Construction of Inspection hut at Badami Bagh, compound walling and furnishing etc. of Leh Forest Range under SDP New Scheme for the year 2023-24.

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in witdth as well as 10 m2 on plan) including disposal of excavated earth land upto 50 meters and lift upto 1.5m, in all kind of soil.

Dry stone soling in horizontal level incl.cost of stone

Providing and laying in positon cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, 1:4:8 (1 ce,emt:4 coarse sand:8 graded stone aggregate 20mm nominal size) nallah

Random Rubble masonry with hard stone from nallah in foundation and plinth including leveling up with cemnt concrete1:6:12 (1 cement:6 nominal size) at plinth level with cement mortar 1:6 (1 Cement 6 coarse sand)

Reinforced cement concrete work in walls(any thickness), including attached pilnsters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutment's, posts and struts, etc, up to floor fieve level excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size.

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

Providing and fixing up too floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar. 1:3 ( 1 cement :3coarse sand), cost of required centering, shuttering and complete 1:3:6 (1 cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size) crushed.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in positon with hold fast lugs or with dash fnsteners of required dia and length .

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (35mm) second class kail 30mm

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (35mm) Second class kail.

centering and shuttering including strutting, propping etc. and removal of form for Foundations: footings, bases of columns etc. for mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Lintels, beams, plinth beams, girders, and cantilever

Suspended floors, roofs, landings, balconies and access plate form

Slabs and breaks in floors and walls 20cm walls

15mm Cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 cement:4 coarse sand)

6mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand)

Cement concrete flooring 1:2:3 stone aggregate 20mm N/S finished with a floating coat of neat cement including cement slurry,but excluding the cost of steps etc.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming with ready mixed pink or grey primer of approved rand and manufacture of wood work. (hard and soft wood)

Painting with synthetic enamel paints of approved rad ad manufacture to give o eve shade, two or more coat on new work.

Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12 n/s over and including fresh plastering two layer, under layer 10mm cement plaster Layer 12mm cement plaster 1:4 mix and 10 mm cement plaster with cement mortar with 10% finely grounded hydrated lime by volume of cement.

Distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer.

Providing and fixing of ISI marked oxidized M.S sliding bolts with nuts and screw etc.

Providing and fixing of Isi marked oxidized M.S sliding bolts with nuts and screw etc.

Providing fixing bright finished brass/aluminum handle with necessary screws 120mm

Providng and fixing bright finished brass/aluminum handle with necessary screws 120 mm

Providing and laying of glass strips, injoint of terrazzo cement floor (40mm wide and 6mm thick)

Filling available exacavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and waterign lead upto 50m and lift upto 1.5m.

Providing and fixing 1st quality ceramic glnzed titles conforming to IS: 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all color, shades except begundy, bottle green, black of any size as approved by Engineer in-charge in skirting, risers of steps and dados Over 12 mm thick bed of cement Mortar1:3(1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pinting in white cement mixed with pigment of matching shad complete.

Providing and fixing Ceramic glazed floor tiles mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS; 13755 of NITC.O, ORIENT, SOMANY, KAJARIA, or equivalent make in color such as white,Ivory, Grey, Fume Red, Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 cement: 4 coarse sand including pinting the joints with white cement and mathcing pigment etc. complete.

Providing and fixing white vitreous China water closet (Indian type) with seat and squatting pan vitreous China flushing cistem and CP flush with fittings, C.I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required, Orrisa pattern white vitreous China W.C pan of size 580mm.

Providing and fixing kitchen sink with C.I brackets, C.F. brass chain with rubber plug, 40mm C.P brass waste complete, including painting the fitting and brackets, cutting and making good the walls wherever required.

Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets.

Providing and fixing bib cock of approved quality, 20mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved make conforming IS: 8931, 15mm nominal bore.

Providing and fixing C.P brass close hole basin mixer pillar tap of approved quality and make, weithing not less than 1.970 kg. 15mm nominal bore of standard back type

Providing and fixing C.P brass shower rose with 15or 20mm inlet 100mm dia.

Providing and fixing C.P brass shower controller

Providing and fising ball valve (brass) of approved quality complete 20mm nominal size

Providng and fising un-plasticized PVC connection pipe with brass unions 45cm length 20mm nominal bore

Providing and fising of jet spray/health faucet of premium quality

Providing and fixing 3-layer PP-R (Poly propylene Random Copolymer) pipes SOR 7.4 UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold-water Supply including all PP-R plain and brass threaded

Polypropylene randon fittings I/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. Pn-16pipe, 25mm OD(internal) = 30mtr

Pn-16 pipe, 40mm OD (external) = 20 mtr

Providing and fixing 40mm diameter with length not less than 700mm waste pipe for sink and wash basin

Providing and fixing C.P brass toilet paper holder of approved qulity with ISI mark = 1 nos 600mm long Towel rail with total length of 645 width , 78mm wide and cff, Height of 88m weighing not less than 190gms of ISI marked = 1 nos each.

Providing and fixing soap dish of C.P brass of standard shape with bracket of the same material with soap fittings of approved quality color and make weight not less than 105gms average or equivalent.

Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board with CP brass screws.

Providing and fixing PVC waste pipe of regd. Diameter with bends, tee bends, L head and P trap with adding material ISI marked like Prince, Supreme or equivalent and complete job. 75mm dia. = 15 mtr

110mm dia. = 10 mtr

Structural steel work welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and the base support for tank ( Sintex, Elastoplast, star, lotus or equivalent having valid ISI license

Cost of one water lifting pump with 0.75 Hp power motor of approved quality etc.

A) Lighting point including wiring for lighting points in 1.5sq.mm copper wire and 2.5 sq.mm PVC insulated multi-strand copper wire for lighting sub-mains.6Amp one way switch, 2mm thick PVC conduit/channel with bends, junction boxes etc. complete job.

B) Heating point including wiring for heating points in 2.5sq.mm copper wire and 4.0sq.mm PVC insulated multi-strand copper wire for heating sub mains, 16Amp switch socket combined, 2mm thick PVC conduit/channel with bands, junction boxes etc. complete job.

Providing and fixing of insulation for bath pipe and Sintex I,e first layer of glass wool, binded with wire mesh,k-flex, electrical heat tape and cover with aluminum sheet of all complete job. 1) PPR+PVC

2) Sintex 500 liters

Cost and fitting of solar heating tube for 200.00 litres of standard or approved quality including accessories,stand and complete work.

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS: 3087 marked to frame, backing or studding with screws etc. complete job.

Providing and fixing of plain tongued and grooved including plugs complete with necessary screws and priming coats on unexposed surface for ceiling complete job.

Polishing on wood work with readymade wax polish of approved brand and manufacture on new work.

Providing and fixing of insulation for room carpet of required size and thickness of approved quality.

Providing and fixing of premium curtains and its accessories including rod required size and thickness of approved quality.

Providing and laying DPC 50mm thick with cement concrete 1:2:4(1 cement: 2 Coarse sand: 4 graded stone aggregate 12.5mm nominal size) Nallah

Cost and installation of one complete entrance gate with ornamental grilled including signage board. (12.00x6.00)with complete work.

Cement and steel Avg.(Lead 5km)

Sand/stone agg.Avg. (Lead 20km)

Stone Avg. (Lead 30.0km)

Carriage of materials from source to site of work by MT. including loading, unloading of complete job.

M/S RINCHEN NAMGYAL

M/S SKARMA JIGMET

M/S JIGMET RINCHEN GOVT CONTRACTOR