Job 1 Construction of HPPWD Circuit House at Una, Tehsil and Distt. Una H.P Sub Head C.o Building Portion, Water Supply and Sanitary Installation, Rain Water Harvesting Tank and Septic Tank etc.

Amount

Excavation in foundation trenches etcetera in all classification of soil such as pick work,jumper work,pick jumper work,blasting work and hard blasting work in dry or saturated condition upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable material separately as directed and then returning the stacked soil in 15cm(fifteen centimeter) layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by the Engineer in charge including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials .Any loss to the public /private property during the course of execution shall be abssolute respossibility to the contractor which shall have to be duly compensated by him in all cases as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Filling in plinth with sand under floor including watering ramming consolidating and dressing complete for all heights including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Excavation in drain and channels etcetera in all kind of earth work such as spade work, pick work, Jumper work, Pick jumper work, blasting work and hard blastig work chselling/wedging rock, etcetera including dressing of side and bed and disposing of excavated earth upto and leads disposed earth to be levelled and neatly dressed including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm ( thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforcement and plain concrete work in foundation footing and bases of columns etcetera and mass concrete including carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs landings and the like floors in all thickness including carriage of material entire within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm( three decimal fifteen millimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square rectangular or polygonal in plan in any height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm( three decimal fifteen millimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in circular or curved in plan including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) size so as to give a fair finish including centering ,shuttering ,strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in:- beams cantilevers girders and lintels side and soffit of beams ,beam haunchings, cantilevers, bressumers and lintels in any depth / heights /thickness including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters buttresses,plinth and string courses and the like including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give fair finish including centering ,shuttering ,strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work:- in edges of slabs and breaks in floors and walls etcetera upto any width /height complete including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter)so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter)so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical fins and vertical sun breakers including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (one cement: six sand:twelve graded crushed stone aggregate 40mm( forty millimeter nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth in all heights / depths including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1 : 5 : 10 ( one cement five sand :ten graded crushed stone aggregate 40mm(forty millimetre nominal size)mechanically mixed and curing complete excluding cost of form work in retaining walls/breast walls as per HP.PWD.,specifications upto all height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying cement concrete 1:3:6 (one cement: three sand:six graded crushed stone aggregate 20mm( twenty millimetre nominal size)mechanically mixed and curing complete excluding cost of form work in foundation and plinth upto all thickness/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying damp proof course 38mm (thirty eight millimeter)thick with cement concrete 1:2:4 (One cement:two sand:four graded crushed stone aggregate 12.5mm (twelve point five millimeter )nominal size) and curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100(eighty/hundred) or equivalent using 1.70 kg. (one point seventy kilogramme)per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimetre square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic metre mechanically mixed including curing complete excluding cost of form work and reinforced concrete work in foundation and plinth including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive including sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mixed mechanically, and curing complete to give a smooth and even surface including centering and shuttering etcetrera . but excluding cost of reinforcement in string course coping bed plates, anchor blocks plain window sills and the like Up to all heights complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in foundation,footing bases of columns and the like and mass concrete in all depth/heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in suspended floors, roofs, landing and shelves and their supports balconies beams,girders, bressumers and cantilevers upto all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in stair cases(except spiral stair case) excluding landing but including the preparing of the surface and finishing upto all heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in vertical and horizontal fins(thickness not more than 0.10m) individually or forming box louvers and projected band upto all heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts up to all heights complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in Walls (any thickness but not less than 0.10 metre (zero point ten meter thickness) including attached pilasters buttersses,plinth and string courses etcetera from top of foundation in all height/depth including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimetre square ) with minimum cement content of 340kg ( three hundred forty kilogramme ) per cubic metre mechanically mixed and vibrated including curing complete reinforcement concrete chajjas not exceeding 10cm.(ten centimetre)thickness up to floor all level including finishing the exposed surface with cement mortar1:3(one cement:three sand) to give a smooth and even surface including centring and form work and curing complete excluding the cost of reinforcement work including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Boring, providing and installation of bored cast in situ reinforced cement concrete piles in all kinds of soil of specified dia and length below the pile cap to carry a safe bearing load not less than specified, excluding the cost of steel reinforcement but including the cost of M-30(M-thirty)mix concrete ready mix cement concrete, cost of boring with bentomite solution and temporary casing of appropriate length for setting out and removal of the same, pumping and bailing out of water where required and the length of the pile to be embedded in the pile cap etcetera by percussion drilling using direct mud circulation (DMC) or boiler and chiesel technique by tripod and mechanical winch machine ( length of pile for payment shall be measured up to bottom of pile cap.) Note: Truck mounted rotary ITMR ( Tube well boring machine shall not be used.) i) 450 mm (four hundred fifty millimetre) dia piles including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials any loss to the public/private property during the course of execution shall be the obsolute responsibility to the contractor which shall have to be duly compensated by him in all cases as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying tor steel(TISCO, JINDAL PANTHER of (JSPL) /Sail/RINL/Shyam steel make) reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing in RCC work smooth finishing of the exposed surface with cement mortor 1:3(One cement:three sand) in all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:6(one cement: six sand ) including curing complete in any depth/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in superstructure above plinth level upto all floor level /height in cement mortar 1:6(one cement: six sand ) including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Second class half brick masonry in common burnt clay building bricks in Cement mortar 1:4(One cement four sand) infoundation and plinth including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government..

