Repair and Renovation of Rajagopuram, Swamy, Amman and Uba Sannathies, Alangara Mandapam, Nandhi Mandapam, Madil Suvar and Reconstruction of South Side Thiru Sutru Mandapam, Relaying of Cutstone Flooring in Arulmigu Vaithiyanathaswamy Thirukovil

Providing scaffolding charges for Vimanam/Gopuram with steel posts non- flammable shade wherever necessary for main formwork and providing ladder arrangements, centering steel sheet for working inspection etc., complete as per standard specification. Hire charges for errection and maintenance and removing the same on completion of work upto various height

Providing water washing to existing cutstone masonry work for the removal of lime wash on stone and other deposits like soot and enamel paints.

Pointing the stone joints with lime mortar 1:1.5 (one of lime, one and five of sand) after rackingout the stone joints including erection of scaffolding charges etc complete.

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Removal of Damaged Plaster Surface In lime morter Including all Material and labour Charges etc.,

Providing vargapoochu over the core walls of vimanams/Gopurams, with lime mortar 1:1.5 complete including Shaping the mukhapathram, mahanasi, koodu all ornamental works to proper shape by embedding broken bricks of shaped/chiseled bricks , rough plastering with lime mortar 1:1.5 and finshing with final ornamental plastering nayam theervani including cost and conveyance of all materials, labour there fore lifting of materials, all working in heights curing with water etc complete including all extra for folding and including clearing from the vimanams/gopurams 100 sft superficial area for kalkaram.

Providing new sudhai vigrahams in the vimanams and rajagopurams with galvanized iron rod Reinforecement of suitable dia with binding wires wherever necessary, shapping the core with broken bricks set in cement mortar 1:3 finishing the same with cement mortar 1:3 bringing to the correct shape (lakshana) in conformist with silpa sastra inclusive of specials ornaments, weapons,peedam etc., complete and providing cement mortar nayam theervai wherever necessary inclusive of cost and conveyance of all materials, such as cement broken bricks, and GI rods binding wire all labour for working in heights curing lifting of materials etc.,complete including cement painting 2 coats over a primary coat(one vigraham is accountable with one head, 4 hands with weapons, ornamental costumees etc., as per prathima lakshans, vigraham height is measurable from the crown top to the bottom of foot only if peedam of foot only if peetam is provided the rate with peedam may be adopted as detailed hereunder)

New Sudhai 2'6" - 3'6"

Repair 2'6" - 3'6"

Painting with multicolour (panchavarnam) good emulsion paints complete for the vimanams/gopurams, including cost and conveyance of all materials, labours charges including artist painter, working in heights, lifting of materials,cost of brushes etc, complete which including all extra for foldings 100 sft

Vimanam ht15'

Vimanam ht 25'

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the cutstone slab in a single layer of required slope and finished by beating the lime concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Lime mortar 1:1.5 (One Lime, One and Half of Five Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Numbering and removing carefully the cutstone materials like uthiram, pavukkal and wall etc including all labour charges etc complete complying with standard specification

For wall

For Flooring

Refixing the cutstone materials like uthiram, pavukkal and wall etc including all labour charges etc complete complying with standard specification

For wall

For Flooring

Paving with cut stone flooring using cut stone of size600x600mm and 100mm thick and all the sides are machine cutting, top surface is neatly dressed and pointing with lime mortar 1:1.5 including all materials and labour charges.

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Plastering with lime mortar 1:1.5 (one of lime, one and half of sand ), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed water based emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Brick work in lime mortar 1:2 (one of lime, two of sand ) using country bricks of size 83/4" x 41/4" x 23/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc complete complying with standard specifiction.

