MAINTENANCE / REPAIRS TO RCC /PVC UNDERGROUND SUMPS /OVERHEAD TANKS,FIRE FIGHTING TANKS WATER FILTRATION EQUIPMENT, AT AREA UNDER GE (NW) MANKHURD

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and not exceeding 10 sqm on plan and getting out in hard / dense soil etc. complete all as specified and as directed.

Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25 cm deep in soil complete all as specified and as directed.

Removing excavated materials to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point in soil including spreading in low lying area and leveling complete all as specified and as directed.

M&L for reinforced cement concrete nominal mix M-20 (using 20 mm graded stone aggregate) for foundations, including rafts, footings, foundation beams, plinth beams, bases for column etc and mass concrete, complete all as specified and directed. (Note - Reinforcement and form work will be measured and paid separately).

M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, side and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, for rough finished surfaces of concrete, complete all as specified and directed.

Supply & Laying fixing, connecting and testing steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings,and fixed to wall / ceiling or laid in trenches / floors including taking up or down steel water tubings and connections complete all as specified and directed for 20 mm bore.

Ditto all as per item No 06 above but 25 mm dia bore complete

Ditto all as per item No 06 above but 40 mm dia bore complete

Ditto all as per item No 06 above but 50 mm dia bore complete

Ditto all as per item No 06 above but 80 mm dia bore complete

Supply and fix in repairs ISI Marked UPVC Pipe of size 50 mm nominal dia, pressure pipe Schedule 80 with all connected acessories like UPVC bend,Tees,Unions,Sockets etc for each 3 mtr length of Pipe & solvent to join it all as specified and as directed. Make: Supreme / Dutron / Finolex / Duplon

Ditto all as per item No 11 above but 40 mm dia bore complete

Ditto all as per item No 11 above but 25 mm dia bore complete

M&L for cleaning static water tanks by draining out entire water, removing sludge, mud, etc., brushing / rubbing with wire / nylon brush / mop to remove all algae / fungal growth and moss, etc. entirely from walls, floors, etc. washing clean with fresh water by using water jets and then again washing and treating with one coat of lime and writing in approved font of size 2 inches the 'Date of cleaning' and capacity of tanks in black synthetic enamel paint over a white base and rubbishing off the premises complete all as specified and as directed by the Engineer-in-charge for 65,000 litres capacity.

Ditto all as per item No 14 above but 1,00,000 litres capacity

M& L for draining out water complete cleaning & removing accumulated sludge/ dirt, scales from bottom of walls / ceiling / top of slab and from mouths of circulating pipes of service tanks/ PVC tanks of capacity not exceeding 500 litres, located on roof of bldgs and disinfecting the tank using bleaching powder to make the tank bacteria free and depositing the rubbish in low lying areas of defence land, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground " cleaned on (date) due on (date) " 100 mm high complete all as directed.

Ditto all as per item No 16 above but capacity of tank exceeding 500 Ltrs and upto 1000 Ltrs

Ditto all as per item No 16 above but capacity of tank exceeding 1000 Ltrs and upto 2000 Ltrs

Ditto all as per item No 16 above but capacity of tank exceeding 2000 Ltrs and upto 3000 Ltrs

Ditto all as per item No 16 above but capacity of tank exceeding 3000 Ltrs and upto 5000 Ltrs

M & L for cleaning of over head reservoir by draining out water,removing sludge, alge-fungi growth from walls/floor, roof by rubbing with wire brush and disinfecting the reservoir with bleaching powder, draining out and making reservoir totally clean and marking cleaning date and due date for Over head tank 1.25 lakh Gln capacity all as specified and directed.

All as per item No 21 above but capacity of over head tank 0.50 lakh Gln capacity

All as per item No 21 above but capacity of over head tank 0.10 lakh Gln capacity

Cleaning of underground / semi underground sump by draining out sludge from bottom, by blocking all inlet / outlet, removing alge-fungi growth from wall, floor, ceiling by wire brush/ water jet pressure machine, cleaning complete surface and dis-infecting with bleaching powder and marking cleaning date and due date for 270000 Glns capacity all as specified and directed.