Second class half brick masonry in common burnt clay building bricks in Cement mortar 1:4(One cement four sand) superstructure above plinth level including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction of the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Boulder filling dry hand packed under floor/retaining walls including watering, ramming and consolidating with at least one broken stone face and packed in proper upto all heights as per the direction of Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing wood work in frames of doors,windows,clerestory windows and other frames wrought, framed and fixed in position Ist class teak wood including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing flush door shutters Novapan, Kitply, National, Archid ply, Action Tesa, Greendecorative type core of black board construction with frames of first class hard wood and well matched first class indianteak ply veneering with vertical grains or cross bends and face veneering on both faces of shutters 35mm(thirty five millimetre) thick including black enamelled M.S. butt hinges including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing flush door shutters Novapan, Kitply, National, Archid ply, Action Tesa, Green core of block board construction with frame of first class hard wood and well matched first class indian teak ply veneering with vertical grains or cross band and face veneers on one face and commercial ply veneering with vertical grains cross band on other face of shutters 35mm(thirty five millimetre) thick including black enamelled M.S. butt hinges including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 12mm(twelve millimetre) thick prelaminated board Novapan, Kitply, National, Archid ply, Action Tesa, Green both side bwp phenol bounded exterior / interior grade ISI marked No.IS:12822 of approved shade panelled shutters with frame of first class deodar wood for doors including bright finished/ black enameled iron butt hinges with necessary screws 40mm(forty millimetre) thick frame including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and Fixing factory made UPVC door frame, made of UPVC exturded sections , of size 65 mm x 55 mm(sixty five into fifty five millimetre) with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing and fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing factory made UPVC white colour casement/ casement cum fixed glazed windows comprising of UPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm (one hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame and sash shallbe mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable including entire carriage of material within all leads and lifts.The rates are inclusive sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing factory made UPVC white colour casement/ casement cum fixed glazed windows comprising of UPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm (one hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame and sash shallbe mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable including entire carriage of material within all leads and lifts.The rates are inclusive sale tax octori, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing factory made UPVC white colour casement/ casement cum fixed glazed windows comprising of UPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm (one hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame and sash shallbe mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)5 Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable including entire carriage of material within all leads and lifts.The rates are inclusive sale tax octori, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etcetera with 6 mm (six millimetre) thick clear float glass both side, having 12 mm (twelve millimetre) air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etcetera as per specifications, drawings and direction of Engineer-in-charge complete including entire carriage of material within all leads and lifts.The rates are inclusive sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3 mm (fifteen into three millimetre)Novapan, Kitply, National, Archid ply, Action Tesa, Green nuts and bolts complete Stainless steel (grade 304) wire gauze of 0.5 mm (zer point five millimetre)dia wire and 1.4 mm(one point four millimetre) aperture on both sides including entire carriage of material within all leads and lifts.The rates are inclusive sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing M.S. grills of required pattern in wooden /steel/ PVC frames of windows etcetera with M.S. flats square or round bars with rounded headed bolts and nuts or by screws ornamental grill including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 12 mm(twelve millimetre) thick frameless toughened glass door shutter Novapan, Kitply, National, Archid ply, Action Tesa, Green of approved brand and manufacture, including providing and fixing top and bottom pivot and spring type fixing arrangement and making necessary holes etcetera for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etcetera to be paid separately) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture(Harison or its equivalent) (confirming to IS-6315) for aluminium door including cost of cutting floors as required, embedding infloors and cover plates etcetra complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing aluminium sheet 1mm (one millimeter) thick in expansion joints vertically fixed with screws or nails complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing anodized aluminium(Zindal) sliding door bolts anodized colour or shade with bolts and nuts screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. 300×16mm(three hundred into sixteen millimeter)

Providing and fixing anodized aluminium (Zindal)sliding door bolts anodized colour or shade with bolts and nuts screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. 250×16mm(One hundred fifty into sixteen millimeter)

Providing and fixing anodized aluminium (Zindal)tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. i)200×10mm(two hundred into ten millimetre)

Providing and fixing anodized aluminium(Zindal) tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. . . i)150×10mm(one hundred fifty into ten millimetre)

Providing and fixing aluminum (Zindal)handles anodized transparent or dyed to required colour and shade with necessary screws etcetera including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. . . (a)125mm(one hundred twenty five millimetre)

Providing and fixing aluminum(Zindal) handles anodized transparent or dyed to required colour and shade with necessary screws etcetera including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .. (a)100mm(one hundred millimetre

