Provision of lighting arrangement with 4 metre decorative poles at Chardham Park in Ward No. 203, AC-58 (Laxmi Nagar) under East Zone.

PART A: Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/cable as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Supplying and laying of following size DWC HDPE pipe lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*10 sqmm

Supplying, Installation, Testing and Commissioning of architectural column light pole made of mild steel with overall height of not less than 4 mtr. Duly finished with four coats of protection coating viz. etch primer, epoxy primers, poly urethane and glass clear respectively (each coating should not be having an average thickness of 65 micron). Light column in square cross section 220 mm × 220 mm made of mild steel housing components in square cross section having minimum weight 120 kg. Including a laser profile jali pattern (~2.4 m ht of MS laser cut sheet), cladded with opal acrylic diffuser, 4 × 36 Watt LED source and additional 4 Nos. 25 W LED each post-top head, black in colour, coated for high corrosion resistance, silicone gasket, SS fasteners, foundation bolt of size 20 mm × 600 mm (N.S.) – 04 Nos. & foundation base plate of size (N.S.) 325 mm × 325 mm x 12 mm (L × W × H) – 01 No. and integral driver, IP65, IK>07 for the complete light fixture including non-metallic portion; and installation accessories. 360° LED light distribution in the column part provided and low glare indirect line of vision. Efficacy >85%, THD <10%, PF >0.9, Surge protection >4KV, CCT 3000K, CRI >70, SDCM <4 & IK >07. Life of LED – 50,000 burning hours, suitable size of service window having pre wire earth connection. Integral junction chamber for cable termination including providing and fixing 4-way 32 Amp heavy duty connector – 3 Nos. and 1 No. 6 Amp SPMCB, 10KA “C” curve including making connections, testing on load complete etc. as required.