Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAccepted-AOC DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L1 | Accepted-AOC AOC | |
| 2 | L2₹36.7 L+₹1.3 L (3.78%)Rejected-Finance 3 100 2 KOTIAN CO NH66 KULAI POST SURATHKAL MANGALORE DAKSHINA KANNADA KARNATAKA 575019 | DAKSHINA KANNADA | KARNATAKA | 575019 | L2 | Rejected-Finance BEING NOT L1 | |
| 3 | L3₹36.8 L+₹1.5 L (4.23%)Rejected-Finance PMC 24 528 GROUND FLOOR NEAR PAYYANUR SERVICE CO OP BANK KOTTY BRANCH PAYANNUR KANNUR KERALA 670307 | PAYYANUR | KANNUR | KERALA | 670307 | L3 | Rejected-Finance BEING NOT L1 | |
| 4 | L4₹38.3 L+₹3.0 L (8.48%)Rejected-Finance | L4 | Rejected-Finance BEING NOT L1 | |
| 5 | L5₹39.6 L+₹4.3 L (12.3%)Rejected-Finance | L5 | Rejected-Finance BEING NOT L1 |
Tender Value
₹40.8 L
EMD Value
₹81,600
Closing Date
29 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (I) (CG) Goa
Garrison Engineer (I) (CG) Goa HQ Coast Guard DHQ-11 Chicolna PO- Bogmalo Goa 403806
ADDITION ALTERATION TO BUILDING NO. P-9 AT CGRA KUNJATHBAIL MANGALORE UNDER GE(I)(CG) GOA
2024_MES_639759_1
8440/GOA/E8
Open Tender
Miscellaneous Works
Item Rate
210 days
BLDG NO P 9 CGRA KUNJATHBAIL MANGALORE
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (I) (CG) Goa
₹81,600
Yes
12 Jun 2024
30 Jan 2024
7 Mar 2024
30 Jan 2024
29 Feb 2024
14 Feb 2024
30 Jan 2024 - 6 Feb 2024
Amount
SCH A PART-I [ BLDG PART] Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M & L Light shade Virified Ceramic tiles light shade 10mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm screed bed 1:4 complete all as specified and directed.
All as per Item No 2.00 here-in-before but as in skirting over 10mm thick rendering in Cement mortar (1:4) complete all as specified and directed.
M & L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm screed bed 1:4 complete all as specified and directed.
M & L 25mm thick cement concrete type B-O (using 12.50mm graded crushed stone aggregate) as in floors finished rough to receive floor finishes complete all as specified and directed.
M & L Glazed Ceramic tiles in vertical surface 350mm x 250mm x7mm / 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick backing plaster in cement mortar 1:4 complete all as specified and directed.
M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M & L Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.
Taking down chowkats or frames n exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frames) complete all as specified and directed.
Taking down and re-fixing of shutters in same opening but exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed.
S & F 2nd Class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S & F 2nd Class hard wood, 35mm thick factory made door shutters plain framed, panelled shutter with lock rail and panel of 12mm thick veneered water proof particle board with commercial veneering on both faces the size of rails and stile as per IS -1003 kiln seasoned and chemically pressure treated complete all as specified and directed.
S & F for Glazed and skelton shutters 30mm thick 2nd class hard wood, open rebated and prepared to receive glass, guage etc, (with sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed.
M & L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M & L Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S & F Factory made PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour, PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F Factory made Solid PVC Moulded Door Shutters 28 to 30mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
M & L Cement mortor 1:6 Forming jambs etc to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.
S & F 75mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.
S & F in repair 100mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S & F 100mm Long cast type Aluminium handles, anodised complete all as specified and directed.
M & L 150mm size aluminium handle (ISI Marked) cast type anodized, fixed complete all as specified and directed.