Providing and fixing bright matt finished stainless steel handles (Zindal)of approved quality and make with necessary screws etcetera including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 50mm(fifty millimeter) bright finished brass cup board ward robe knob (Zindal) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 65x35mm( sixty five into thirty five millimetre)special qualtity bright finished brass cup board locks or ward robe locks with six levers(Harison or its equivalent) including entire carriage of material within all leads , lifts and other incidental.The rate are inclusive octroi, royality,malkhana ,sale tax,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing 100mm(one hundred millimetre) bright finished brass door stopper (Zindal or its equivalent) with rubber cushion screw etcetera to suit shutter thickness complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 150mm ( one hundred fifty millimetre ) bright finished hard drawn hooks and eyes including entire carriage of materials within all leads , lifts and other incidentials.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 12mm thick (twelve millimetre ) thick and 100mm (hundred millimetre )wide pelmet with 25mm (twenty five millimetre )dia wooden curtain rod and brackets including fixing with 25x3mm ( twenty five into three millimetre ) M.S. flat 10cm. Long and plugs etcetera complete including entire carriage of material within all leads , lifts and other incidental. The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 10 mm(ten millimetre) dia make of Novapan, Kitply, National, Archid ply, Action Tesa, Green bright finished brass ball catcher with rubber cushion screws etcetera to suit shutter thickness complete including entire carriage of material within all leads , lifts and other incidental. The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 25mm(twenty five millimetre) thick water proof make of Novapan, Kitply, National, Archid ply, Action Tesa, Green commercial board in shelves/box for cup board with butt joints and fixing with nails and screws etcetra complete) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 25mm(twenty five millimetre) commercial board water make of Novapan, Kitply, National, Archid ply, Action Tesa, Green proof shutters for CB including fixing with piano hinges with screws complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing venerred decorative ply wood make of Novapan, Kitply, National, Archid ply, Action Tesa, Green lining with decorative surface on one face with butt jointing and nails(frame work and cover fillets to be measured and paid for separately(Century ply/Black Cobra make) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 19mm(Ninteen millimeter) thick water proof make of Novapan, Kitply, National, Archid ply, Action Tesa, Green commercial board in shelves/box for CB with butt joints and fixing with nails and screws complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 19mm (Ninteen millimeter) thick water proof commercial board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etcetera complete make of Novapan, Kitply, National, Archid ply, Action Tesa, Green in shelves/box for CB with butt joints and fixing with nails and screws complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax, sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 4mm(four millimeter) thick water proof kit ply make of Novapan, Kitply, National, Archid ply, Action Tesa, Green of standard quality ISI mark and approved shade and colour in panelling and wall lining including fixing with approved adhesive, butt jointing and nails and screws complete (Base frame work to be measured and paid for separately) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing square edge cover fillets beading 19x6mm (ninteen into six millimeter) section including mitring at junctions with nails 1st class teak wood complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing square edge cover fillets beading 60x12mm ( Sixty into tweleve millimetre) section including mitring at junctions with nails 1st class teak wood complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing fabrication and supplying and fixing panels of Alluminium Composite panel(ACP) (Zindal make) ceiling in pan shape in metalic colour of approved shade made out of 4mm(four millimeter) thick alluminium Composite panel(ACP) material consisting of 3mm(three millimeter) thick FR grade mineral core sundwiched between two alluminum sheets (each 0.5mm thick ) (point five millimeter)The Aluminium Composite panel(ACP) ceiling sheet shall be coil cated with KYNAR 500 based PVDF/Lumiflon based fluoropolymer resin coating of approved colour and shade on face 1 and polymer (services)coating on face 2 as specified using stainless steel screws nuts and bolts washers cleats,fastering brackets weather silicone sealent backer rods etcetera complete as required to perform as per specifications .The Base frame work for ACP ceiling is payable under the relvent aluminium complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,including fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etcetera of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etcetera including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing 10mm(ten millimetre) thick plaster of paris (Gypsum unhydrous) ceiling upto a height of 5 metres(five metres) above floor level overalluiminum stripes 25mmx3mm(twenty five into three millimetre) with 10 mm(ten millimetre) gap in between and reinforced with rebbit wire mesh fixed to Alluiminum frame (framework to be measured and paid for separately) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with Jindal aluminium extruded built up standard tubular and other sections of approved make confirming to IS-733 and IS-1285 anodized transparent or dyed to required shade according to IS- 1868(minium anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions and top and bottom, sides with required PVC/neoprene fill etcetera Aluminium sections shall be smooth, rust free, straight mitered and jointed mechanically where ever required including cleat angle, aluminium snap leading for glazing/ paneling, C.P. brass stainless steel screw, all complete as per architectural drawing as per the directions of Engineer-in-Charge for: a)Door,windows and ventilators and glazed partitions frames including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying Kota stone slab flooring 20mm(twenty millimeter)(average) thick base of cement mortor 1:4(one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 25mm(Twenty five millimeter) thick upto any floor level /height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying Kota stone mirror polished in uniform colour slab 25mm(twenty five millimetre) thick in risers of steps skirting dado and pillars laid on 12mm(tweleve millimeter) thickcement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with grey colour to match the pigment including rubbing and polishing complete upto any floor level height including entire carriage of material within all leads and lifts and other incidentials and the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. .

Providing and laying granite stone in flooring 20mm(twenty millimetre ) (average) thickness base of cement mortar 1:3(1cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete.upto any floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying 12mm(twelve millimeter) thick granite stone miror polished in uniform shade cladding on face of arch masonry walls on 12mm(twelve millimeter) thick cement plaster 1:3(One cement: three sand) jointed with cement slurry including scaffolding etcetera complete upto floor all level/height including entire carriage of material within all leads and lifts and other incidentials and the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,,sale tax,GST,labour cess or other taxes imposed by the Government. .

Making moulded nosing in marble stone including returned moulded ends and angles to moulding including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government. .

