Minor repair work for play equipments and security baricades at Anushaktinagar and Old Mandala under TTM-IV maintenance unit, Mumbai.

Amount

Abstract Sheet

Part I: Main Item

Part II: Rebate Items

Description of Work / Item(s)

Amount

Part I : Main Works

Providing and fixing structural steel using angles, flat, plates and lugs etc. at all levels and locations as per design and pattern as required at site, embedding inside masonry/ concrete wall, cutting of reinforcement if any including painting structural steel with two coats of synthetic enamel paint of approved shade and make and one coat of approved steel primer, fabrication, welding including necessary scaffolding etc. complete all as per specification and as directed by the Engineer- in- Charge.

Structural steel will be supplied by contractor

Structural steel will be supplied by department. (Rate shall be inclusive of all labour, welding, cutting, loading, unloding & transporation within Anushakti Nagar & Old Mandala Colony.

Providing and fixing Galvanised Iron section work in built up tubular (round, square or rectangular hollow tubes, plate, chain etc.) etc. at all levels and locations as per site condition, drawing and pattern as required at site, embedding inside masonry/ concrete wall, cutting of reinforcement if any including cutting, hoisting, fixing in position including welding and bolted with special shaped washers including necessary scaffolding etc. complete all as per specification and as directed by the Engineer- in- Charge.

Galvanised Iron Section will be supplied by contractor

Galvanised Iron Section will be supplied by department. (Rate shall be inclusive of all labour, welding, cutting, loading, unloding & transporation within Anushakti Nagar & Old Mandala Colony.

Providing and fixing stainless steel work for play equipments and other works using SS-304 stainless steel sections such as stainless sheet plate panels, seamless pipe/tube, square, tees, angles, plate, flat patti and other sections as required for work at all levels & locations, as per approved pattern & design including necessary S.S bend, tees, brackets, base/cover plate and holders clamps to hold pans in all size & shapes etc welding/nut bolt necessary anchoring, polishing and fixing making good the surfaces including all wastage etc. as per specifications approved drawings, including removing existing and as directed by Engineer-in-charge.

Providing & fixing heavy quality solid PVC wheels of 150 mm dia approx size, for security barricade including new nut, washer, repairing & welding of existing wheel axle, oiling, greasing, required welding, cutting, removing existing damaged wheels etc complete all as per specifications and as directed by EIC

Providing and fixing in position heavy quality FRP seat for swing as per existing pattern and size (Approx size 300 X 300 X 200 mm) or approved eqivalent including all necessary fittings & fastners etc complete all as per specifications and as directed by the Engineer- in- Charge.

Providing and fixing in position heavy quality FRP seat for See-Saw as per existing pattern and size (Approx size 300 X 250 X 150 mm) or approved eqivalent including all necessary fittings & fastners etc complete all as per specifications and as directed by the Engineer- in- Charge.

Providing and fixing in position heavy quality woven cloth belt seat for Swing having approx thickness 10 mm as per existing pattern and size (Approx size 800 mm X 150 mm) or approved eqivalent including all necessary fittings & fastners etc complete all as per specifications and as directed by the Engineer- in- Charge.

Providing and laying PCC (1:2:4) using graded stone aggregate of 20 mm max size, at all levels & locations for play equipments supports, including mixing, compaction, finishing, curing, form work etc. at all levels including necessary scaffolding and including demolishing existing damaged PCC, disposal of debris, necessary earth work in excavation complete all as per specifications and as directed by the Engineer- in- Charge.

Painting old steel work with two coats of Synthetic enamel paint of approved shade & make over one coat of primer including preparing surfaces, thorough scapping of MS/GI work, filling with putty wherever required, scaffolding & cleaning etc. complete all as per specifications & as directed by the Engineer-in-Charge

a) On steel surfaces with two finishing coats over a coat of steel primer.

Carrying out lettering work over security barricade as per existing style & pattern, at all levels & location using approved make and shade synthetic enamel paint including scaffolding, cleaning etc complete all as per specifications and as directed by EIC. ( Note:- The letter size will be around 8". The each barricade will have word like STOP, SECURITY, DCSEM etc. The lettering work over one barricade on both side will be counted as one job)

Description of Work / Item(s)

Amount

Part-B -Rebate Items

Rebate for taking away dismanteled item by the contractor

Old structural steel members, angle, flat etc

M/S NDW CONSTRUCTION.CO

M/S NDW CONSTRUCTION.CO

Ramesh And Associates