S & F 100mm size Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F Floor door stopper of brass body and tongue with hard drawn steel spring overall length of cover plate 150mm and fixed complete all as specified and directed
S & F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed
S & F Mortice latch with two levers (vertical type), brass body and fixed length of latch 100mm complete all as specified and directed
S & F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
S & F Powder coated anodised aluminium frame for windows, ventilator with one or more rebates including joining cleat for fixing etc. minimum thickness of powder coating 50 micron complete all as specified and directed
S & F Powder coating of any colour, thickness or powder coating not less than 50 micron Anodised aluminium window and ventilator shutters, three track sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed
M & L Providing & fixing of Aluminium composite panel of approved make and colour for wall cladding for straight Brick/Rcc/stone walls & columns/beams with necessary Aluminium frame works at required level made out of 50 x 25 x 3mm 'C' section equivalent. The panel should consist of 3mm thermoplastic core of antitoxic LDPE sandwiched between 0.5 skins thick Aluminium sheet making a total panel thickness of 4 mm. The surfaces will be finished with PVDF based coating on top sides and service coating on reverse sides would be in polyster paint. The system shall be fixed using GI brackets, Aluminium 'L' cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done using silicon weather proofing sealant with necessary rods etc., complete with all lead & lift, as per manufacturers specifications complete all as specified and directed.
S & F 4mm thick Ordinary glass, and glazing with glazing clips to Al frame, exc 0.5 Sqm in each pane complete all as specified and directed.
S & F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of apeture 1.40mm and fixed with aluminium wire stapples complete all as specified and directed
S & F in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of apeture 1.40mm and fixed with aluminium wire stapples complete all as specified and directed
S & F Aluminium anodised DECO Grill 10mm thick DG 104 fixed with necessary H/F/H channel etc complete all as specified and directed. [Note : Deco grill fixed with windows with all fittings as directed by Engr-in-Charge]
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
M & L Providing and fixing Stainless steel (Grade 304) railing made of hollow tubes, channels, plates, brackets etc. including welding, grinding,buffing, polishing and making curvature (where everrequired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
Removing plant/ weeds from the roof tops/pipe lines and applying deweeding chemicals, removing rubbish off the premises complete all as specified and directed.
M & L Preparing cracked surface of concrete and applying any approved crake filler complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connections setting aside serviceable pipe for reuse and removing unserviceable pipe from site complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connections setting aside serviceable pipe for reuse and removing unserviceable pipe from site complete all as specified and directed.
Taking up or down 25-32mm dia steel tubing and connections setting aside serviceable pipe for reuse and removing unserviceable pipe from site complete all as specified and directed.
Supplying and laying of 16mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.
Supplying and laying of 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.
Supplying and laying of 32mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.
S & F Looking mirror of size 600mm x 450mm, 5mm thick bevelled edge mounted on 6mm thick plywood including fixing with screws and cup washers complete all as specified and directed.
S & F Cabinet mirror with all fittings and accesseries complete all as specified and directed.
S & F in repairs brass chromium plated shower rose 125mm dia with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.
S & F in repairs Pillar taps fancy type 15mm bore cast copper alloy, with capstain heads, chromium platedscrewed down high pressure, with or without lettered "Hot" of "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S & F in repairs for Bib taps fancy type, Chromium plated for iron pipe and fixed 15mm bore complete all as specified and directed.
S & F in repairs Stop valves cast copper alloy 15mm dia, fancy type, chromium plated, screwed down, high pressure, with crutch handle screwed both ends for iron pipe or for unions complete all as specified and directed.
All as per Item 53.00 above, but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed.
S & F PVC Connection 15 mm size with PTMT nuts of lengths 450 mm, complete all as specified and directed.
S & F in repairs Health faucet Chromium plated (hand shower type) with shut off valve (thumb or fush button type) to allow controlled and continuous flow of water with flexible polythene pipe of adequate length and with wall mounted pedestal for hanging faucet including taking down of old one complete all as specified and directed.
S & F in repairs PVC flexible waste pipe 32/40mm dia for basin/kitchen sink complete all as specified and directed.
S & F in repairs Chromium plated Soap dish size 160mm x 160mm x 90mm fixed to plugs with CP brass screws complete all as specified and directed.
S & F in repairs vitreous china wash basin, white, flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and 32mm dia waste pipe complete all as specified and directed.
S & F in repairs PVC valveless, Syphonic action type, flushing cistern 10ltrs capacity, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe, complete all as specified and directed..