Providing and fixing 10mm(ten millimeter) thick double charged polished anti skid water proof stain and impact resistent heavy duty vetrified tiles Orinet/Kajaria/Nitco /orient /RAK/Somany Johnson and Johnson (600x600x10mm)(six hundred into six hundred into ten millimeter)manufactured of approved shade and colour in flooring treads of steps and landing laid on a bed of 12mm(twelve millimeter) thick cement mortor 1:3( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as required complete upto all floor level/ height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying Duro stone vetrified tiles double charge Orinet/Kajaria/Nitco /Rak/somany/ Johnson and Johnnson/orient (600x600x8mm)(six hundred into six hundred into eight millimetre) in grey/ coloured of approved shade in skirting risers of steps and dado on 12mm(twelve millimetre) thick cement mortor 1:3( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete Up to all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying 20mm(twenty millimeter) thick acid proof tiles Orinet/Kajaria/Nitco /Rak/somany/ Johnson and Johnnson/orient 300x300mm (three hundred into three hundred millimeter) size manufactured of approved shade and colour in skirting kerb laid over 12mm(twelve millimeter) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete Up to all floor level /height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing Antiskid nonslipery ceramic tiles 300mmx300mmx 5.5 mm ( three hundred into three hundred into five point five miilimeter) thick Orinet/Kajaria/Nitco /Rak/somany/ Johnson and Johnnson/orient treads of step laid on bed of 12mm (twelve millimeter ) thick cement mortar 1:3 (one cement :three sand ) and jointing with neat cement slurry upto floor all level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

White glazed tiles 300x300x6mm(three hundred into three hundred into six millimeter ) Orinet/Kajaria/Nitco /Rak/somany/ Johnson and Johnnson/orient thick in skirting risers of steps and dado 12mm(twelve millimeter) thick cement mortor 1:3 ( one cement: three sand) and jointed with neat cement slurry including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying 8mm (eight millimetre)thick Endura/ tactile tile (for vision impaired persons as per standards) antiskid water proof stain and impact resistant heavy duty vitrified tiles Nitco or equivalent 600x300x8mm(six hundred into three hundred into eight millimetre) Orinet/Kajaria/Nitco /Rak/somany/ Johnson and Johnnson/orient manufactured of approved shade and colour in skirting kerb laid over 12mm thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto floor all level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying 19 mm(Ninteen millimeter) thick Mandana red stone slab in uniform shade size 60x60cm(sixty into sixty centimeter) Orinet/Kajaria/Nitco /Rak/somany/ Johnson and Johnnson/orient in flooring on 20mm (twenty millimeter)average thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete upto floor all level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying 19 mm(Ninteen millimetre) thick Mandana red stone of size 60x60cm(Sixty into sixty centimeter) Orinet/Kajaria/Nitco /Rak/somany/ Johnson and Johnnson/orient in uniform shade in treads and risers of steps on a bed of 20mm(Twenty millimeter) thick cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including preparing of nosing including rubbing and granite polish finish complete upto floor all level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,,GST,labour cess or other taxes imposed by the Government. .

Providing and laying 60mm(sixty millimeter) thick NTC make heavy duty precast cement concrete interlocking paver blocks vibro compacted upto M-50(M-fifty) grade including border or kurb block grey or coloured ever sub base of concrete with 25mm (Twenty five millimeter)thick average thickness of cement mortar 1:4(One cement: four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of black curing rubbing polishing complete upto floor all level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing polycarbonated transparent sheet (Tata Durashine make) 1.20mm(one point twenty millimetre) thick in roofing with galvanised J or L hooks bolts and nuts with GI limpets and bitumen rubber washers complete with all accessories including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing in position collapsible steel shutters (Tata Durashine make)with vertical channels 20mmx10mm x 2mm(twenty into ten into two millimeter) and braced with flat iron diagonal 20mmx 5mm(twenty into five millimeter) size with top and bottom rail of lock including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing pre painted steel sheet (Tata Durashine make) in roofing over all steel trusses providing and fixing with hot applied metallic zinc coated Kolar Metal or its equivalent pre painted single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimetres) thickness having 1060 mm (one thousand sixty millimeter) cover width, overall width 1126mm (one thousand one hundred twenty six millimetre), 28mm (twenty eight millimetres) crest depth at 353+2mm (three hundred fifty three plus two millimetre) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimeters). The main crest width at top of 25mm (twenty five millimetre) and at lower 81mm (eighty one millimetres) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with self tapping screws 5.5mm (five point five millimeter) dia and 5.5cm (five point five centimeter) length with as required with EPDM seal complete up to all floor level /height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing pre painted steel(Tata Durashine make)sheet in ridges having proper Gola of plain prepainted or hips 60cm (sixty centimetre) overall with hot dipped metallic zinc coated, Kolar Metal or its equivalent make over steel section, pre painted single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimeters) thickness having 1060 mm (one thousand sixty millimetre) cover width, overall width 1126mm (one thousand one hundred twenty six millimetre), 28mm (twenty eight millimetre) crest depth at 353+2mm (three hundred fifty three plus two millimetre) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimetre). The main crest width at top of 25mm (twenty five millimeters) and at lower 81mm (eighty one millimetre) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of 5 (five) microns over 5 polyster (five) microns primer coating including fixing with self tapping screws 5.5mm (five point five millimeter) dia and 5.5cm (five point five centimeter) length complete with all accessories as required with EPDM seal complete up to all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing flushing 38cms(Thirty eight centimetre) overall with 0.60mm(zero point sixty millimetre) thick prepainted sheet (Tata Durashine make ) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of 20(twenty microns over 5(five micron primer coating plus back coat polyester of 5(five microns over 5 (five microns primer coating including fixing with prepainted iron J or L hooks bolts nuts 6mm(Six millimetre) dia and prepainted GI limpet bitumen washer complete with all accessories as required including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 30cm(thirty centimetre) wide 90cm(Ninety centimeter)over all semicircular 0.60mm(Zero point sixty millimetre) thick prepained sheet (Tata Durashine make ) gutter with iron brackets 40x3mm (Forty into three millimetre)size bolts and nuts and washers etcetera including making necessary connections with rain water pipe completewith all accessories as required including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. .

