PROVN OF WASHROOM AT SPORTS GROUND

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out in hard/dense soil .

Returning ,filling in ,including spreading ,levelling,watering and well ramming in layers not exceeding 25cm in hard dense soil.

Removing surplus excavated soil to a distance exceeding 5 km but not exceeding 15 km and depositing where directed

Plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations ,fillling and mass concrete.

M&L for RCC design mix M-25 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for RCC design mix M-25 (20mm graded aggregate) in Columns, pillars, piers, posts and struts

M&L for RCC design mix M-25 (20mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span

M&L for RCC design mix M-25 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for RCC design mix M-25 (20mm graded aggregate) inchajjas etc.

M&L for flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete.

M&L for flat formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete.

M&L for flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete.

M&L for flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete.

M&L for flat formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide .

M&L for flat formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete.

M&L for TMT bars 10 mm dia over cut to length,bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.

All as above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Precast cement concrete block masonry with solid blocks exc 10 cm in width in PCC 1:2:4 type B-1 and setting in cement mortar 1:4 all as specified

Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) , in walls in PCC 1:2:4 type B-1 and setting in cement mortar 1:4 all as specified

M & L Rendering in CM 1:3, 5mm thick on fair faces of brick work or concrete surfaces on ceiling complete all as specified.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling.surface all as specified.

M&L for Rendering with WPC in CM 1:4, 15mm thick on othe than fair faces of brick work or concrete surfaces all as specified and directed. Note : WPC shall be measured and paid separately

Supply only Intergral waterproofing compound

M & L prepaeation newly plastered of wall surfaces and applying two coats of acrylic smooth exterior paint of required shade (applied @ 1.67ltr/10 Sqm) over and including priming coat of exterior primer @2.20 Kg/10 Sqm) all as specified .

M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but exceeding 0.11 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge..

M & L Glazed coloured ceramic tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge..

M&L for Rendering in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces all as specified and directed.

M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil- emulsion over a coat of primer over 3mm thick wall care putty on wall on wall all as specified and as directed .

Granite (of any type) tiles 20mm thick machine cut, bedded andjointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M&L for Screed bed or bedding layer of mortor 15 mm thick in CM 1:6 for laying floor finishes all as specified and directed.

M&L for Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub base of floor

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dado all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately).

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F 100mm long, Butt hinges, extruded brass, with brass hinge pin, bright polished and fixed, type B-11 all as specified and as directed.

S&F 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.

S&F 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed.

S & F Floor door stopper of brass body and tongue with hard drawn steel spring

S&F Aluminium (extruded section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suplying and fixing in opening as per specification and drawing etc complete all as specified.

S & F Factory made solid PVC Moulded door shutter with wood EPS, 30mm thick , with 2,4, or 6 raised panel design with 2mm thick moulded prelaminated PVC Sheet on both faces supplying & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed by Engineer-in-Charge.

S&F 75 mm long butt hinges, type C-22 extruded aluminium anodised with brass hinge pin, anodised and fixed and all as specified and directed

S&F 100mm long Aluminium anodised barrel towers bolts of extruded section and all as specified and directed

S&F 150mm extruded aluminium alloy handles, fabricated type anodised as specified and directed

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including seat cover and flush pipe etc complete all as per specified and as directed by Engineer-in-Charge.

S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 Ltrs capacity , low level , white, with inlet , ball valve, float and handle including brackets and flush pipe etc complete all as specified and as direted by Engineer-in-Charge.

S& F Vitreous China urinal including brackets complete all as specifed and directed. Make : Jaquar Model No -URS-WHT-13261 or equivalent.

S& F Vitreous China wash basin, white, flat back including brackets and pedestal complete all as specifed and directed. Make : Jaquar Model No QPS-WHT-7803PM (WHB) & QPS-WHT-7303PM (Pedestal) or equivalent.

