SPECIAL REPAIRS TO BLDG NO B-01 OF DGQA RESIDENTIAL COMPLEX GHATKOPAR (W), MUMBAI

Amount

Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius, in half brick thick walls with old size bricks, built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge

Material and labour for providing Anti-termite Treatment with treating the top surface of filled earth chemical emulsion at the rate of 5 litre per square metre of surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing Anti-termite Treatment with treating soil along with internal wall perimeter with chemical emulsion at the rate of 2.25 litre per linear metre including drilling and plugging holes etc complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including tiles and removal of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for chequered cement concrete tiles 25cm x 25cm x 25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. Make- (a) M/S Mehatab Tiles, Indore (b) National Tiles(c) Bharat Tiles and Engg Coy, Bangalore (d) Modern Tiles and Marbles Bangalore (e) M/s NITCO, Mumbai (f) Ultra (g) Duracrete

Material and labour for 75mm thick Plain Cement Concrete 1:4:8 type D2, using 40mm graded stone aggregate as in sub base of flooring/ hard standing/path and finished even and fair without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for 75mm thick Plain Cement Concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in sub base of flooring/ hard standing/path and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for 75mm thick cement concrete (1:3:6) type C2, using 40mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including joints of plinth protection filled with bitumen mastic (1:3) complete all as specified and as directed by Engineer-in-Charge.

Taking down shutter carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each including all fittings etc & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge

Taking down of chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge

Taking down chowkats or frames with shutter (without taking off shutter from frame) exceeding 1.5 sqm but not exceeding 4 sqm each including fittings & removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed by Engineer-in-Charge

Taking down shutter carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each and refixing in the same opening complete all as specified and as directed by Engineer-in-Charge Note- Renewal of builder's hardware articles, if specially ordered, shall be paid seperately.

Supply & Fix Factory made single extruded WPC (wood polymer composite) soild door/window/ceosetory windows & other frames/chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with minter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(face) and 1100 N(edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with properrty of being termite/borer proof water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/ SS dash fastners of required dia and length complete all as specified as directed by Engineer-in-charge. Note: 1: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 2. M/S hold fast or SS dash fastners shall be paid for seprately. Make: Rajashri/Giza/Echon/Floresta

Supply and fix mild steel work as in hold fast & similar small articles, conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

Supply and fix plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good in cement concrete in frame complete all as specified and as directed by Engineer-in-Charge.

Supply and fix factory made plain framed panelled shutter 35mm thick 2nd class hardwood rail and style (three panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply & Fix Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Make: Rajashri/Giza/Echon/Floresta

Supply and fix 35mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix 35mm thick factory made 2nd class hard sal wood glazed and skelton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (b) complete all as specified and as directed by Engineer-in-Charge. Make : M/S Goel Brothers, Raipur/ M/S Pioneer Timber, Chandigarh/ M/S Goyal Industries, New Delhi/ M/S Jain Doors Pvt Ltd, Haryana/ M/S India Wood & Wood P Ltd Mangalore/ M/S MP Wood Products, Indore

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 151 & 180 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’ /M/s Mica Plastiwood(Make :Maica)

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 149 & 176 of SSR Part II (pertaining to item No 08080) including necessary aluminium builders hardware for one door to be provided such as 100mm dia butt hinges - 3Nos, tower bolt 200mm dia - 2Nos, handle 200mm long - 2 Nos etc complete all as specified and as directed by Engineer-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’ M/s Mica Plastiwood(Make :Maica)

Material and labour for block board for cup board, grade 2 quality, 18/19mm thick, interior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber frame including taking down existing etc complete all as specified and as directed by Engineer-in-Charge. Make: Bajaj Boards/ NU Wood / A-1 Boards/ Bhutan Board/ Charminar/ Kitply/ Green Ply

Supply and fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring 150mm size, fixed in floor, complete all as specified and as directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix Stainless steel butt hinges medium weight of size 100mm all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix Hasp and staple, safety type, aluminium anodised including bolt to hinge plate of size 75mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix 15 micron coloured powder coated aluminium sections for sliding (3 Track) or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Supply and fix 15 micron coloured aluminium anodised grill of design No DG-101 of Decogrille or equivalent , cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLE of Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE

Supply and fix 4.0mm thick glass, ordinary quality, in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix 4.0mm thick figured glass, pin headed type, ordinary quality, fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge

Material and labour for preparing new wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd

Supply and fix in repairs aluminium anodised 25mm dia curtain rail fixing including provision of pair of brackets, stops, rollers etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for non skid coloured ceramic tiles (Joint free) , 7 to 8mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 20mm thick in Cement Mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles/ Orient bell

Material and labour for glazed coloured ceramic tiles, 1st quality of size 350 x 250 x 7 mm thick or 450 x 350 x 7mm thick (or nearest size) on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick backing coat in Cement Mortar (1:4) etc complete all as specified and as directed by Engineer-in-Charge Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles/ Orient bell

Material and labour for non skid coloured ceramic tiles (Joint free) of size 600 x 600 mm, 7 to 8mm thick, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 20mm thick in Cement Mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles/ Orient bell

Material and labour for coloured ceramic tiles, 1st quality, on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick backing coat in Cement Mortar (1:4) etc complete all as specified and as directed by Engineer-in-Charge Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles/ Orient bell

Demolition of stone slab and tiles of any description or thickness in floor, apron and vertical surfaces, laid bedded and pointed in any mortar and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for granite (of any type) , 20mm thick, machine cut (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of mushroom granite stone including edge moulding to 18 mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc, over and including 15mm thick cement mortar (1:4) complete all as specified and as directed.

Material and labour for Green marble work 18 to 20 mm thick machine cut, table rubbed and polished, bedded and jointed as in steps, jambs, pillar, window cills, cooking platform and like bedded and jointed with grey cement slurry and pointing in white cement 1:2 using marble dust with admixture of pigment to match including 20mm thick screed bed/rendering coat in cement mortar 1:4 etc and providing edge moulding including machine polishing to edge to give high gloss finish complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for 10 mm thick plastering in cement mortar (1:6) on brick/concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 5mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15 mm thick on concrete / brick masonry surfaces in two coats (10+5mm), 10mm thick in Cement mortar 1:4 and 5mm thick in Cement mortar 1:4 mixed with water proofing compound and finished even and smooth without using extra cement, upto the height of bldg roof including necessary formwork/ scaffolding /ladders and safety belt etc complete all as specified and as directed by Engineer-in-Charge. Note: water proofing compound shall be measured separately

Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India

Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit

Material and labour for complete removal of existing treatment on wall surfaces and applying two coats of distemper oil emulsion with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge Make: M/s SHALIMAR / M/s BERGER / M/s NEROLAC /M/s ASIAN (Tractor Brand)

Material and labour for preparation of old plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of undecorated wall/ceiling surfaces and applying 1.5mm wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Material and labour for old plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India

Supply and fix in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc including health faucet (body cleaner) with 1.0m tube and hook (PVC tube) and toilet paper holder with flap guard complete all as specified and directed by Engineer-in-Charge. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) all as specified and as directed by Engineer-in-Charge. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, including flush pipe of polyethylene of low or high density or PVC 32mm dia including connection to pipe and fixing of chains and pull or lever complete all as specified and as directed. Make : M/S Johnson Peddar/ Parryware/ RAK Ceramics/ CERA

Supply and fix in repairs vitreous china wash hand basin white flat back or angle back of size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including CI brackets, cutting for and pinning in ends of brackets or erecting stand including 32mm bore discharge pipe with waste coupling of PTMT etc complete all as specified and as directed. Make : CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT)

Supply and fix in repairs pillar taps, fancy typ, cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply and fix in repairs concealed stop valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply and fix in repairs Soap dish, vitreous China, white, approximate size 160 x 160 x 90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engineer-in-Charge. Make : CERA/ RAK Ceramics/ Parryware/ Jaquar/ Hindware/ Johnson/ Kajaria (KEROVIT)

Supply and fix in repairs tubular towel rail aluminium anodised 20mm dia, 'D' type, 60cm long between flanges fixed to walls with screws complete all as specified and as directed by Engineer-in-Charge.