Ditto all as per item No 24 above but capacity of over head tank 200000 Glns capacity.

Ditto all as per item No 24 above but capacity of over head tank 100000 Glns capacity.

Ditto all as per item No 24 above but capacity of over head tank 50000 Glns capacity.

Ditto all as per item No 24 above but capacity of over head tank 20000 Glns capacity.

Ditto all as per item No 24 above but capacity of over head tank 10000 Glns capacity.

Ditto all as per item No 24 above but capacity of over head tank 5000 Glns capacity.

Dismantling of existing Chemical dozing system and transport to workshop for repair including replacement of pump with capacity 10 Lpm with Power input 230V, 50 Hz, 40SPM 1/3 fractional Horsepower, Max output 10 ltr/hr with mandatory accessories like Lead tubing, connecting ferrules, check valves etc complete refixing back at site all as specified and as directed.

Supply and laying XLPE insulated, 10 sqmm 3 core armoured heavy duty 1100 volt grade electric LT UG cable with aluminum conductor, laid in trenches on walls, surfaces, cable ducts etc complete including taking down old unserviceable cable as required at site and as directed by the Engineer-in- charge. Make: Polycab / KEI / Anchor / Gloster

Supply and laying XLPE insulated, 6 sqmm 2 core armoured heavy duty 1100 volt grade electric LT UG cable with copper conductor, laid in trenches on walls, surfaces, cable ducts etc including cable gland,copper lugs and making all connections complete including taking down old unserviceable cable as required at site and as directed by the Engineer-in- charge. Make: Polycab / KEI / Anchor / Gloster

Ditto all as per item No 33 above but 10 sqmm 4 core complete.

Ditto all as per item No 33 above but 16 sqmm 4 core complete.

Ditto all as per item No 33 above but 25 sqmm 4 core core complete.

M&L for taking down old unsv and supply & lay 6 Sqmm 3 Core size multistranded copper conductor PVC unsheathed 650 / 1100 Volt Grade As per IS 694 with necessary saddle, clamps, bolts & nuts, all For connection from panel to motor etc all as directed. Make :- POLYCAB / KEI / HAVELLS / ANCHOR (PANASONIC)

S & F in repairs CI sluice valve with flanged end, cast iron body, flanged and drilled end, confirming to IS-14846, ISI marked class PN 1.6 of size 100 mm dia including all joints with rubber or fiber board, gaskets, nuts and bolts washers, iron wheel all as specified and directed including taking down old unserviceable valves complete. Make :- Kirloskar / Upadhaya / kartar

Ditto all as per item No. 38 above but of size 80mm dia bore complete.Make :- Kirloskar / Upadhaya / kartar

Ditto all as per item No. 38 above but of size 150mm dia bore complete. Make :- Kirloskar / Upadhaya / kartar

S&F in repairs gunmetal gate or globe valve for 50 mm dia, conforming to IS-778, ISI marked, with iron wheel head screwed at both ends for iron pipes or ferrule and fixing including necessary fittings like unions, check nuts, etc and any addition / alteration required for fixing, complete including taaking down old unserviceable valves all as specified and as directed. Make :- Leader / Zoloto / Shakti

Ditto all as per item No 41 above but 40 mm dia bore complete. Make :- Leader / Zoloto / Shakti

Ditto all as per item No 41 above but 25 mm dia bore complete. Make :- Leader / Zoloto / Shakti

Ditto all as per item No 41 above but 20 mm dia bore complete. Make :- Leader / Zoloto / Shakti

S & F in repairs cast iron Foot valve 80 mm, Ball type with flange joint model B-05 (N) conforming to IS with MS nuts bolts, washer, rubber gasket etc., any pattern as approved including taking out / dismantling old unserviceable one and testing complete all as specified and as directed. Make : KIRLOSKAR / UPADHAYA / LEADER / OR BEST AVAILABLE IN MARKET

Ditto all as per item No 45 above but 50 mm dia bore complete.

Ditto all as per item No 45 above but 100 mm dia bore complete.