S&F 32mm CP brass waste coupling 130mm high complete all as specified and directed. Make : - Jaquar Model No ALD -709L130 or equivalent

S&F two way Bib taps, brass chromium plated fancy type with wall flange screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore all as per specified.Make:- Jaquar Model No VGP-81041 or equivalent

S&F Bib taps, brass chromium plated fancy type with wall flange screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore all as per specified.Make:- Jaquar Model No VGP-81037 or equivalent

S&F chromium plated health faucet with hand held and spring operated control valve with PVC flexible pipe connection of suitable length,wall hook all as directed fixed to 15 mm bore pipe. Make :- Jaquar model No ALD-573.

S&F angular stop cock with wall flage screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore. Make : Jaquar . Model No :VGP-81053 or equivalent

S&F Pillar taps fancy type cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 15 mm bore. Make :- Jaquar Model No VGP-81001 or equivalent.

S&F 32mm size, 300mm CP bottle trap with 190mm long wall connection all as specified and directed. Make :- Jaquar Model No ALD-769L300x190 (or) equivalent

S & F PVC connections 15 mm size with PTMT nuts of length 600 mm. Make :- Jaquar Model No ALD-801B or equivalent

S & F 600mm long CP copper pipe with two nos nuts and bolts suitable for 15 mm bore fittings. Make : Prima model No PCP-3632 or equivalent

S & F towel rail 60cm long of brass chromium plated fixed with and including chromium plated brass screws. Make :- Jaquar Model No CAN-1111SM or equivalent

S&F Glass shelf with bracket . Make : Jaquar . Model No : CAN-1173 or equivalent complete .

S&F Soap dish holder . Make :- Jaquar Model No CAN-1131N or equivalent

S&F toilet paper holder. Make :- Jaquar Model No CAN-1153S or equivalent

S&F Soap dispenser with glass bottle . Make :- Jaquar Model No CAN-1135N or equivalent

S&F swivel mirror 630x445 mm rectangular shape . Make :- Jaquar model No AKP-35795 or equivalent.

S&F moulded polyethylene 1000 ltr water tank storage tanks (Triple layer) (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge.

S&F CPVC pipes 20mm outer dia SDR 13.5 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified

S&F CPVC pipes 25mm outer dia SDR 13.5 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&FMale Brass Threaded Adaptor (MTA/ MBTA) ) for CPVC pipe outer dia 25mm.

S&F Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC pipe outer dia 25mm.

S&F Tank Adaptor for CPVC pipe outer dia 25mm.

S&F union for CPVC pipe outer dia 25 mm.

S&F25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S&F CPVC Ball valve(gate valve) suitable for 25mm outer dia pipes

M & L 75mm dia for PVC (SWR) multi floor trap of with grating including jointing with solvent cement.

S & F in repairs 110mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp .

S&F 110mm radius PVC (SWR) bends complete .

S&F 110mm radius PVC (SWR) branch piece, single (single T) equal or unequal complete .

S & F in repairs 75mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete .

S&F 75 mm radius PVC (SWR) bends complete .

S&F 75mm radius PVC (SWR) branch piece, single (single T) equal or unequal complete .

M & L for 125/110mm dia PVC (SWR) gully trap includingsetting jointing with solvent cement.

S&F 110 mm bore PVC (SWR) vent cowl

S & F 50mm UPVC Pipes (SCH-40) complete all as specified and directed.

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer- in-charge.

S&F stainless steel wire cloth 00.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless stell wire staples.

S&F 3 mm figured glass, ordinary quality , n exc 0.5 sqm in each glass all as specified and directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface.

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

Supply and application of single component, seamless, spray applied, hybrid elastomeric PU based material i.e Nitoproof 725 of Fosroc chemicals (or) sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE over a coat of primer i.e Nitoproof WB primer of Fosroc chemicals (or) diluted sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE, all as recommended by manufacturer ans as specified. Note:-(i) Average minimum DFTof PU based material shall be 1mm and shall be applied by using a Graco pump. (ii) PU based material shall process the following properties solids by volume -65%, tensile strength ASTM D412-1.75Mpa, density 1.3 g/ml, elongation ASTM D-412-350%, Adhesion to substrate concrete-1.9Mpa, resistance to water-10m pressure. (iii) Rate are deemed to be include for cleaning and preparation of surface to receive PU water proofing system including filling of cracks with cementitious repair mortars i.e renderoc CS of Fosrock chemicals (or) equivalent of approved make. (iii) Work shall be got carried out by authorised applicator of the manufacturer and it shall be got approved by the GE before progressing the work. (iv) 10 years of guarantee shall be provided and security amount shall be deposited as speicified in tender documents.