S & F in repairs, Vitreous China wash down water closet pan (pedestal pattern), white , including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover, mild steel chromium plated hinging device complete but excluding flushing cistern including making good damaged/disturbed surfaces complete all as specified and directed.
S & F in repairs 32mm dia bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.
S & F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S & F 15mm dia Brass continental angle cock chrome finish complete all as specified and directed.
S & F Glass corner shelf for wall mount for bathroom complete all as specified and directed.
S & F Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) complete all as specified and directed.
S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S & F Stainless steel towel stand for bathroom complete all as specified and directed.
S & F Grating Square (SLIT) 150mm of PTMT (Minimum weight 100 gms) complete all as specified and directed.
S & F in repairs toilet paper holder of Stainless steel of size 10.5cm x 9cm fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
S & F 100mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S & F in repairs 32mm dia Harrison rails, Stainless steel fancy type with fixing brackets, stops, rollers etc complete all as specified and directed.
S & F in repairs 20mm dia float valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.
M & L Cleaning and removing all scale and dirt, etc, from tanks capacity exc 500 ltr & n.exc 1000 ltr and from mouths of circulating pipes, etc complete all as specified and directed.
S & F Gunmetal globe or gate valve 25mm dia iron wheel head screwed both ends for PVC pipes including taking out old one complete all as specified and directed..
S & F Gunmetal globe or gate valve 20mm dia iron wheel head screwed both ends for PVC pipes including taking out old one complete all as specified and directed..
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) including taking out old one complete all as specified and directed..
S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends including jointing with solvent cement, complete all as specified and directed.
S & F PVC (SWR) pipes 75mm dia single socketed in any length, with rubber rings, laid in floor or trenches complete all as specified and directed.
S & F PVC (SWR) bends 75mm dia including jointing with solvent cement, complete all as specified and directed.
S & F 75mm dia PVC Nahani Trap 75mm (SWR) floor trap, plain with grating including jointing with solvent or cement complete all as specified and directed.
M & L Preperation of old treated external surfaces of walls etc by washing, rubbing down and stopping of painted surfaces and applying one coat of weather proof exterior emulsion grade (anti fungal paint) paint premium quality complete all as specified and directed.
M & L Preparing old surface of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying one coat of Plastic emulsion paint on wall complete all as specified and directed.
M & L Preparing old surface of ceiling by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying one coat of white wash complete all as specified and directed.
M & L Preparing old treated wooden surface of any description over 10cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.
M & L Preparing old treated steel surface of any description over 10cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410-W (Gde E-250 quality-A) complete all as specified and directed.
S & F Fe 410W (Gde E-250) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, clests etc complete all as specified and directed.
S & F Fe 410W (Gde E-250) quality A for 6mm thick Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment to bottom of GI pipe conforming to Fe-410W complete all as specified and as directed
M & L Two coats of Synthetic enamel paint over a coat of zinc chrome red oxide on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete all as specified and as directed
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed
S & F for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed
S & F for Pre painted galvalume aluminium zinc coating Gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed
S & F Aluminium Snap grid size 605mm x 605mm false ceiling frame work of angle 25mm x 25mm x 2mm. Main TEE 38mm x 25mm x1.5mm and cross TEE 25mm x 25mm x1.4mm and size of grid 605mm x605mm complete all as specified and directed.
Providing and fixing 12mm thick perforated Gypsum Board 600mm x 600mm size in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed
S & F Hangers 6mm dia GI (upto 1200 mm length)adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.50mm dia, 40mm long complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M & L 75mm thick Plain cement concrete 1:3:6 Mix type C2 as in plinth protection and in path surface to be finished without using extra cement complete all as specified and directed.
M & L Providing Plain cement concrete type B1-1:2:4 (using 20mm graded stone aggregate) in height, coping, kneelers, apex stones, bed plates, including weathering, slightly, rounded or chamfered angles and throating complete all as specified and as directed
S & F in repairs for long body Bib taps fancy type, Chromium plated for iron pipe and fixed 15mm bore complete all as specified and as directed
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M & L Rendering 15mm thick in Cement mortar 1:4 on finished with water proofing compound @ 3% by weight of cement finish the surfaces even and fair complete all as specified and directed
M & L Rendering 15 mm thick internal cement plaster in Cement mortar 1:6 on fair faces of stone masonry surfaces is to be finished even smooth with out using extra cement complete all as specified and directed
Supply only Integral waterproofing compound complete all as specified and directed
M & L Preparing new plastered surfaces of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying two coat of Oil emulsion distemper complete all as specified and directed
M & L Preparation of finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Sqm over a coat of exterior primer applied @ 2.20 kg/10 Sqm complete all as specified and directed
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
M & L Pre-cast cement concrete block masonry type C1 1:3:6 (using 20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed
S & F Stainless steel telescopic Channel Drawers Slides complete all as specified and directed
S & F Stainless steel auto hinges for kitchen cupboard shutter complete all as specified and directed
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed
SCH A PART-II [ WALL, GATE AND FENCING] Dismantling concrete poles/ struts, any size complete all as specified and directed
Dismantling expanded metal n. exc 4 kg, any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified and directed
Excavating in trenches for hard/dense soil exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed
M & L for Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in fdn /mass concrete for wall and post struts complete all as specified and directed
Returing filling including spreading levelling watering in layers n.exc 25 cm complete all as specified and directed
Removing excavated material (soil) to a distance exc 250 m and n.exc 500 m and deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and directed
M & L for dressed laterite stone masonry, well bonded, bedded and solidly hearted built in Cement mortar 1:6 complete all as specified and directed
M & L Rendering 15mm thick in Cement mortar 1:4 on fair faces of stone masonry finished even and smooth without using extra cement complete all as specified and directed
M & L Preparation of new plaster surfaces and applying two coats of cement based paint over a coat of exterior primer complete all as specified and directed
M & L Plain cement mortar 1:2:4 type B1 using 20mm graded stone aggregate including formwork for coping/haunching, weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed
M & L HDPE Pipes of 50mm dia of pressure rating 6Kgf/cm2 fixed to the retaining wall for weep holes complete all as specified and directed
M & L Framed work Fe-410-W(Gde E-250) quality B as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other overing, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed
M & L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 grade 165 quality A complete all as specified and directed
M & L Preparation of new steel surfaces of any description over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed
M & L Mild steel TMT bars 10mm dia & over cut to length ,bent to shape required including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M & L Mild steel TMT bars 5mm dia and over up to and including 10mm dia & over cut to length ,bent to shape required including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified andd as directed as in stirrups , spaces and binders complete all as specified and directed
M & L Reinforced cement concrete of M-30 design mix concrete using 20mm graded aggregate for coloumns, Pillars, Posts etc complete all as specified and directed
M & L Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions including for fair finished surfaces complete all as specified and directed
SCH A PART-III [ E/M PART] Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc complete all as specified and directed
M & L Point wiring complete with 1.5 Sqmm single core PVC insulted FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including cover plate and metal flush box as suitable module and including suitable size PVC rigid non metallic PVC conduit with all accessories concealed in walls and including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor complete all as specified and directed :-
(a) One light/ fan point controlled by one, one way switch complete all as specified and directed
(b) One light point controlled by one, Two way switch complete all as specified and directed
(c) One switch socket outlet 5 A on same board with other switch complete all as specified and directed
(d) One switch socket outlet 5 A independent with cable 1.5 Sqmm complete all as specified and directed
All as per item No. 133.00 described here-in-before but with copper conductor cable FRLS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board complete all as specified and directed
M & L Sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including suitable size PVC rigid non metallic PVC conduit with all accessories concealed in walls including taking down old unserviceable one complete all as specified and directed. [NOTE:- Two runs of 4 Sqmm + one run of 4 Sq mm and one run of PVC conduit and its accessories of suitable size shall be measured as one unit length].
All as per item No. 135.00 described here-in-before but with copper conductor cable FRLS 10 Sqmm complete all as specified and directed
S & F Switch Modular 6A one way, 1 module complete all as specified and directed.
S & F Switch Modular 16A one way, 1 module complete all as specified and directed.
S & F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.
S & F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.
S & F Modular switch 2 way 6A, 1 module complete all as specified and directed.
S & F Modular Bell push 6A 1 module complete all as specified and directed.
S & F Modular Fan step regulator, 120W - 2 module complete all as specified and directed.
S & F Bell, AC, 230 Volts, single pole complete all as specified and directed.
S & F Ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed.
S & F Sheet metal enclosure SPN with two pin and earth plug and socket complete with one single pole MCB 20 Amps capacity complete all as specified and directed
S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
S & F LED lights fitting 20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed
S & F Round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
S & F LED light fitting 10 Watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
S & F Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base including 9 wat LED bulb complete all as specified and directed.
S & F in repairs LED Bldg Security light fitting 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with IP 65/66 protection complete including GI bracket of suitable size bent to shape and fixed on wall with metal fastners 2 Nos incl drilling of holes as reqd and connecting up with flexible copper cable from ceiling rose to the light fitting complete all as specified and directed.
S & F in replacement LED post top lantern 20 Watt 230 Watt volts AC outdoor type with decorativepost top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
S & F replacement LED post top 45 watt with decorative circular design compliant to dark sky norms with polycarbonate opal diffuser outdoor type, IP 65 protection with impact and corrosion resistant complete all as specified and directed.
S & F in replacement LED bollard 9W, rectangular shaped with opal acrylic diffuser and IP 65 protection complete all as specified and directed.
S & F in replacement LED Globe milky white in colour outdoor light of size 8/12 inch polycarbonate with B-22 base including LED 9 Watt bulb complete all as specified and directed.
M & L for laying 3 core 4 Sqmm PVC insulated and PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volts, through PVC Conduit of suitable size including taking down the defective cable complete all as specified and directed.
S & F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. minimum air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old unserviceable ceiling fan and deposited to MES store complete all as specified and directed.
S & F Exhaust fan, metalic body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.
S & F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.
S & F MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with 200 Amps rated bus bar and neutral etc. and fixing MCBs of various rating capacity including taking down old unserviceable MCB DBs complete all as specified and directed.
S & F MCB Distribution board double door type SPN 12 way, sheet steel, powder painted, with 200 Amps rated bus bar etc. and fixing MCBs of various rating capacity including taking down old unserviceable MCB DBs complete all as specified and directed.
S & F MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with 200 Amps rated bus bar etc. and fixing MCBs of various rating capacity including taking down old unserviceable MCB DBs complete all as specified and directed.
S & F MCB Distribution board single door type SPN 2 way, sheet steel, powder painted for fixing MCBs of various rating capacity including taking down old unserviceable MCB DBs complete all as specified and directed.
M & L MCB TPN 100 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series including taking down old unserviceable MCB complete all as specified and directed.
M & L MCB SPN 40-60 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series including taking down old unserviceable MCB complete all as specified and directed.
M & L MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series including taking down old unserviceable MCB complete all as specified and directed.
M & L MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series including taking down old unserviceable MCB complete all as specified and directed.
Supply, lay, testing and commissioning UG cable XLPE insulated 25 Sqmm 4 Core, armored heavy duty electric cable, 1100 volts grade with stranded aluminium conductor in trenches including suitable size of double grip cable gland and joiinting etc complete all as specified and directed
Excavation in trenches not exc 1.5m in wide and not exc 1.5 m in depth and getting out in hard/dense soil for laying of cables complete all as specified and directed.
Returning, filling in, including spreading , levelling, watering and well ramming in layers not exc 25cm in soft / disintegrated rock complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.
Supply and lay riddled earth in trenches for cable protection, spreading, levelling, Punning and consolidating complete all as specified and directed.
Supply and lay old bricks sub class A for cable protection laid trenches complete all as specified and directed.
Supply and lay GI pipe medium grade 40mm dia as cable protection laid on trench/floor, fixed on pole/wall etc of following sizes complete all as specified and directed.
Supply and lay GI pipe medium grade 20mm dia as cable protection laid on trench/floor, fixed on pole/wall etc of following sizes complete all as specified and directed.
M & L Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.
KOTIAN -ECC
Gates Infra Construction Co
SIRI SALES AND SERVICES
KVL CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .