Construction of Storm water drain and culvert at Murugan Nagar in ward No.9 East Zone.

Earth work excavation for foundation in all of soils and sub soils to full depth as directed by the departmental officers except hard rock inclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rarnmed and consolidated and depositing the surplus earth with in the compound in places shown by the departmental officers with inital lead of 10 meters and initial lift of 2 meters including cost of all labour charges etc., complete as per standard specification 23 & 24 VI S2 vll.9 10

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering with steel centering for revetment, drain and culvert Above 1.20m depth using MS sheet of size 0.90X0.60m 10 gauge thick and stiffened with MS 'L’ angle wood runners of size 0.075 X 0.05 three rows with support by casurina pullys 0.075 cm at 0.45 m length including cost of nails etc., Area. 10.80 sq.mtr (above 4 Feet)

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supply and erecting centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC slabs, Rectangular beems, Tee (or) ECC Beam, Lintel, Bed Block, Staircase waist and landing siabs landing beams, canopy etc., in all floor with ail cross bracings using mild steel sheets of size 90cm X 6Ocm and BG 10 stiffened with welded miid steel angles of size 25mm X 25 X 3mm for boarding laid over country wood joinsts of size 10cm XK 6.50 cm spaced at about 90cm C/C and supports by Causrina props of 10cm to 13cm dia spaced at 75cm C/C etc., completed as directed. SI.No.123

Supply and fabrication of RTS rods of various diameters including bending, cutting, placing in POSItion including the cost of binding wire, labour charges etc., complete as directed

Reinforced Cement concrete in 1:1.5:3 (one cement, one and half sand and three metal) using 20mm hard broken metal to the standard specifications etc complete

Plastering in Cement Mortar 1:5 mix 20mm thick, including all labour etc., Complete.

Supply of RCC Precast salb 100mm thick in in C.C 1:2:4 mix using 20m baby jelly includiingwater,curing, moulding charges etc., complete.

Supply and Fixing of Heavy duty circular 600mm x 600mm dia charge etc., complete.