M&L for concealed Point wiring one light point controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases and making good in wall / floor will be Measured and paid seperately.

All as per item No 92 herein before but one ceiling/exhaust fan point controlled by one, one way switch.

All as per item No 92 herein before but one switch socket outlet point 5 Amps on independent board.

S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed.

S&F socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular white cover plate with frame 3 module

All as per item No 97 herein before but 6 module

S&F flush box 3 module

All as per item No 99 herein before but 6 module

Supply and fixing LED lights fitting 1 x 22W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fix MCB DB, SPN, 8 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: L&T/Legrand/ Havells

Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, "B" Curve complete. Make: L&T/Legrand/ Havells

Supply and fixing SPN 32 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals.

M & L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board/ feedar pillar and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:2:4 type B-1 & RCC cover and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009. (i) The unit rate includes earthing wire, and protection pipe upto 7.5 metre.

M& L for making opening for fixing of Exhaust fan of size 300 mm sweep complete and making good the disturbed surface complete.

Supply and fix exhaust fan, steel bodyAC single Phase. 230V of size 300msweep with, blades, and frame andlouvers

Supply, install and testing PIR (Passive Infrared Sensor), high frequency motion sensor ARGUS presence high frequency high bay sensor- 2ch, surface mounting suitable for existing lights for ON/OFF/ dimming complete with all necessary accessories and testing all as specified and directed. Make: Sensinova India Cat No. SN- PRO5B Or equivelent in Hamilton Electronic/Schneider.

Removing excavated materials (soils) to a distance not exc 50m and depositing where directed at a level not exc. 1.5 m above the starting point

M&L for riddled earth filling in trenches above and below the cable as in cable protection. Note:- Punned thickness shall be mesured and paid.

Material and Labour in replacement for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, multi stranded, 1100 volts grade, cross-sectional area 10 Sqmm, 2 core with and including making connection by using necessary thimbles complete all as specified and directed

Supply and laid well burnt bricks sub-class 'B' designation 75 for cable protection, brick shall be laid dry flat as width of brick eqals to the length of cable and the gap between two adjacent brick shall not exceeded 10 mm, complete all as specified and as directed.

M&L for GI pipe 50 mm dia light grade with all fittings for cable protection laid under road/path/hard standing or fixed with wall/pole etc complete.

M&L for cutting of existing bituminous road/path/hard standing suitable for laying cable protection pipe 80 mm dia under the road/path/hard satnding at a depth not less than 60 CM below the normal ground level, Returning filling soil and making good the disturbed surface of road/path/hardstanding by using cement concrete mortar 1:3:6 type C2, using 40 mm graded stone aggregate 0.30 mtr wide and 0.30 mtr thick complete all as specified and directed.

On site LLDPE Conventional type septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 25 user.

Supplyng and laying of CPVC pipes outer diameter 50 mm SDR 11 & plain CPVC SDR 11 fitting all fitting such as union, elbow, socket, reducer, tee etc fixing on wall/ceiling or laying in floors/trenches laid under road/path/hard standing or fixed with wall complete all as specified and directed.

Supplyng and laying of CPVC pipes outer diameter 25 mm SDR 11 & plain CPVC SDR 11 fitting all fitting such as union, elbow, socket, reducer, tee etc fixing on wall/celling or laying in floors/trenches laid under road/path/hard standing or fixed with wall complete all as specified and directed.

S&F CPVC ball valve 50 mm for CPVC pipe SDR 11 complete all as specified and directed.

S&F CPVC ball valve 25 mm for CPVC pipe SDR 11 complete all as specified and directed

M&L for cutting and screwing existing pipes 40to 50 mm for alterations or additions and making connection / inserting suitable size tee and sockets for branch connection from main water line or lengthening screw on pipe to form connector complete all as specified

p.chinnasamy (BID ID -3129620)