REPAIR AND MAINT OF EXTERNAL ELECTRIC INCLUDING LT OHT LINES LT PANELS APFC PANELS EARTHING UG CABLES LT POLES STREET LIGHTS PERIMETER LIGHTS AND CONNECTED WORKS AT HAFT CHINAR TATTOO GROUND AND SONAMARG UNDER GE 970 EWS

Amount

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in looses/soft soil complete all as specified and directed.

Excavation in trenches exceeding 1.5 mtr wide and exceeding 1.5 mtr depth and getting out in looses/soft soil complete all as specified and directed.

Returing, filling in, including spreading leveling, watering and well ramming in layer not less than 25 cum each layer complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L filling of dry sand under and around LT cable to provide sand cushioing and in sub stn ducts/trenches complete all as directed.

M&L brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.

M&L PCC 1:4:8 type B2 (using 40 mm graded stone aggregate) as in foundation of pole & stay complete all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in filling of pole & stay complete all as specified and directed.

M&L PCC 1:2:4 type B2 (using 20 mm graded stone aggregate) as in copining of pole complete all as specified and directed.

Supply and fix in repair ACSR conductor including stringing on LT poles complete incl aluminium binding wires, jumpering, bindings at insulators etc complete all as specified and directed.

S&F of cross arm, bracings, supports , clamps and back plate fabricated from structural steel section, including nut , bolts , washers, welding , bendings cold or hot, drilling hole for both in any shape or size as indicated or directed and inclusive of one prime coat, one under coat and one finishing coat of paint including taking down the old unserviceable cross arms complete all as specified and directed.

Taking out old unserviceable PCC poles 9 mtr long and supply and erection of steel tublar swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts, screws as specified type 410 SP-31 (9.0 mtr long) and shifting of conductors and insulators etc including painting the exposed portion of the pole with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded portion with two coats of black bituminous paint over a coat of red oxide primer. Marking of pole number with black paint in yellow circle complete all as specified and directed.

Disconnecting the windings of loose overhead conductors of LT lines from insulators and restringing the same for proper sag and rewinding including aluminium winding wires, tapes etc and jumpering for any type of conductor complete of single run conductor complete all as specified and directed. Note: Quoted rate shall deemed inclusive of triming of tree branches around the poles upto 3 mtr

S&Fx in repair of insulator pin type porcelain vitereous , white brown or green insulator including one galvanised mild steel spindle, two galvinised washer and one GI nut 100 mm height and 65 mm dia for 1100 Volt grade complete all as specified and directed.

S&F in repair of insulator shackle type, porcelain, vitereous, white brown or green insulator including one galvanised mild steel straps, washers, insulator bolts, washer and nuts for working pressure 1100 Volts height 100mm, dia 115mm, section of strap (31x5) mm dia of bolt 14 mm complete all as specified and directed.

Supply, laying, jointing and testing of XLPE insulated, armoured, heavy duty LT under ground cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc for following sizes c/s area, including taking down old unservicable cables, complete, complete all as specified and directed. :-

16 Sqmm 2 Core.

16 Sqmm 4 Core.

25 Sqmm 3.5 Core.

35 Sqmm 3.5 Core.

50 Sqmm 3.5 Core.

70 Sqmm 3.5 Core.

95 Sqmm 3.5 Core.

S&F moulded case circuit breaker four pole 400 Amps, 35 KA capacity 415V 50Hz with adjustable thermal and magnetic relay including taking out the old unserviceable complete all as specified and directed.

S&F moulded case circuit breaker four pole 315 Amps, 35 KA capacity 415V 50Hz with adjustable thermal and magnetic relay including taking out the old unserviceable complete all as specified and directed.

S&F moulded case circuit breaker four pole 250 Amps, 35 KA capacity 415V 50Hz with adjustable thermal and magnetic relay including taking out the old unserviceable complete all as specified and directed.

S&F moulded case circuit breaker four pole 200 Amps, 25 KA capacity 415V 50Hz with adjustable thermal and magnetic relay including taking out the old unserviceable complete all as specified and directed.

S&F moulded case circuit breaker four pole 160 Amps, 25 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay including taking out the old unserviceable complete all as specified and directed.

S&F moulded case circuit breaker four pole 125 Amps, 35 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay including taking out the old unserviceable complete all as specified and directed.

S&F moulded case circuit breaker four pole 100 Amps, 25 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and directed.

S&F moulded case circuit breaker four pole 63 Amps, 25 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay including taking out the old unserviceable complete all as specified and directed.

S&F digital voltmeter 0 to 500 Volts 96mm x96mm flush type in LT Panels including taking out the old unserviceable complete all as specified and directed.

S&F digital ammeter range as per existing 96mm x96mm flush type in LT panels including taking out the old unserviceable complete all as specified and directed.

S&F LT current transformer ratio from 200/5 Amps or 100/5 or 400/5 in LT panels including taking out the old unserviceable complete all as specified and directed.

S&F indicator assembly (RYB) LED type in LT panel boards including taking out the old unserviceable complete all as specified and directed.

S&F tube light grade galvanised with all fittings laid along the pole/in trenches / under road or floor of 40 mm bore including removing the rusted old one complete all as specified and directed.

S&F tube light grade galvanised with all fittings laid along the pole/in trenches / under road or floor of 50 mm bore including removing the rusted old one complete all as specified and directed.

Supply and Fix in repair of 1100 Volts grade heavy duty cable PVC insulated aluminium conductor as service connections served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm dia GI suspension wire one twin core cable flat or circular stranded conductor of size 10 sqmm 2 core complete all as specified and directed.

Supply and Fix in repair of 1100 Volts grade heavy duty cable PVC insulated aluminium conductor as service connections served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm dia GI suspension wire one twin core cable flat or circular stranded conductor of size 16 sqmm 2 core complete all as specified and directed.

M&L in Fix in repair of Earthing complete with GI earth plate 60cmx60cm and 6mm thick electrode and 4mm dia GI wire as earthing lead burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and including earth work, PCC pit and RCC cover, watering pipe 20 mm dia light grade,funnel, wire mesh, protection pipe 15 mm dia light grade up to 7.5 mtr length of earth wire, charcoal dust and salt etc. and connected to earthing test point complete all as specified and directed.

S&F in Fix in repair of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 45W mounted on MCPCB suitable for 50mm dia pipe in gress protection IP-66 complete all as specified and as directed. Makes : Havell's cat part No. LHETAXU7PNJ045 or techno-commericially equivalent in approved makes.

S&F in Fix in repair of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 90W mounted on MCPCB suitable for 50mm dia pipe in gress protection IP-66 complete all as specified and as directed. Makes : Havell's cat part No. LHETAXU7PNJ090 or techno-commericially equivalent in approved makes.

S&F in Fix in repair of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 60W mounted on MCPCB suitable for 50mm dia pipe in gress protection IP-66 complete all as specified and as directed. Makes : Havell's LHETAXU7PNJ060 or techno-commericially equivalent in approved makes.

S&F in Fix in repair of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 70W mounted on MCPCB suitable for 50mm dia pipe in gress protection IP-66 complete all as specified and as directed. Makes : Havell,s cat part No. LHETAXU7PNJ070 or techno-commericially equivalent in approved makes.

Taking down after disconnection of old unservicable street/security/road/post top light fitting and supply and fixing of LED based energy saving & environment friendly long life versatile luminaire made in pressure die cast housing and heat sink with aluminium extruded with IP-65 of 30 watt complete with front toughened glass cover including connection with 2.5 sqmm 3 core PVC insulated copper wire complete all as specified and directed. Makes : Cat part No .BCLST 30W LED of Bajaj or techno-commericially equivalent in approved makes.

Taking down after disconnection of old unservicable of high mast light fittings and supply and fixing in replacement of LED based saving & enviorment friendly long life versatile flood light Lumos IP-65 of 100 W complete with front glass cover complete all as specified and directed. Makes : Bajaj Cat part No . BJFL 100W LED I WHITE or techno-commericially equivalent in approved makes.

Taking down after disconnection of old unservicable of high mast light fittings and supply and fixing in replacement of LED based saving & enviorment friendly long life versatile flood light Lumos IP-65 of 120 W complete with front glass cover complete all as specified and directed. Makes : Havell's Cat part No . LHFPCZBFP46J120 or techno-commericially equivalent in approved makes.

S&F in replacement of LED driver suitable for 72W complete all as specified and directed.

S&F in replacement of LED driver suitable for 90W to 120 W complete all as specified and directed.

M&L for cutting out the burnt out cable end and reconnecting with providing new lugs,tapes etc for cable size 25 sqmm 3.5 core to 50 sqmm 3.5 core complete all as specified and directed.

M&L for cutting out the burnt out cable end and reconnecting with providing new lugs,tapes etc for cable size 70 sqmm 3.5 core to 120 sqmm 3.5 core complete all as specified and directed.

S&F in Fix in repair PVC Line spacer of superior quality of 4 Way spiral type all as specified and as directed.

S&F in Fix in repair PVC Line spacer of superior quality of 6 Way spiral type all as specified and as directed.

Taking out old existing unservicable and supply installation, commissioning of CPRI approved LT panel board, outdoor, cubical, dust and vermin proof made out of 3.15 mm thick MS sheet and steel section with back door detachable type fitted with nuts, bolts and washers and frint doors openable type fitted with knobs and hinges CRCA sheet IP-43 grade protcetion and having locking arrangement including individual chamber for MCB and MCCBs having sufficient space for working. LT Panel shall be prewired with suitable size OVC insulated cipper conductor cable. The panel shall be powder coated and shall bemounted on angle iron frame made out of MS angle of size 50mmx50mmx6mm of height 30cm from floor level. The panel shall be be comprising of the following items :- Location :- Tattoo ground

(a) MCCB 400 Amps 35 KA, 415volts four pole with adjustable thermal setting - 01 No (Incomer)

(b) MCCB 100 Amps 25 KA, 415volts four pole with adjustable thermal setting - 02 Nos

(c) MCCB 200 Amps 25 KA, 415volts four pole with adjustable thermal setting - 01 Nos

(f) LED Indication Lamp - 03Nos

(g) Aluminium strip bus bar sleeve insulated 600 amps capacity four pole mounted on epoxy insulators - 01 No

(h) cable entry with double comprissioning glands and two with provision of two Nos earthing terminals.

(j) Internal wiring of panel board with single core copper cable PVC insulated of suitable size and control fuses.

Taking out old existing unservicable and supply installation, commissioning of CPRI approved LT panel board, indoor, cubical, dust and vermin proof made out of 2mm thick MS sheet and steel section with back door detachable type fitted with nuts, bolts and washers and frint doors openable type fitted with knobs and hinges CRCA sheet IP-43 grade protcetion and having locking arrangement including individual chamber for MCB and MCCBs having sufficient space for working. LT Panel shall be prewired with suitable size OVC insulated cipper conductor cable. The panel shall be powder coated and shall bemounted on angle iron frame made out of MS angle of size 50x50x6mm of height 30cm from floor level. The panel shall be be comprising of the following items :-

(a) MCCB 125 Amps 25 KA, 415volts four pole with adjustable thermal setting - 01 No (Incomer)

(b) MCCB 63 Amps 16 KA, 415volts four pole with adjustable thermal setting - 02 Nos

(e) LED Indication Lamp - 03Nos

(f) Aluminium strip bus bar sleeve insulated 300 amps capacity four pole mounted on epoxy insulators - 01 No

(g) cable entry with double comprissioning glands and two with provision of two Nos earthing terminals.

(h) Internal wiring of panel board with single core copper cable PVC insulated of suitable size and control fuses.

(j) ON Load Changeover switch of 4 pole, 415 volt, 200 Amps capacity - 01 No

M&L painting of steel tubular pole 9.0 mtr long, by applying one coat of alluminium paint after scraping / brushing and cleaning the rust on pole and cross arms . Alluminium painting will be done on pole above 1.5 Mtr hight from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and white enammelled paint ( 30 cms each) Pole Nos will be written on pole by black paint in yellow circle of 150mm dia complete all as specified and directed.

Supply and Fix in repair Off load change over switch in sheet metal enclosure of capacity 63 Amps, complete all as specified and directed.

Supply and Fix in repair On load change over switch in sheet metal enclosure of capacity 100 Amps, complete all as specified and directed.

Supply and Fix in repair On load change over switch in sheet metal enclosure of capacity 200 Amps, complete all as specified and directed.

M/S U.K. ENTERPRISES

M/S Noor Mohammad Shalla

M/S V L ENTERPRISES

FG CONSTRUCTION

M/S GHULAM HASSAN KUCHAY

Javeed And Co

M/S HAFIZ AND SONS