Ditto all as per item No 45 above but 150 mm dia bore complete.

Supply and fix in repair Cast Iron Non Return valve of size 50 mm dia with gun metal seat threaded type ISI marked including dismantling old unserviceable NRV 50 mm bore complete all as specified and directed. Make : KIRLOSKAR / UPADHAYA / LEADER / OR BEST AVAILABLE IN MARKET

Ditto all as per item No 49 above but 80 mm dia bore complete.

M&L for renewal of valve pit of size up to 80 cm x 80 cm x 80 cm (internal diamension), stone / brick construction including all necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, PCC in foundation for mix (1:2:4) type D2 brick mansonary in cement mortar (1:4) rendering 12 mm duck in cement mortar (1:4) internally ,finished even and fair and polishing flush externally as the work proceeds in the same mortor. Mild steel angle iron 40 x 40 x 6 mm frame MS sheet cover 3.15 mm thick with handle and locking arrangement, painting all exposed MS work with two coats of synthetic enamel paint of the that as approved by the Engineer - in - charge over a coat of red oxide primer and painting all the MS embeded in PCC with two coats of black bitumenous paint complete all as specified.

S&F in repairs weighted suction line strainer of size 3/8'" suitabile for existing altoch dosing system including taking down old unserviceable strainer complete all as specified and as directed. Make :- Best available in market

S&F in repairs white suction/discharge tubing of size 3/8" including taking down old unserviceable old suction tubing all as specifed and as directed. Make :- Best available in market

Dismantling of old UNSV / rusted steel tubular / RCC poles 9 mtr long including necessary disconnecting of cables and removing from site complete all as specified and directed. Note-: Serviceable poles fixtures shall be keep aside for reuse.

M & L for TMT bars of Fe-500 D grade conforming to IS:1786, 12 mm dia, including cutting to length, bent to shape equired, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc, complete all as specified and directed.

M & L for TMT bars of Fe-500 D grade conforming to IS: 1786, 10 mm dia bars as in binders, spacers, strippus including cutting to length, bent to shape required, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc, complete all as specified and directed.

M & L for TMT bars of Fe-500 D grade conforming to IS: 1786, 6 mm to 8 mm dia bars as in binders, spacers, strippus including cutting to length, bent to shape required, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc, complete all as specified and directed.

M & L for DI fittings class K-12 conforming to IS: 9523/2000 upto 200 mm dia of any type, size, such as bend, tapper, tail piece, tee piece, cross etc complete all as specified and directed.

Supply, erect and connection of hot dip galvanised octagonal poles of height 6 mtr with 130 mm bottom & 70mm top made up of 3 mm thick HT sheet along with base plate of size 200 x 200 x 12mm thick including 4 Nos of M20 x 600 long J type foundation bolts and 1 mtr long hot dip galvanised single arm standard bracket, including MCB of 6 Amps, with connector 4 way to be provided as termination point complete all as specified and directed. Note-: (a) Two run of cable protection pipe (UPVC) shall be provided in PCC foundation and rate shall be included in the quoted rate. (b) Foundation of pole shall be as per OEM recommendation and shall be paid in seperate item. Make :- Bajaj

Supply only Calcium hypo chlorite 65% -70% chlorine content granular based water disinfectent in sealed containers complete all as specified and as directed. Make:- 1.Aqufit manufactured by Sree Rayalaseema Hi strength Hypo Ltd. 2. Puri chlor manufactured by Sree Rayalaseema Hi strength Hypo Ltd. / M/s Ravi Enterprises / M/s Potter & Watts (Traditional products). Brands having pan india availability, acceptability & being manufactured /processed in open market termed as traditional products .The brands /makes must have certified by All India Institute of Hygenic & Public Health. 3. Best available in the market

Collecting water sample in clean bottle from location as directed for testing of physical test, chemical test, microbiological test as per IS-10500-1991 from NABL approved chemical laboratory and submitting test report complete.

Supply and install in repairs AFO (Auto fire off) fire extinguisher ball 150 mm dia (standard orange) with stand complete all as specified and directed.

Supply only DECPAC-P (Aluminium based caogulant) packing in 25 kg plastic bags complete.

Supply and fix in repairs 14 inch swimming pool flexibile vacuum head with side brushes all as specifed and as directed. Make: Uniquebella / Austin india / equivalent

Supplying, hoisting and fixing rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) conforming to IS -12701 hoisted and fixed in position all as specified in SSR Part-I of 500 Litre capacity, including taking down old unserviceable water tanks. Make:- SINTEX / RENO / EQUIVALENT

Ditto all as per item No. 65 above but of capacity 1000 Ltr .

Ditto all as per item No. 65 above but of capacity 2000 Ltr .

Ditto all as per item No. 65 above but of capacity 3000 Ltr .

Supply and fix in repair PVC Ball valve 20 mm bore ISI marked high presssure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed including taking down old unserviceable ball valves complete. Make :- PRAYAG / SHAKTI / AGROTECH

Ditto all as per item No 69 above but 25 mm bore complete.

Ditto all as per item No 69 above but 40 mm bore complete.

Ditto all as per item No 69 above but 50 mm bore complete.

Renewal of Earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal GL) with top edge of the plate not less than 1.50 mtr below normal GL, connected to Galvanized earth strip 32 x 6mm upto 7.5 mtr with protection pipe by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 40 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I 2009 specification.

Supplying, fixing, first aid fire hose reel drums, ISI Marked, IS No. 884 wall mounted fixed, swinging type as per site requirement, having hub as per IS 318, two sites swivel joing as per IS-318, including rubber braided 20mm hose pipe of length 30 mtr width threaded inlet connection and outlet connection including brass spray nozzle, ISI marked, IS- 444/1987, operating pressure 7 Kg/Cm2, Desigining pressure 21 Kgs/Cm2 complete in respect, including hand controlled branch pipe & 01 Nos 20 mm dia gun metal ball valve and all as specified and directed.

Material and labour for preparing old painted steel pipe surface such as Rising pipe (Red), Delivery pipe (Blue), Overflow pipe washout pipe (Yellow) etc and applying one coat of synthetic enamel paint for 100 mm bore GI pipe complete all as specified and as directed.

All as per item No. 75 above but 80 mm bore GI pipe.

Supply & Fix in repair fully automatic star delta starter suitable for 25 HP, 440 volt, 3 Ph Elect Motor with Single Phase Protection feature conforming to IS -13947 after taking down old unserviceable one anf fixed to the same location by making electrical connection properly complete all as specified and as directed. Cat No: SS91855 of Make-L&T or equivalent to C & S / Schneider / CROMPTON

All as per item No 77 above but for eletrical motor 10 HP, Model MK1 FASD of L& T Make, CAT Pat: SS96254 or equivalent to C & S / Schneider / CROMPTON

All as per item No 77 above but for eletrical motor 40 HP, Model MK1 FASD of L& T Make, CAT Pat: SS94366 or equivalent to C & S / Schneider / CROMPTON

S&F in repairs Direct on line (DOL) starter in sheet steel enclosure AC 3 phase 415 volt 50 Hz suitable for 5/7.5HP complete.

Dismantling of old unserviceable Indicator lamp and supply and install with Gen Next LED indicator 22.5mm size, 240V AC, complete with wiring with suitable wire complete all as specified and directed. Make- L&T

S & F of Amp meter digital type 0 - 200 amps capacity with suitable type ratio CT size as per existing including taking down the exsting and remove complete all as specified and as directed. Make :- C&S / schneider / AEI / L&T

S & F volt meter digital type 0 - 500 volt including taking down the existing and remove complete all as specified and as directed. Make :- C&S / schneider / AEI / L&T

M & L for preparation of old painted / unpainted surfaces of any description, including taking out of parts / components under painting (if required) from any position / location as listed under GE (NW) Mankhurd and applying one coat of epoxy paint (with colour code maintained as per relevant IS) including marking with flow directions (of approved colour) complete al as specified and as directed by the Engineer-In-Charge. (a) Induction motors-: 40 HP / 25 HP / - 08 Nos. (b) Electric motors-: 15 / 10 / 7.5 / 5 HP - 24 No. (c) Sluice valve-: 100 mm dia. - 06 Nos. (d) Sluice valve-: 80 mm dia. - 06 Nos. (e) Electric Panel Board-: 04 Nos