Providing and fixing M.S.BP sheet(Tata Durashine make) 1.66mm to 2mm(one point sixty six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting,fixing and welding to steel roof members and applying a coat of red lead primer complete as per instruction of Engineer-in-charge(Base members of steel work shall be measured & paid separately) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing PVC stay and clamps for rain water pipe 110mm(One hundred ten millimeter) dia (Phenolex/Vectus or its equivalent) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 100mm(one hundred millimeter) dia on wall face PVC (D-plast) (Supreme , AKG, Finolex, Prime, Kisan, SFMC)rain water pipe of working pressure not less than 4.5 kg (four point five kilogramme)per square centimeter including filling the joints with approved adhesive complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 150mm(one hundred fifty) dia on wall face PVC (D-plast) (Supreme , AKG, Finolex, Prime, Kisan, SFMC)rain water pipe of working pressure not less than 4.5 kg (four point five kilogramme)per square centimeter including filling the joints with approved adhesive complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing on wall faces PVC (D-plast) (Supreme , AKG, Finolex, Prime, Kisan, SFMC) accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain bend 110/ 150mm ( one hundred ten/one hundered fifty millimeter) dia including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing on wall faces PVC (D-plast) (Supreme , AKG, Finolex, Prime, Kisan, SFMC) accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain shoe 110/ 150mm ( one hundred ten/one hundered fifty millimetre) dia including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing on wall faces PVC (D-plast) (Supreme , AKG, Finolex, Prime, Kisan, SFMC)accessories for rain water pipes including filling the joints with approved adhesive complete PVC shoe 110/ 150mm ( one hundred ten/one hundered fifty millimeter) dia including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Steel work (TISCO, JINDAL PANTHER of (JSPL) /Sail/RINL/Shyam steel make) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint complete in all respect in trusses and trussed purlins in buildings including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Steel work(TISCO, JINDAL PANTHER of (JSPL) /Sail/RINL/Shyam steel make) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint complete all respect In grating, framed guard bars ladders, railing brackets and similar works including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Steel work(TISCO, JINDAL PANTHER of (JSPL) /Sail/RINL/Shyam steel make) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In beams joists channels, angles, tee , flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing MS round (Tata /Sail/Shyam steel) holding down or anchor bolts with nuts and washers plates complete all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll taxsale tax,,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing moulded hand rail of MS ( Tata, Jindal(Hisar) Parkash sheel Tube bhushan industries make) hollow pipe 50mm(fifty millimetre ) dia welded in straight length over MS flat at top of vertical balusters including one coat of red oxide priming coat complete all respect (MS flat and balusters or railings shall be measured and paid separately including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Applying priming coat Nerolac, Berger,Asian paint Brand over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting complete all respects including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Painting two coats (excluding priming coat)make of ICI, Nerolac, Berger, Asian Paints, Shalimar on new wood and wood based surfaces with premium enamel paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping with white enamel paint complete all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Painting two coats make of Nerolac, Berger,Asian paint Brand excluding priming coat) on new steel and other metal surface with premium enamel paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with white enamel paint complete all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Polishing two coats Nerolac, Berger,Asian paint Brand with French polish on new wood and wood based surfaces to give an even surface by including cleaning the surface of all dirt, dust and sand papered smooth including a coat of wood filler including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and applying of Birla white level plast over prepared surface including grinding, chiseling, pre-wetting. Cleaning with wire brush to remove dirt,dust, grease oil etcetra level ceiling plaster with level D-plast to be mixed throughly with mechanical stirrer manually by adding 23 to 26% of clean potable water and waiting for 5 to 10 minutes before application coat thickness to be between 3-12mm After cleaning the surface patch coat of level plast to be applied to ceiling to fill all pores honey combing areas using hand trowel.After complete dryng of patch plaster finish coat of level plast applied with hand trowel and finishing the same with aluminium bottom.At the time of application applicator should wear hand gloves while using level plast Providing and applying 2 coats of Birla white wall care putty with a maximum thickness of 1 to 1.5mm over base coat of level plast including pre-wetting,cleaning of blade marks , removal of loose particle etcetera WCP to be mixed thoroughly with mecahnical stirrer/ manually by adding 35 to 40% of clean potable water and waiting for 5 to 10 minutes before application.Second coat to be applied after 2 to 3 hours of complete drying of Ist coat and after rubbing with emery paper of size 500 and above to remove the putty blade marks including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level/height including arrises, internal rounded angle, chamfers and/or rounded angles not exceeding 80mm(eighty millimeter) in girth and fuinished even and smooth in cement mortar 1:6 (1 cement : 6 sand) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

15mm (fifteen millimetre)cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering in all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(eighty millimetre) in girth and finished even and smooth in cement mortar 1:4 ( one cement :four sand) including curing and entire carriage of material with in all leads and lifts and other incidentals .The rate inclusive sale tax octori, royality,malkhana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government..

20mm (twenty millimetre)cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering in all floor level/height including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six sand) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping dust loose materials and other foreign matter sand papered smooth to give final finish to the surface complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Distempering (two coats) with oil bound washable distemper with Nerolac, Berger,Asian paint Brand and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly burshing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer upto all floor level in all heights including entire carriage of materials with in all leads and lifts as per the direction of Engineer-in-Charge.The rate inclusive octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Nerolac, Berger,Asian paint Brand Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 11.5 mm (Eleven point five millimetre) thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Wall painting (two) with acrylic emulsion paint of approved brand and manufacture make of Nerolac, Berger,Asian paint Brand Paints shalimar for interior grade an undecorated wall surface give an even shade including thoroughly brushing the surface to given an even shade including thoroughly brushing the surface free from mortor droppings and other foreign matte and sand papered smooth applying a putty a required for melting the surface including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Finishing wall with Excel Exterior paint / Apex Exterior paint Nerolac, Berger,Asian paint Brand of approved shade with one coat of hritage wall plaster acrylic wall putty of approved quality or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etcetera including sand paper smooth complete including entire carriage of material with in all leads and lifts and other incidentialsThe rates are inclusive octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing plinth protection 50mm(fifty millimetre ) thick in cement concrete 1:3:6(one cement: three sand: six graded crushed stone aggregate 20mm( twenty millimetre ) nominal size including entire carriage of material with in all leads and lifts and other incidentialsThe rates are inclusive octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm(seventy five millimeter) thick (unconsolidated) bed or dry brick/stone aggregate 40mm(forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including entire carriage of material with in all leads and lifts and other incidentialsThe rates are inclusive octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall.15x22 cm (fifteen into twenty two centimeter ) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement:six Sand) including earth work and laying 10 cm ( ten centimeter ) cement concrete in 1:5:10 (one Cement : five Sand: ten graded stone aggregate) of :40 mm(forty millimeter ) nominal size and 7.5 cm (seven point five centimeter ) cement concrete 1:2:4 (One Cement : Two Sand : Four Graded stone aggregate of 20 mm(twenty millimeter ) nominal size and finished with a floating coat of neat cement complete as per standard design.40 mm (forty millimeter )thick including black enamelled M.S. butt hinges including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement water proofing treatment with Dr.FIXIT FAST FLEX or equivalent with two component polymer modified comentitious coating consisting of comentitious powder and a polymer liquid in two coats for Ist coat: clean and saturate surface and then applying a coat of Dr.FIXIT and the same process shall be extended upto 300mm vertically the sceond coat shall be applied in opposite direction after four to six hours of application of firsty coat than sprinkling of sand on top surface of applied Dr.FIXIT then apply Cement mortor 1:4(one cement:four sand) and admixed with 200ml.(two hundred milli- litre)of pid proof LW @ 200 ml(two hundred milli litre). per 50kg.(fifty kilogramme) bag complete as per archt.drg.and direction of engineer including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Grading roof for water treatment with cement concrete 1:2:4 (one cement:two sand :four graded stone aggregate 20mm(twenty millimeter) nominal size including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing readymade steel Godrej almirah made of superiour quality having four shelves and internal chest and other fittings and powder coated paint in all side complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing floor mounted, white vitreous china Parryware ,Hindware sanitaryware, Neycer, Cera single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres(ten lirres) with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etcetera including making connection with the existing P or S trap complete including entire carriage of material with in all leads and lifts and other incidentals The rate inclusive octroi, royality,malkhana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing white vitreous china Parryware ,Hindware sanitaryware, Neycer, Cera extended wall mounting water closet of size 780x370x690 mm(seven hundred eight into three hundred seventy into six hundred ninety) of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etcetra complete including entire carriage of material with in all leads and lifts and other incidentals The rate inclusive octroi, royality,malkhana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 630mmx450mm (six hundred thirty into four hundred fifty millimeter) No. 1001 of Parryware ,Hindware sanitaryware, Neycer, Cera in white shade complete all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings in white shade make of Kingston, Gem, Parko, Techno, JAL, ESS, JAGUAR, Seiko including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter)dia CP brass waste (heavy duty ) Kingston, Gem ,Parko, Techno, Jal,ESS ESSS, Jaquar, Seiko for wash basin or sink complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter)dia PVC waste pipes Kingston, Gem ,Parko, Techno, Jal,ESS ESSS, Jaquar, Seiko steel for wash basin or sink including brass check nut complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 1500mm x 450 mm(One thousand five hundred milimeter into four hundred fifty millimeter) bevelled edge mirror of superior glass mounted on 6mm (six milimeter) thick A.C. sheet or plastic sheet and fixed to plastic plugs with CP brass screws and washers make of Atul, Modiguard, Golden Fish complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden plugs with CP brass 750mm x20mm (seven hundred fifty into twenty millimetre ) size of Kingston, Gem, Parko, Techno, JAL, ESS, JAGUAR, Seiko complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 600mmx120mm(six hundred into one hundred twenty millieter) glass shelf with CP brass brackets and squared rail fixed to wooden plugs with CP brass screw of Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screw Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko including entire carriage of material with in all leads and lifts and other incidentalsThe rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing CP brass bib tap with capstan head 15mm dia Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing C.P. brass pillar tap with capstan head 15mm dia Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing stainless steel kitchen sink AMC,Unik,Diamond, Neelkanth with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting 470 x 610 mm (four hundred seventy into six hundredten millimeter) with bowl depth 178 mm(one hundred seventy eight millimeter) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing CP stop cock 15mm( fifteen millimeter) dia IVC, Leader, Prayag complete all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing C.P.brass toilet paper holder Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko including entire carriage of material with in all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing PVC connection pipe Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko with brass union 45cms. Length 15mm nominal bore (fifteen millimeter) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimeter) nominal bore brass fullway valve with wheel IVC, leader, Prayag make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 20mm(twenty millimeter) nominal bore brass fullway valve with wheel IVC, leader, Prayag make complete all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimeter) nominal bore brass ball way valve IVC, leader, Prayag make(horizontal plunger type) high pressure with polythene plastic floats complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimeter) IVC, leader, Prayag make ferrule including borning and taping the main including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Making connection of galvanised steel branch with galvanised mild steel main 20mm nominal bore (twenty millimetre nominal ) by providing and fixing tee including cutting and approved adhesive complete including enitre carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 (one cement : two sand : four graded stone aggregate ) 20mm(twenty millimetre) nominal size foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm(forty millimetre) nominal size inside plastering 15mm (fifteen milimetre) thick with cement mortar 1:3 (one cement : three sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement :two sand : four graded stone aggregate 20mm (twenty millimetre)nominal size finished smooth complete including curing and testing. Inside size 800mm x 800 mm x 500 mm (eight hundred millimetre x eight hundred millimetre x five hundred millimetre) deep including C I cover with frame (Light duty single seal pattern I) 455mm x 610 mm (four hundred fifty five milimetre into six hundred ten millimetre) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilograms) weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 200mm (two hundred millimetre) thick brick walls of masonry using common burnt clay building bricks in cement mortar 1:3(one cement: three sand ) and curing complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 (one cement : two sand : four graded stone aggregate ) 20mm(twenty millimetre) nominal size foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm(forty millimetre) nominal size inside plastering 15mm (fifteen milimetre) thick with cement mortar 1:3 (one cement : three sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement :two sand : four graded stone aggregate 20mm (twenty millimetre)nominal size finished smooth complete including curing and testing. Inside size 800mmx800mm and 1000mm ( eight hundred milimetre into eight hundred millimetre into one thousands millimetre) deep including CI cover with frame (light duty single seal pattern-I) 455mmx610mm(four hundred fifty five milimetre into six hundred ten millimetre) internal dimensions total weight of cover and frame to be not less than 38 kg ( thirty eight kilograms) weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 200mm (two hundred millimetre) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(one cement: three sand ) and curing complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing stone ware gully trap grade 'A' Prefect, Hind or ISI marked S.W.pipes complete with CI grating brick masonry chamber in cement mortar 1:5(one cement:five sand) and water tight C.I. cover with frame of 300mm×300mm (three hundred into three hundred millimetre)size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg square mouth trap 100mm x100mm (one hundred into one hundred millimetre)size P-type complete all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing to wall ceiling floor galvanised mild steel tubes (Medium grade) BST, Jindal(Hissar), Tata steel Tubes Ltd. Prakash surya make tube fittings and clamps(Medium grade) tube fitting and clamps including making good the wall ceiling and floor 15mm(fifteen millimetre) nominal bore including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing to wall ceiling floor galvanised mild steel tubes (Medium grade)BST, Jindal(Hissar), Tata steel Tubes Ltd. Prakash surya tube fittings and clamps(Medium grade) tube fitting and clamps including making good the wall ceiling and floor 20mm(twenty millimetre) nominal bore including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing ploytheline aluminium polythylene (PE-AL-PE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 water supply including clamp at one metre spacing cutting fixing and making good the wall etcetra but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall of BST, Jindal(Hissar), Tata steel Tubes Ltd. Prakash surya make including carriage of material with in all leads and lifts and other incidentals The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government i) 1216 (16mm O.D. pipe )

Providing and fixing ploytheline aluminium polythylene (PE-AL-PE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 water supply including clamp at one metre spacing cutting fixing and making good the wall etcetra but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall of BST, Jindal(Hissar), Tata steel Tubes Ltd. Prakash surya make including entire carriage of material with in all leads and lifts and other incidentals The rate inclusive octroi, royality,malkhana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government ii) 1620 (20mm OD pipe )

Providing and fixing 90mm dia(ninety millimetre) high pressure PVC pipe ( confirming to IS 4985-1968) BST, Jindal(Hissar), Tata steel Tubes Ltd. Prakash surya make complete with working pressure to be not less than 4.50kg(four point fifty kilogramme) with fitting ( earth work in trenches to be measured and paid for separately ) including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 110mm dia (one hundred ten millimetre)with working pressure to be not less than 4.50kg(four point fifty kilogramme)in PVC pipe BST, Jindal(Hissar), Tata steel Tubes Ltd. Prakash surya make spigot and socket , waste and ventilating pipes ISI marked including fixing with approved adhesive etcetra complete including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc.complete150mm(One hundred fiftymillimeter) dia of BST, Jindal(Hissar), Tata steel Tubes Ltd. Prakash surya make including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PE-AL-PE- composite internal seal compressing fittings Unik, KS. Amco. AVR. NVR. RR. Suw as per IS-15450-2004 for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government a. i) Equal tees 1216 of (kitec/ Kisan make )

b) (ii) Reducing Tee 1620x all branches

c) (iii) Reducers 1620x1216

d) (iv) Female elbows 1216x15mm thread

Providing and fixing PVC water storage tank ISI marked of approved brand and make (Sintex ) with 40mm (forty milimetre) nominal bore galvanised mild steel scour tube with fitting, 25mm(twenty five milimetre) nominal bore galvanised mild steel over flow tube with fittings and mosquito proof coupling of approved municipal design 15mm (fifteen milimetre) nominal bore ball valve and cover with locking arrangement providing pads of required sizes for inlet and outlet etcetera . complete including hoisting at roof level height 2000 litres (two thousand)net capacity tank complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC water storage tank ISI marked of approved brand and make (Sintex ) with 40mm (forty milimetre nominal bore galvanised mild steel scour tube with fitting, 25mm(twenty five milimetre) nominal bore galvanised mild steel over flow tube with fittings and mosquito proof coupling of approved municipal design 15mm (fifteen milimetre) nominal bore ball valve and cover with locking arrangement providing pads of required sizes for inlet and outlet etcetera . complete including hoisting at roof level height 1000 litres (one thousand)net capacity tank complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC floor trap Kingston, Gem , Parko, Techno, Jal, ESS ESS, Jaquar Seiko of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etcetra complete 110mmx75mm (One hundred ten into seventy five millimetre)) including entire carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing 90mm dia(ninety millimetre)PVC single equal branch with oval access door,Kingston, Gem , Parko, Techno, Jal, ESS ESS, Jaquar Seikoinsertion rubber washer 3mm thick bots and nuts complete including fixing with approved adhesive etcetra complete Finolex Make heavy class including carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 110mm dia(one hundred ten millimetre)PVC single equal branch with oval access door Kingston, Gem , Parko, Techno, Jal, ESS ESS, Jaquar Seikoinsertion rubber washer 3mm thick bots and nuts complete including fixing with approved adhesive etcetra complete Finolex Make heavy class including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC door bend Finolex Make with oval access door, insertion rubber washer 3mm(three millimeter) thick bolts and nuts Finolex make(High Pressure) complete including fixing with approved adhesive etcetera complete 90mm(ninety millimetre) dia including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC door bend Finolex Make with oval access door, insertion rubber washer 3mm(three millimeter) thick bolts and nuts Finolex make(High Pressure) complete including fixing with approved adhesive etcetera complete 110mm(one hundred ten millimetre) dia including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etcetera complete 90mm (ninety millimetre )dia Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimetre )dia Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etcetera Complete , 90mm (ninety millimetre) dia Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etcetera Complete , 90mm (Ninety millimetre) dia Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etcetera Complete , 110mm (one hundred ten millimetre) dia Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etcetera complete 90mm( ninety millimetre) nominal size Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etcetera complete 110mm(one hundred ten millimetre) nominal size Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC Double equal branch of required degree with oval access door insertion rubber washer 3mm (three milimeter) thick (i) 90mm ( ninety millimetre ) dia Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC Double equal branch of required degree with oval access door insertion rubber washer 3mm (three milimeter) thick (i) 110mm ( one hundred ten millimetre ) dia Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 75mm dia(Seventy five millimetre) high pressure PVC pipe ( confirming to IS 4985-1968) make (Supreme , AKG, Finolex, Prime, Kisan, SFMC) ) complete with working pressure to be not less than 4.50kg(four point fifty kilogramme) with fitting ( earth work in trenches to be measured and paid for separately ) including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC plain double equal branch ISI markedincluding fixing with approved adhesive etcetera complete Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.90mm ( Ninety millimetre ) dia

Providing and fixing PVC plain double equal branch ISI markedincluding fixing with approved adhesive etcetera complete Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. 110mm ( one hundred ten millimetre ) dia

Providing and fixing PVC Cowl Finolex Make(High Pressure)complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government..75mm (seventy five millimeter ) dia

Providing and fixing PVC Cowl Finolex Make(High Pressure)complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.110mm (one hundred ten millimeter ) dia

Providing and fixing PVC stay and clamps ISI marked of approved design with steel screws and rawl plugs etcetera complete Finolex Make(High Pressure)including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .. 90mm ( ninety millimetre ) dia

Providing and fixing PVC stay and clamps ISI marked of approved design with steel screws and rawl plugs etcetera complete Finolex Make(High Pressure)including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .. 110mm (one hundred ten millimetre ) dia

Providing and fixing 75mm dia (Seventy five millimetre) dia PVC Cowl/Cap. Finolex Make(High Pressure)complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.75mm (seventy five millimetre ) dia

Providing and fixing 100mm (one hundred millimeter) dia CP grating of superior quality for floor ,gully or Nahani trap Pryag or Jaguar make including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 8mm(eight millimetre) dia C.P/S.S.Jet with flexible tube upto 1.00 meter (one meter) with S.S.trangular plate Euoropean type WC make of Cera/ Jaguar/hindware including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink of approved AMC, Unik, Diamond, Neelkanth with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting 610 x510 mm( six hundred ten into five hundred ten milliemtre) with bowl depth 200 mm(two hundred millimeter) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink of approved AMC, Unik, Diamond, Neelkanth with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting..610 x460 mm(six hundred ten into four hunred sixty millimetre) with bowl depth 200 mm(two hundred millimeter) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 200mm dia (Two hundred millimetre) cast iron rungs with chequered or rubbed non slip surface in manhole with 200x200x100mm (two hundred into two hundred into one hundred millimetre) cement concrete 1:3:6(one cement:three sand: six graded) Finolex Make(High Pressure)complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.75mm (seventy five millimetre ) dia

Supplying CI cover lighty duty rectangular 455x610mm(four hundred fifty five into six hundred ten millimetre) without frame for man holes complete weight 23kg(Twenty three kilogramme)(Single seat pattern-1)including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10(one cement:five sand: ten graded stone aggregate 40mm(forty millimetre) nominal size for surround or encasing PVC pipes 150mm(One hundred fifty millimetre) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 3 HP Pump(Tullu pump) Serex, Kirloskar, Worthington, Crompton with all other required accessories for supply of water upto tank over slab including entire carriage of material with in all leads and lifts and other incidentals.The rates are inclusive sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

m/s kathuria constrution co.