Electrical Works

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe inexisting cable duct with PVC accessories with Module Plastic surface mounting box on wall with 6A one way module switch with module front plate for Open PVC Light point / fan point (for electronic regulator) 5 points / coils Higher End.DATA-1

Supply and fixing of 20 W 47af LED fitting with LED tube complete with TW round blocks on wall or ceiling with bulb with PVC unsheathed Copper leads from terminals to the fitting. SD-442

Supply and fixing of fancy glass shade and 15W LED BH point.(SD-80)

Supply and fixing of fancy glass shade and 7W / 9W LED bulb.(SD-79)

Supply and fixing of 50 W flood light with necessary wall grouting clamps with fixing bolts on ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end).DATA-4

Supply and fixing of 100W flood light with integrated driver with necessary wall grouting clamps with fixing bolts on ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end).DATA-5

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End (S D 376)

Supply and fixing of 2 nos.6A two module 3 pin socket , 2 nos. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End.(SD-382)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End ( SD 400)

Supply and fixing of 450mm 18" Air circulator with Pillar Clamp 1½ x ¼ MS flat with bolt and nuts for fixing the Fan on pillar with necessary connection.DATA-6

Supply and run of 35mm x 20mm,1.6 mm Thick Solid type cable tray with cover of 1.2mm Thick, with Tee's,bends, Joint plate arrangements complete on Existing Angle iron work on pillar /wall. DATA-7

Supply and run of 50mm x 25mm,1.6 mm Thick Solid type cable tray with cover of 1.2mm Thick, with Tee's,bends, Joint plate arrangements complete on Existing Angle iron work on pillar /wall.DATA-8

Supply and run of 50mm x 50mm,1.6 mm Thick Solid cable tray with cover of 1.2mm Thick, with Tee's,bends, Joint plate arrangements complete on Existing Angle iron work on pillar /wall. DATA-9

Supply and Fixing of (1 X 1/4 M.S Flat ) for Special type pillar Clamp and 1 x 1 x 3mm MS Plate for fixing the cable tray. DATA-10

Supply and run of 2 of 2.5 sq.mm (36/0.3) PVC insulated SC unsheated copper conductor of 110V grade in the existing duting with continous earth wire connection by 2.5 sq mm PVC insulated SC unsheated copper wire.DATA-11

Supply and run of 2 of 4 sq.mm (36/0.3) PVC insulated SC unsheated copper conductor of 110V grade in the existing duting with continous earth wire connection by 2.5 sq mm PVC insulated SC unsheated copper wire.DATA-12

Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps. ( SD 204 )

Supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.(SD-181)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 522 )

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB asoutgoing on wall with earth connection only. Higher End.(SD-529)

Supply and fixing of 6 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal door) with 1 no. 63A 4P MCB Isolator as incoming and 18 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End.DATA-13

Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-669)

Supply and clarnping of 3 1/2 x 35sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(SD-206)

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection (SD-165)

Supply and providing cable end termination of 3 1/2x35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.(SD-224)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .(SD 457)

Supply and clamping of 4 x10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(SD-203)(For Street Light)

Supply and laying of 4x10sq.mmPVCarmouredLTUGcable inatrench to be excavated at a depth of 0.75 metre putting 0.15metre layer of sandandcovering thecablecompletelywithbricksandsandand refilling theearthto make good(SD-180)

Supply and fixing of brass cable gland for 4 x 10 sq.mm. PVC LTUG armoured cable with earth connection.DATA-15

Supply and clamping of 2x10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(SD-199)

Supply and Laying of 2 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.DATA -16

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection.(SD-160)

Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.(SD-658)

Supply and fixing of TNEB powder coated meter box of 16 SWG suitable for 100A Three phase service connection with 3 nos. of 100A fuse unit (500V) 100 A neutral link, 100A TPN interior switch with HRC fuses and earth link (1" x 1/8" copper flat) on on wall with earth connection and inter connection with 19/16 PVC insulated copper wire from EB meter to fuse unit.DATA-17

Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40ADP MCB Isolator as incoming and 4 nos. 6A to 32A SP MCB a outgoing on wall with earth connection only. (Higher End) DATA-18

Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB Incomer ) with double door (metal door) with 1 no. 160 A 4 P MCCB switch as incoming and 4nos. 63A 3P MCB , 2 nos. 6A to 32A SP MCB as outgoing with suitable cable end box on wall with earth connection only. Higher End ( S D 609 )

Earthing as per the ISI specification standard with an earth electrode of 2mt class 'B' GI pipe of dia not less than 60mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD 221)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection ( S D 372 )

Sub total

Please Enable Macros to View BoQ information