Loading
Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2 L
Closing Date
1 Aug 2026, 4:00 pm7d left
Rural Drinking Water and Sanitation Department
H N MANJUNATHA
9880069894
Providing FHTCs to 331 households of Adigondanahalli Habitation in Adigondanahalli village in Neralur Grama Panchayat in Anekal Taluk, Bangalore Urban District through SVS.
RWSSD/2023-24/WS/WORK_INDENT5903/CALL-6
RWSSD/2023-24/WS/WORK_INDENT5903/CALL-6
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
RWSSD Division Office Bengaluru Urban
8 documents required · 4 mandatory · 4 optional
3.2 b)To qualify for award of this contract each Tenderer in its name should have in the last five years (2021-2022 to 2025-2026) satisfactorily completed at least Similar drinking Water supply project of value not less than Rs. 62.78 lakhs (50 percent of the estimated cost of amount put to tender) Note Successful completion certificate shall be submitted which through to be issued by an officer not below the rank of Executive Engineer
3.2 c) To qualify for award of this contract, each Tenderer in its name should have in the last five years (2021-2022 to 2025-2026) Executed in any one Finacial Year,the minimum Four quantities of work (Usually 80 Percent of the peak annual rate of construction) 1. Earth work in all sort of soils 4584.12 Cum 2. Cement Concrete 521.37 Cum 3Providing and laying Pipeline 13791.25 Rmtr
PWD LICENCE COPY MUST UPLOAD
3.2 a. To qualify for award of this contract each Tenderer in its name should have in the last five years 2021-2022 to 2025-2026 Achieved in at least two financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs. 251.12 Lakhs.usually not less than two times the estimated annual payments under this contract The certificate should be affixed with the seal of the office of the Chartered Accountant with UDIN Number. a. Income Tax Returns Filed b. Audited statement c. Profit & Loss Statementd. Balance Sheet certified by the ICAI registered Chartered Accountant must be submitted for the relevant years along with compulsory UDIN Id No.Note: Annual turnover for the past five relevant financial years should be certified by an ICAI registered Chartered Accountant. The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number legible
3.3 (b) liquid assets and /or availability of credit facilities of not less than Rs 37.67 lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc (usually 30 Percent of the estimated cost of amount put to tender) & and shall submit the certificate) in the prescribed format only issued by Nationalised/Scheduled Bank for the particular work.As Per ANNEXURE-III
3.6Tenderer who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than total tender value. The available tender capacity will be calculated asunder. Assessed available tender capacity - AXNX1.5-B Where A-Maximum value of works executed in any one year during the last five years updated to current year price level taking into account the completed as well as works in progress N -Value for assessment year B - Value, at current year price level, of existing commitments and on going works to be completed in 15months
The Bidder Should Declare Clearely wheather the bidder has not been black listed/banned/debarred by any Central/ State/UT Government Department or Undertaking/Organization should be furnished
The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be counter signed by the Engineer in charge, not below the rank of Executive Engineer or equivalent
The Copy of the PAN card with GSTIN Registration Certificate
CONTACT INFORMATION (i e Mobile No & E-mail ID) of the Contractor should be furnished
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
₹3,140
₹2 L
1 Aug 2026
24 Jul 2026
4 Aug 2026
23 Jul 2026
23 Jul 2026
22 Jul 2026
Providing FHTCs to 331 households of Adigondanahalli Habitation in Adigondanahalli village in Neralur Grama Panchayat in Anekal Taluk, Bangalore Urban District through SVS.
Distribution Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for a Cutting Cement Concre...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for:Cutting in Asphalt Road Surface to ...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unservice- able material to the appropriate disposal area as per direction of ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Supplying of 63 MM Electro Fusion Coupler
Supplying of 75 MM Electro Fusion Coupler
Supplying of 90 MM Electro Fusion Coupler
Supplying of 63 MM Electro Fusion Tee
Supplying of 75 MM Electro Fusion Tee
Supplying of 90 MM Electro Fusion Tee
Supplying of -63MM Electro fusion Elbow
Supplying of -75MM Electro fusion Elbow
Supplying of -90MM Electro fusion Elbow
Supplying of - 90 x 75mm dia Electro fusion Reducer
Supplying of - 90 x 63mm dia dia Electro fusion Reducer
Supplying of - 75 x 63mm dia dia Electro fusion Reducer
Supplying of Electro fusion End Cap with Pipe of 0.2 m length
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Providing 80 mm dia Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any For Air Valves of 80mm dia.
Supply and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, design ...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer)
pipes confirming to IS.15801, with WRAS and NSF certificates with UV stabilized and anti-microbial fusion welded, having thermal sta...
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer)
pipes confirming to IS.15801, with WRAS and NSF certificates with UV stabilized and anti-microbial fusion welded, having thermal sta...
Providing & fixing Make Electro Fusion Saddle Comply with BS EN 12201- 3-2011 PN - 12.5 rating and food grade raw material per BS 6920 with material of construction PE 80 or PE 100 and color of fit...
Flow control Valve 5LPM/10LPM/15LPM: Providing, & fixing Flow Control Valve using food grade materials SS 316 ball /1/2" [15mm including cost of all materials, labour charges HOM & Testing complete as...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm ...
Supply of PPR Female Threaded Coupling confirming to IS 15801-2008 and DIN Standards 8077/8092 20* 1/2 dia
Supply of PPR Female Threaded Coupling confirming to IS 15801-2008 and DIN Standards 8077/8092 20* 1/2 dia
Supply of PPR End Cap confirming to IS 15801-2008 and DIN Standards 8077/8092
Supply of PPR Union confirming to IS 15801-2008 and DIN Standards 8077/8092
Supply of PPR Ball Valve confirming to IS 15801-2008 and DIN Standards 8077/8092
Providing and fixing brass bib cock of approved quality
Supply and fixing of RCC demarcation stones of 30cms x 15cms and 90cms using 1:2:4 CC and 6mm dia rods for verticals and stirrups and rendered smooth, including engraving letters letters "KWB and ARRO...
Supplying at site pot rest slab of 0.45mx0.30mx0.20m in CC. 1:2:4 proportion with granite metal 20 mm and down size including plank centering and fom work, machine mixing, tamping including plastering...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works in all kinds of soils , as per drawing and techni...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cut- ting, bending, placing in position, binding and anchoring to adjac...
Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited ...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments -80mm dia
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregat...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine agg...
Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine aggre...
Supply Thermo-Mechanically Treated bars of grade Fe-500D (2nd Quarter Revision of Rates for steel related items W.E.F. 07/07/2022)
Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, traightening, bending, ...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I toXXII) 1978 with latest amendments if any cost of all materials, labour charges etc.complete.
Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All
Double Socket Duck Foot DI Bends: (80X900)
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...
Providing and fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle
iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre belo...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
• MINI Chlorinator 80gms/Batch Production capacity : 10gms/hr Total time per Batch : 8Hrs. Total volume of chlorine generation : 80 gms/ batch. Salt Required per hr. : 400 gms/batch. Electrical powe...
Chlorinator 200gms/Batch Production capacity : 25 gms/hr Total time per Batch : 8Hrs. Total volume of chlorine generation : 200gms/batch. Salt Required per hr. : 800gms/batch. Electrical power require...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Brick masonary with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :One coat with paint of approved quality to give ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender Notification 2026-27 05 new.pdf
Others - Tender Notification • 0.03 MB
General condition Scan copy.pdf
Others - General condition • 0.60 MB
Adigandanahallii.docx
Tender Document • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].