S & F in repairs cover PVC suitable for PVC sintax tank of any size including locking arrangement including removing broken PVC cover complete all as specified and directed. Make :- Best available in the market

S&F in repair display sign board of size 3 feet x 2 feet with writing letters (as required) on board and made by 3 mm thick ACP sheet with lumination on one side Retro venyl MS pipe Frame of 25 mm x 25 mm, MS pipe of 50 mm x 50 mm square post of height 6 feet from GL and fixed with PCC 1:2:4 type B-2 in ground upto 60 cm depth including necessary earthwork as directed by Engr-in-charge complete all as specified and as directed.

Dismantling the Solar hot water system of capacity 200 LPD capacity, cleaning, repairing, replacement of all unserviceable parts, Heating coil, Thermostat, Sensors, etc and commissioning and testing to make it operational / functional complete all as specified and as directed

Supply and fix in repairs hot water pipe duly insulted with glass wool and aluminium clading 25 mm bore complete all as specified and as directed

Supply and fix in repairs hot water pipe duly insulted with glass wool and aluminium clading 20 mm bore complete all as specified and as directed

M&L for Automatic water supply system installed at 'A' camp pump house, Nausena Baugh and Nofra Pump house under GE (NW) Mankhurd. The system comprises maintenance / servicing / repairs as required of all the sub systems viz. RTU based control panels (with all the accessories), Motorised valves, Pressure Switches, Ultrasonic Level transmisters, Pressure transmitter, Solenoid valves,GSM Modem,Trasducers, CTs, MIMIC panel etc. (with all its accessories), Personal computer, Printer, UPS, Mimic Panel and breakdown maintenance as and when required complete all as specified and directed by Engr-In- Charge.

Supply, installation, testing and commissioning of magnetic level sensor arrangement along with all necessary installation accessories. Make: RDS / MAHALAXMI / CRYSTAL/UNIVERSAL

Supply, installation, testing and commissioning of 10 mm dia Brass / SS, direct Acting / Diaphragm tpye pilot operated Solenoid Valve for air release with manual bypass arrangement along with all necessary installation accessories like gate valve, barrel piece, double nipple, elbows/bends etc suitable for line pressure of 6 kg/cm2 Make: ROTEX / AVCON / ASCO

Supply, Installation, Testing and Commissioning of Pressure Switch along with all necessary installation accessories like GI barrel piece, double nipple etc. having range 0-6 kg/cm2. With Weather proof enclosure. Make: INDFOSS / DANFOSS / SWITZER

Supply, Installation Testing & Commissioning of solenoid / Motorized valve suitable for 20 mm GI pipe for priming of pump including suitable bypass with necessary GI pipe and fittings like gate valve, barrel piece, double nipple, elbows / bends etc with following specifications: Size: 20 mm Pressure rating: 6 kg/cm2 Make: AVCON/ ROTEX/ ASCO/JOHNSON CONTROL

Supply, Installing,Testing and Commissioning of Ultrasonic Level Transmitter at Pure Water Sump ( for measurement of level in Pure Water sump ) Range : 0-5 metres Accuracy : 0.5 % minimum Supply Voltage : 24V dc Output : 4-20 mA Make : Banner / ABB/ SBEM / PEPPERL FUCH

Supply and fix in replacement Electric motor suitable for actuator for 150 mm dia. Motorized Butterfly valve (20 Kg/N to 30 Kg/N) complete all as specified and as directed. Make : UNIVERSAL /VAT/ROTORK

Supply and fix in replacement Electric motor suitable for actuator for 100 mm dia. Motorized Butterfly valve (20 Kg/N to 30 Kg/N) complete all as specified and as directed. Make : UNIVERSAL /VAT/ROTORK

Supply and fix in replacement Electric motor suitable for actuator for 80 mm dia. Motorized Butterfly valve (20 Kg/N to 30 Kg/N) complete all as specified and as directed. Make : UNIVERSAL /VAT/ROTORK

Supply and fix in replacement Printed Circuit Board (PCB) for Motorized Butterfly valve of size 50,80,100,150 mm complete all as specified and as directed. Make : UNIVERSAL / VAT / ROTORK

Supply and laying in repairs, 2 x 1.5 sqmm PVC insulated and PVC sheathed copper cable, laid in trenches on walls / drawing through pipe, surfaces, cable ducts etc complete including taking down old unserviceable cable as required at site and as directed by the Engineer-in- charge. Make: Polycab / KEI / Anchor / Gloster / Panasonic

Supply and laying in repairs, 4 x 1.5 sqmm PVC insulated and PVC sheathed copper cable, laid in trenches on walls / drawing through pipe, surfaces, cable ducts etc complete including taking down old unserviceable cable as required at site and as directed by the Engineer-in- charge. Make: Polycab / KEI / Anchor / Gloster / Panasonic

Supply and laying in repairs, 6 x 1.5 sqmm PVC insulated and PVC sheathed copper cable, laid in trenches on walls / drawing through pipe, surfaces, cable ducts etc complete including taking down old unserviceable cable as required at site and as directed by the Engineer-in- charge. Make: Polycab / KEI / Anchor / Gloster / Panasonic

Supply and fix in replacement of PLC with 60 Digital Input , 30 Digital Output, 16 Analog Input , 4 Analog Output and Expandable upto 192 DI / DOs, 2 Nos. RS 485 communication port, 1 Nos. Ethernet communication port, MODBUS compatiblity, Future expandablity to HARD Communication to identify instrument fault over SCADA as smart. MAKE:- SCHNIEDER / SIEMENS / ABB

Supply and Fix in replacement of Contactor Three Pole 415 volts 25 Amps AC 3 Rating, Conforming to Type MNX 25 & Cat No - CS94110 of L & T or Equivalentt from Schnider Electric, ABB including add on Blocks suitable for driving POWER Capacitors, including making addition/Alternation to existing Wiring/circuit system

All as per item No 106 above but Contactor Three Pole 415 volts 32 Amps AC 3 Rating Conforming to Type - MNX 32 & Cat no - CS94111 of L & T or equivalent from Schnider Electric, ABB/ C&S

All as per item No 106 above but Contactor Three Pole 415 volts 40 Amps AC 3 RatingConforming to Type - MNX - 40 & Cat no - CS94190 of L & T or equivalent from Schnider Electric/ABB/ C&S

All as per item No 106 above but Contactor Three Pole 415 volts 50 Amps AC 3 Rating Conforming to Type -MNX - 50 & Cat no CS-97075 of L & T or equivalent from Schnider Electric/ABB/ C&S

All as per item No 106 above but Contactor Three Pole 415 volts 70 Amps AC 3 Rating Conforming to Type - MNX - 70 & Cat no - CS-97076 of L & T or equivalent from Schnider Electric/ABB/ C&S

Maint/Cleaning of Pump house stations inside and out side area and removing of creepers and vegetation raised along with water supply installation including surface dressing around the E/M installation not less then 3 mtr from out side fencing and removing the all waste material from site and Chemical spray inside and out side area of Sub station. Note:- T & P will be arreanged by contractor

Supply and fix in replacement of water meter Analog type 50 mm installed at Naval Works premises, Woltman type (Removable mechanism) as per class B of ISO-4064/1 Magnetic drive with flange ends and hermitically sealed register feature and comprising of following features - Leak proof and sealed totaliser, Totaliser protected by metallic cover, Reliable sensitive metrology and low pressure loss, operating temperature 45oC and Minimum pressure of 20 Kg/cm2 etc including test & warranty certificate complete including taking down old unserviceable water meter as required at site and as directed by the Engineer-in- charge. Make:- Kranti / Capstan / Dashmesh Note : A sum of Rs 47195.00 towards sch of credit shall be deducted to arrive the contract sum.

Shree Ayyappa Engineering

cooltech engineering services