Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.0 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹9.9 L+₹85,499 (9.47%)Rejected-Finance C 234 ADG P CHENNAI | L2 | Rejected-Finance Being Not Lowest Tenderer | |
| 3 | L3₹10.9 L+₹1.9 L (20.6%)Rejected-Finance 20 1 CHANDRA NIVAS APPLEBY ROAD WELLINGTON COONOOR NILGIRIS 643 232 | COONOOR | NILGIRIS | TAMIL NADU | 643232 | L3 | Rejected-Finance Being Not Lowest Tenderer |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
7 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Wellington
Garrison Engineer Wellington Barrack Post Nilgiris Pin code-643231
MAINTENANCE OF OFFICE ACCN OF PAO ORS MRC WELLINGTON AND MAINTENANCE OF RESIDENTIAL ACCN OF DAD AT WELLINGTON UNDER GE WELLINGTON
2022_MES_568410_1
8761/E8
Open Tender
Civil Works
Item Rate
180 days
Wellington
As per Tender Documents
4 documents required · 4 mandatory
₹500
GE Wellington
₹20,000
Yes
10 Apr 2023
10 Dec 2022
14 Jan 2023
11 Dec 2022
7 Jan 2023
24 Dec 2022
Amount
Taking down PVC chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.
Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.
Taking down Shutters of any description exceeding. 1 sqm and not exceeding 2 sqm all as specified and directed.
Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube,supplying and fixing in opening as per specification and drawing all as specified and directed.
Factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as specified and directed.
2nd class hard wood wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.
30mm thick glazed and skeleton, shutter, divided into squares to receive glass, gauze (with sash bar) with plain chamfered or rounded, mitred and rebated sah bars, any numbers the size of member of shutter as specified in SSR Pt-I section 8 clause 8.24 (b) window and ventilaters shutters using second class hard wood and fitted to chowkat all as specified and as directed.
35mm thick second class hardwood glazed and skeleton door shutters open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.
35mm thick second class Hard wood made plain, framed, panelled shutters (any No of panels) with veneered particle board medium density, 12mm thick complete all as specified and directed.
35 mm thick flush shutter,solid core construction, with block Board Core and plywood face panels covered with decorative Face Veneer with lipping/ frame on one faces, complete all as specified and as directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.
Mild steel hold fast conforming to Fe-290 Gde-165 all as specified and directed.
Tarring back of chowkat, area tarred exceeding 0.10 sqm but not exceeding 0.5 sqm each all as specified and as directed.
All as per item No.13 hereinbefore but treating small articles such as hold fast etc tarred area not exceeding 0.10 sqm each all as specified and as directed.
PCC type C1, 1:3:6 using 20mm graded stone aggregate over platform, bed blocks for hold fast, and like of any description, over 10mm in width or grith not otherwise described all as specified and directed.
Butt hinges, 100 mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
Butt hinges, 100 mm size medium weight, cold rolled mild steel, and fixed in repairs complete all as specified and directed.
250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section 150 mm long for door / window all as specified and directed.
Aluminium handles, cast type anodised, extruded section 100 mm long all as specified and directed.
Aluminium handles, cast type anodised, extruded section 150 mm long all as specified and directed.
Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple all as specified and directed.
Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple and fixed in repairs all as specified and directed.
4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane all as specified and directed.
Floor door stopper aluminium alloy body with rubber bush fixed with screws including fixed in repairs complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Dismantling of Wrought iron or Mild steel work of any description not otherwise provided for such as fencing posts, gates, etc complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.
Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle) including distance pieces, cleats etc.of grade Fe-410-W (Gde-E-250) quality-A all as specified and directed.
Preparation of new or untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.
Mild still screw bolts of 5 to 10 mm diameter of shank (machine made ) with hexagonal or squre heads at one end and screwed the other ,each screwed end to to be fitted with washers and one hexagonal or squre nut , exceeding 5 cm and not exceeding 10 cm long all as specified and directed.
Dismanting of Mangalore pattern roofing tiles with ceiling tiles or slate roofing complete all as specified and directed.
Roof Tiles Mangalore pattern interlocking at side, joints laid dry complete all as specified and directed.
Aluminium handles, cast type anodised, extruded section 150 mm long including fixed in repairs all as specified and directed.
Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads and supply and fix sheet glass 3mm thick ordinary quality and glazing with oil putty and beads in square not exceeding 0.5 sqm in each pane all as specified and as directed
Fancy type decorative drapray rod 20 mm dia including side caps and brackets, as in repairs complete all as specified and directed.
Resecuring or easying and adjusting without taking down shutter of any description not exceeding 1 sqm each all as specified and directed.
Resecuring or easying and adjusting without taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm each all as specified and directed.
Mortice lock with 4 lever vertical type size of 100mm with four levers of mild steel body fixed in repairs all as specified and directed.
Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.
Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base to floor 100mm thick all as specified and directed.
Machine Pressed precast concrete interlocking paver block rubberised any shape and size conforming to IS- 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement and pigment including 50mm thick sand bed complete all as specified and directed.
Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.
Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) light grade polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement slurry to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.
Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in skirting/, dadoo etc. set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over and including 10mm cement plaster as backing coat in cement mortar 1:4 complete all as specified and directed.
Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar 1:4 on fair face of brick or concrete surface
Coloured Non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.
PVC (SWR) 110mm dia bore soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including dismantling old drain pipe complete all as specified and as directed.
PVC (SWR) 110mm dia bore soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors including dismantling old drain pipe complete all as specified and as directed.
PVC (SWR) bends any radius, 110mm dia complete all as specified and as directed.
PVC (SWR) branch piece any radius 110 mm dia complete all as specified and as directed.
PVC (SWR) 75mm dia bore soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including dismantling old drain pipe complete all as specified and as directed.
PVC (SWR) bends any radius, 75mm dia complete all as specified and as directed.
40mm bore low density polythylene pipes (LDPE) of pressure rating 6 Kgf/cm² fixed complete to walls or in ceilings or in floors including dismantling old drain pipes complete all as specified and as directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed.
Rendering 15mm thick over concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement on stone wall /PCC Block / Brick work and above chajjas all as specified and as directed.
Preparing surfaces, plastered or unplastered on new wall surface and applying three coats of white wash on new wall surface complete all as specified and directed.
Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work / concrete surfaces, finished even and smooth without using extra cement compete all as specified and directed
Preparation of new plastered or unplastered surface of walls and applying two coats of oil bound distemper washable over a coat of primer complete all as specified and directed.
Complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper washable over a coat of primer including preparation of surfaces to a true even and smooth complete all as specified and directed.
Vitreous china squatting pan Orrissa pattern size 580mmx 440mm white with integral foot rest with 'p' or 's'trap including flush pipe PVC 32 mm dia, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc, and making good to floors, fixed in repairs, complete all as specified and directed.
Vitreous china wash down water closet pan (pedestal pattern) white with P or S trap incl flushing pipe , seat and PVC seat cover (white) closed pattern with flat bottom & cover brass chromium plated hinging device, incl connection to drain and to flushing pipe, antisyhonage pipe etc and including fixed in repairs complete all as specified and directed.
PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket fixed in repairs complete all as specified and directed.
Vitreous chian wash basin, white, flat back, size 550mm x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling / fittings 32mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32mm bore and of suitable length, 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.
Cleaning and removing all scales and dirt, etc. from tanks and from mouth of circulating pipes, etc. of water tank exceeding 250 ltrs and not exceeding 500 ltrs capacity complete all as specified and directed.
Powder coated Anodised Aluminium frame for doors windows, ventilators, U channels, safety grill with one or more rebats including jointing cleat for fixing, complete all as specified and directed
12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination, and other side balancing white lamination fixed with screws to timber frame work all as specified and directed.
Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, fixed in repairs complete all as specified and directed.
GMS Builders
P K ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .