REPAIRS TO ROOF TREATMENT, FIN FACIA, CHAJJA, FLOOR PLASTER PLUMBING AND SANITARY ITEMS AND REPAIR TO INFOMATORY SIGN BOARD IN TECH AREA AT AF STN UTARLAI

Amount

Taking down roof treatment any type any description on top of roof not exceeding 10cm thick including removal of rubbish out side MD and complete all as specified and directed

M&L for cement concrete (1:2:4) type B-0 using 12.5mm stone aggregate as in roof padding benching kerbs of mud stops, rounded or chamfered on edges including form work complete all as specified and directed

M&L for applying roof treatment on top of roof with 3 MM thick APP modified membrane minimum weighing 3 kg per sqm with non woven polyester reinforcement (centre core) shall be laid by torch application method with overlap 100mm on length side and 100mm on width side including a coat of bituminous oil based primer ( IS : 3884) @ 250gm / Sqm complete all as specified and directed

M&L for rendering 10mm thick in cement mortar (1:4) on concrete surface as on roof slab, finished even and smooth without using extra cement mix with water proofing compound as per manufacturer instruction complete all as specified and directed Note :- The cost of WPC shall be included in the quoted rate of this item.

Taking up or down existing steel water tubing 15mm bore alongwith connections fixed/laid in any situation complete all as specified and directed

Taking up or down existing steel water tubing 20mm bore alongwith connections fixed/laid in any situation complete all as specified and directed

Taking up or down existing steel water tubing 25mm bore alongwith connections fixed/laid in any situation complete all as specified and directed

S&F for galvanised iron steel water tubing 15mm bore "medium grade" with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed

Fixing only after cleaning old steel water tubing 15mm bore and connection new or old position fixed to wall/ceiling or laid in floors complete all as specified and directed

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth on stone concrete block or slab wall complete all as specified and directed

S&F for galvanised iron steel water tubing 20mm bore "medium grade" with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed

Fixing only after cleaning old steel water tubing 20mm bore and connections new or old position fixed to wall/ceiling or laid in floors complete all as specified and directed

S&F for galvanised iron steel water tubing 25mm bore "medium grade" with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed

Fixing only after cleaning old steel water tubing 25mm bore and connections new or old position fixed to wall/ceiling or laid in floors complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 250 litres & n exc 500 litres complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 500 litres & n exc 1000 litres complete all as specified and directed

Dismantling water tanks capacity exc 250 litres and n exc 500 litres complete all as specified and directed

Dismantling water tanks capacity exc 500 litres and n exc 1000 litres complete all as specified and directed

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed Note:- PVC tanks shall be ISI marked and having two layers.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed Note:- PVC tanks shall be ISI marked and having two layers.

Dismantling water tanks capacity exc 1000 litres and n exc 2000 litres complete all as specified and directed

S&F 2000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed Note:- PVC tanks shall be ISI marked and having two layers.

Dismantling water tanks capacity exc 4000 litres and n exc 5000 litres complete all as specified and directed

S&F 5000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed Note:- PVC tanks shall be ISI marked and having two layers.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed (Minimum weigth 20mm-210gms)

S&F in repair 20mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed

S&F in repair 25mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed

M&L for 75mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in water tank platform including necessary form work to side of concrete complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L for 10mm thick rendering in CM 1:3 on ceiling /concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for preparation on new plaster surface of ceiling & applying three coats of white wash complete all as specified and directed

M&L for preparation on new plaster surface of walls & applying three coats of white wash on walls complete all as specified and directed

M&L for preparation on new plaster surface of walls & applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

M&L for preparation on new plaster surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified and directed

Demolition and breaking up drain pipe 110mm bore salt glazed stone ware/AC/PVC pipe complete all as specified and directed

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and stack clamps as in rain water pipes complete all as specified and directed

S&F 110mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed

Dismantling of brick work or stone/boulder/PCC block masonary built in cement mortar of any specification and any position complete all as specified and directed

M&L for precast cement concrete block masonary with solid blocks made of PCC (1:3:6) type C-1 using 20mm graded stone aggregate exc 10cm in width and set in CM 1:6 complete all as specified and directed

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as sub base and foundation of concrete complete all as specified and directed

M&L for cement concrete 1: 2 :4 type B-2 (using 40mm graded stone aggregate) finished surface even and smooth without using extra cement complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in bedding layer to floor tiles complete all as specified and directed

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) finished surface even and smooth without using extra cement as in plinth protection complete all as specified and directed

Dismantling of mild steel work of any description complete all as specified and directed

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified.

M&L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

M&L for preparation of new steel surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of old steel surface of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Dismantling of plain or corrugated AC sheeting in roof coverings complete all as specified and directe

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls fixed with self tapping screws all as specified and directed

S&F pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls fixed with self tapping screws all as specified and directed

S&F mild steel flat iron as wind ties of grade Fe-290 Gde-E-165 or roof including drilling holes securing bolts etc and similar work complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed

M&L for glazed ceramic coloured joint free tiles of size (450x300 mm) x 7mm thick in dados skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles and laid, over and including 10mm thick plaster in CM 1:4 complete all as specified and directed

M&L for non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. laid, over and including 15mm thick screed bed in CM 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed

All as per item no 57 above but on skirting, dado laid, over and including 10mm thick cement plaster in CM 1:4 complete all as specified and directed

M&L for vitrified ceramic double charged dark shade tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm,(size of tile 600x600mm) each in floors etc. set and jointed in neat cement slurry, laid over and including 15mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match shade of tiles complete all as specified.

All as per item no 59 above but on skirting, dado laid over and including 10mm thick cement plaster in CM 1:4 complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick (size not less than 550x500mm ) including provided white marble border of 18-20 mm thick and 150mm set and jointed neat cement slurry over and including cement screed base 20mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing cutting, grinding and polishing mirror finish type complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick as in window cill skirting treads etc over cement screed base laid, over and including 15mm thick rendering in CM 1:4 and jointed neat cement slurry with grey cement slurry with pigment to match the shade of the slab including rubbing cutting, grinding and polishing mirror finish type complete all as specified and directed

M&L for 20mm thick granite (of any type) work (table rubbled and polished ) for urinal partion work fixed in wall jointed together two pieces with stone adhesive including chase pinning in wall edge grinding & polishing complete all as specified and directed

M&L for providing for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cills steps, coping and similar work including rounded or chamfered edge and including form work complete all as specified and directed

Taking down cement concrete plaster as in fin facia chajjas etc (other than ground floors) beam, staircase, landing and similar work complete all as specified and directed ( Note :- work shall be carried out up to 6.00 mtr height and including scaffolding as required.)

M & L for Dubbing out average 20mm thick in CM 1:4 on irregular face of old walls/ ceiling, fin facia chajjas etc complete all as specified and directed Note: The work shall be carried out up to 6.00 mtr height.

M&L for rendering 10mm thick in cement mortar (1:4) on concrete surface as on roof slab, fin facia, chajjas finished even and smooth without using extra cement mix with water proofing compound as per manufacturer's instruction complete all as specified and directed

S&F GI chicken wire mesh of 0.71 mm dia wire & 12mm mesh size fixed with nails & screws around RCC chajjas/facias etc complete all as specified and directed

S&F in repairs 15mm bore bib tap cast copper alloy, chromium plated, fancy type, crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repair vitreous china squatting pan (Orissa pattern) of size 580x440 mm white with integral foot rest complete all as specified and directed

S&F in repairs 10 Ltrs capacity PVC valve less, symphonic action type flushing cistern, low level, white, with inlet, ball valve float & handle complete all as directed

S&F in repairs 100 bore cast iron 'P' or 'S' trap with cement joint complete all as directed

S&F in repairs stainless steel grating doom of 100mm dia with / without central hole set over the existing nahani trap/ floor trap in neat cement & pointed to match the floor finished all as directed

S&F in repairs vitreous china wash hand basin size 550x400mm including vitreous china pedestal brackets & one No PTMT waste coupling 32 mm size, 15 mm bore a CP cast copper alloy, fancy type, pillar, tap quarter turn type complete flexible PVC waste pipe of suitable length all as directed at site

M&L for preparation on old plaster surface of walls & applying one coat of cement base paint complete all as specified and directed

S&F in repairs vitreous china urinal, half stall type including suitable size waste coupling and waste pipe complete all as specified and directed

S&F in repairs WC pedestal pattern wash down type (European type WC), white or coloured superior quality including plastic seat cover and making good to the disturbed surfaces complete all as directed

S&F in repairs 15mm bore cast copper alloy chromium plated angle valve quarter turn fancy type with flange plate complete all as specified and directed

S&F in repairs 15mm bore cast copper alloy chromium plated two way angle cock quarter turn fancy type with flange plate complete all as specified and directed

S&F in repair 15mm bore stop valve of cast copper alloy quarter turn type screwed down high pressure with crutch or butter fly handle fancy type chromium plated, with long shank and cup (concealed type ) complete all as directed

S&F in repair 15mm bore cast copper alloy chromium plated health faucet with 1.0 meter long CP flexible pipe complete all as directed

S&F in repairs stainless steel towel rail round 200mm dia with round flange of standard quality fixed with steel screw and PVC rawl plug complete all as specified and directed

S&F in repairs brass chromium plated shower rose fancy type with swivel joints including shower arm 15mm dia 195mm long with bend of 45 degree with flange of CP brass complete all as specified and directed

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in repair urinal spreader of PTMT any colour for fixing with 15mm dia pipe minimum weight 60gms complete all as specified and directed

S&F in repair PTMT jet spray for EWC with flexible pipe with PTMT nut & bolt complete all as specified and directed

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board /slabs/blanket any thickness including cover fillets complete all as specified and directed

M&L 12mm thick perforated /semi perforated particle board/tiles for insulation and acoustic purposes 60x60cm in size, fixed with staples on snap grid in ceiling complete all as specified and directed

S&F false ceiling anodised aluminium snap grid frame work for false ceiling, grid size 60cmx60cm with the following section for frame work:- (a) wall side angle 24x24x0.43mm (b) Main tee 24x34x0.35mm (c) cross tee 24x25x0.30mm having integral splices at both ends for interlocking complete with suitable hanging arrangement of metallic fasteners, holding cleats GI wire suspenders etc complete all as specified and directed

S&F in repair 12 mm thick Perforated particle board/ tiles for insulation and acoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples or on snap grid as in ceiling , complete all as specified and as directed.

S&F in repairs for 75mm dia PVC (SWR) floor trap plain including jointing with solvent cement Complete all as specified and directed

Dismantling of old broken runway sign board including frames/legs embedded in cement concrete and removing the same away from aircraft manoeuvring area not exceeding 3.50 Sqm each complete all as specified and directed.

Dismantling of old broken runway sign board carefully from frame/legs including taking out screws etc leaving the existing frame in position for refixing new sign board and removing the same away from aircraft manoeuvring area not exceeding 3.50 Sqm each complete all as specified and directed.

Excavation in post holes each n.exc 0.50 cum, getting out, returning, filling in layers not exceeding 25 cm thick including watering and ramming earth and removing surplus earth to a distance not exceeding 50 metres complete all as specified and directed.

S&F 4mm thick plain, unbreakable aluminium galvanised ACP sheet for runway sign board having high optical clarity, 100% UV protected face plate, having high impact strength UV resistance must meet 1000 hrs UV weathering test as per ASTM G53. The sheet to withstand high velocity winds, resist temperature varying from extreme cold environment to sweltering hot conditions having temperature resistant upto 50 degree Celsius to be fixed using cadmium plated screws on fibre frame jointed with aluminium cleat with high grade adhesive/staples on corners including superior quality radium coloured film high grade not affected from water & heat as a text matter( text matter shall be electronically cut) smoothly pasted on acrylic sheet with high grade adhesive including fixing 75 mm dia PVC pipe in the post hole with concrete and fixing sign boards in the pipe all as specified and directed. Note:- PVC pipe & concrete shall be measured and paid separately under item no. 98 & 99 respectively)

Supply and fix 75 mm dia PVC pipe (SWR) complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate as in foundation filling mass concrete of post complete all as specified and directed.

S&F framed work for sign boards using PVC fibre reinforced pipe of size 40x40x3mm constructing using aluminium angle cleat of size 40x40x5mm to reinforce the frame complete all as specified and directed.

S&F aluminium angle 25x25x1.5mm for bedding the frame at outer side complete including necessary screws complete all as specified and directed.

Demolition of cement concrete of any description exceeding 15cm thick as in floor/paving and removing the same upto 5.00Km or out side MD land complete all as specified and directed

M&L for coarse sand filling under floors or in foundation including watering and consolidation complete all as specified

M&L for 400 micron polythene film transparent (Non recycled laid over a sand layer with side and other lap shall not be less than 300mm etc complete all specified and directed

M&L for cement concrete work in pavement/hard standing of flexural strength 40kg per sq cm in field using 400 kgs of cement per cubing meter thickness of concrete 25cm or less complete all as specified and directed

supply only polyester triangular fibre 6x12 mm long with semicircle dia 30-35 micron designed for melting point 240 to 260 degree Celsius and having specific gravity of 1.34-1.40, 'Recron3S' manufactured by M/S Reliance industries Ltd or equivalent make and mixing @ 0.25% by weight of cement complete all as specified and directed

Finishing surface of concrete floors / hard standing by brooming complete all as specified.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as sub base and foundation of concrete complete all as specified and directed

M&L for forming construction joint 10mm wide and 30mm deep and filled with sealing compound Grade 'B'

M&L for forming contraction (dummy) joint 65mm deep and 10mm wide filled with sealing compound Grade 'B'

AMBEY MAA CONSTRUCTION COMPANY

M.D. CONSTRUCTION CO.

National Rewinding Works

M/S HARIOM CONSTRUCTION COMPANY

BABU LAL PARIHAR