in repairs all as specified and directed.

Aluminum handles, cast type ,anodised extruded section 150 mm long fixed in repairs all as specified and directed.

Butt hinges of size 100mm, medium weight cold rolled mild steel for wooden/steel chawkhat and door etc and fixed in repairs complete as per site requirtment.

Butt hinges of size 75mm, medium weight cold rolled mild steel for wooden/steel chawkhat and door etc and fixed in repairs complete as per site requirtment.

Aluminum anodized barrel tower bolts of extruded section 200 mm long fixed in repairs all as specified and directed.

Aluminum anodized barrel tower bolts of extruded section 150 mm long fixed in repairs all as specified and directed.

Aluminum anodized barrel tower bolts of extruded section 100 mm long fixed in repairs all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor over all length of cover plate 150mm all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor over all length of cover plate 150mm and fixed in repairs all as specified and directed.

Preparation of old steel surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

preparation of new or previously untreated wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Preprtion of old wooden surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Mild steel work as in hold fast conforming to Fe-290 Gde-165 all as specified and directed.

Plain Cement Concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) as in bed blocks for hold fast including use and waste of form work all as specified and as directed.

300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed in repairs all as specified and directed.

Mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works all as specified and directed.

Preparing surfaces of small articles such as stop, covers, gully, gratings, hold fast, etc area not exceeding 0.1 Sqm each of any description and grith, not otherwise described and treated with or coal tar black paint all as specified and directed.

Fancy type decorative drapery rod 20 mm dia incl side caps and brackets, as in repairs complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed

Rendering 10mm thick on fair faces of brick/concrete/RR Masonry surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete as specified and directed.

Rendering 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceiling finished even and smooth without using extra cement complete as specified and directed

Plastering 5mm thick in cement mortar 1:4 with WPC over a coat of 10mm thick in cement mortar 1:6 on stone wall surfaces finished even and smooth without using extra cement etc complete as specified and as directed.

Preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion Paint ( Anti Fungal) white or tinted over a coat of primer over two coats of external wall care putty as approved by GE complete all as specified and directed

Preparation of new walls surfaces and applying two coats of Oil Bound Distemper over a coat of putty and primer as per Manufacturers Instructions and all as specified and directed.

Preparation of new surfaces of plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.

Preparation of old treated of wall surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moss and efflorescent and treating oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.

Preparation of old treated of ceiling surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moss and efflorescent and treating oil and greasy spots etc and applying One coat of white wash complete all as specified and directed.

complete removal of existing treatment of wall surfaces and applying two coats of Oil Bound Distemper washable over a coat of primer, over One coats of wall care putty 2-3 mm thick in two layers including sanding and preparation of surfaces to a true, even and smooth complete all as specified and directed. Note :- Putty will be measured and paid separately.

Wall Care putty on wall avg thickness 2- 3 mm in two layers complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified.

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and as directed.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4,complete all as specified and as directed.

75 mm thick Cement concrete type C1, 1:3:6, using 20 mm graded aggregate in plinth protection and hard standing finish even and fair complete all as specified and directed.

Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in cement mortar 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

Mild Steel TMT bar 8 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Cement concrete in surface channel and drains of type B2, 1:2:4 using 40mm graded aggregate, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds,mitred/stopped ends etc, all as specified and directed. Note: Inner girth will be measured only.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish to match with the existing surface of walls, floors, etc. all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multistranded copper conductor single core cable 1100 volts grade in and including PVC surface conduit medium grade complete with conduit fittings/accessories with provn of 1.2 mm thick MS terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed multistranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light point controlled by one switch all as specified and directed.

All as per Item No 122 hereinbefore but One 5A 2 pin / 3 pin switch socket outlet multipurpose on independent Board all as specified and directed.

All as per Item No 122 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 5/15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Switch piano flush type 5 A 240 volt SP, one way all as specified and directed.

Switch socket combination 2 in 1, 3 pin 5 Amps flush type multi purpose 240 volts all as specified and directed.

Switch socket combination 2 in 1, 5 pin 15 Amps flush type multi purpose 240 volts all as specified and directed.

Ceiling rose 3 terminals PVC/ Poly carbonate isolated body including base block 230 volts, AC single phase complete all as specified and directed.

LED tube light along with fixture 20W all as specified and directed.

LED mirror light along with fixture 10W all as specified and directed.

Cutting chases in stone masonry wall/ concrete floor / roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3 and making good cutting not exceeding 20cm girth all as specifed and directed.

K.AYYAPPAN

AR Mohamed Yakub and Co