Supply and fix stainless steel kitchen plate rack of size 780mmx 900mm x 250mm of approved pattern, made out 0.56mm thick sheet with 8mm dia rods including fixing with rawl plug screws complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply and fix in repairs CI floor trap 100mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge. Make : Electro-Steel/ Kejriwal/ NECO/ Kesoram

Supply and fix in repairs CI nahani trap 100mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge. Make : NECO/Sighal iron Foundry/Bengal iron Co/Dhatu Udyog/Kapilansh

Material and labour for 15mm thick rendering in cement mortar (1:3) SUNKAN floor including with water proofing compound in sunken floor including vertical surfaces upto 450mm height including applying a coat of Raincoat solution of make Dr Fixit or equivalent with uniform surfaces and supply and fix vitreous china squatting pan Orissa pattern pan of size 580 x 440mm white with integral foot rest, 'P' trap and connecting to flushing pipe, anti syphonage pipe etc (excluding flushing cistern) and connecting piece of CI pipe as per required upto T/Y joint including filling PCC 1:4:8 type D2 and over 40mm thick PCC 1:2:4, type B0 for floor with uniform surfaces and GI spout, medium grade with 50mm dia to provide that 450mm long to be extended from front surface of wall all as specified and as directed.

Supply and fix in repairs, sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever CI brackets and connecting union to pipe overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste pipe etc complete all as specified and as directed by Engineer-in-Charge. Make : Diamond / Nirali / Neelkant/Parryware/Prayag/M/s Jain Enterprises(Brand name :Jaynam)

Supply & Fix of 04 pieces pully operated cloths drying system casting of aluminium pipe of length 2.5 mtr outer dia. 22mm and internal dia. 19.8mm and channel pair with pulley made up of devil mounted and fixed with self tappimg screw. Rope will be HDPE double core of 4mm with rope guide at rope locking system to hide rope. weight of pipe shall not be less than 2kg/rmt and weight of rope not less than 550 gms/mtr with all accessories and making good the disturbed portion/surfaces if any while fixing drying unit complete all as specified and as directed.

Supply and fix in repair Swivel Shower of PTMT, 125mm, any colour for fixing with 15 mm pipe (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge. Make : Prayag / R.S. Industries (POLYTUF)

Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix in repairs rotational molded polyethylene water storage tanks 1000 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra

Supply and fix in repairs rotational molded polyethylene water storage tanks 2000 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra

Supply and fix in repairs gun metal gate valve, 20mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/GEM

Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 20mm bore (Minimum weight - 210 gms) complete all as specified and as directed by Engineer-in-Charge Make- Jaypee /GMP / Neta/ Zolota/Prayag Polymer/ Symet

Demolition of reinforced cement concrete of any description in any position (reinforcement cut as required to facilitate demolition) as in manhole cover and simillar and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge.

Supply and fix mild steel TMT bars, 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel TMT bars, 6 to 8mm, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Material & labour for repairing of damaged concrete portion by using superfluid dual shrinkage compensated structural grade M-40 micro concrete of at all levels with all leads and lift as directed including mixing, laying, levelling, finishing and curing complete all as specified and directed by Engineer-in-Charge. Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved .

Supply & fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour but excludeing the materials for grouting the pins etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing and applying rust cleaner of approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc complete as directed by Engineer-In-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika

Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer's instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note: (a) New Reinforcement shall be measured and paid separately under respective item. (b) Cost of welding deemed to be inclusive in this item of work.

Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforming to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing base and curing agent 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note-Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge

Material and labour for formwork using steel shutters or 12mm marine ply to have the smooth finish to pour the micro concrete/ concrete including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge.

Repairing the damaged concrete portion by average 20 mm thick polymer plaster @ a dose of 5% in ratio 1:3 (C:M) over the exposed non structural member surface including making the surface evenly smooth etc as per manufacturer's instruction. (Measurement on the basis of finished area). Note for Item No.87 to 93:- (i) The work under Item No. 87 to 93 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above. (iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority.

Material and labour for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, holstring courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, kerbs, water troughs, bed plates, concrete block for hold fast etc and the like including necessary form work for fair finished surfaces including weathering, slightly rounded or chamfered angles and throating, as directed etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for surface preparation of structural part by gentle chipping by manually to make the surface rough and thoroughly cleaned with air as per standard practice and directions of Engineer-in-charge (including removal of external plaster, wherever exists) including transportation, labour, conveying debris away from the site (50 m max.), tools and tackles, lead and lift etc.complete all as specified and as directed by Engineer-in-Charge.

Demolition of existing water proofing treatment including cement concrete / cement lime concrete / mud faska (unreinforced in roof and terrace other than ground floor) any description upto the slab top, any thickness and removal of rubbish outside MD land etc complete all as specified and as per directed by Engineer-in-Charge.

Material and labour for providing plain cement concrete 1:2:4, type B0 using 12.5mm graded stone aggregates mixed with water proofing compound at the rate of 2% by weight of cement as in levelling course, haunching, coping, and similar work, over RCC roof surface and RCC over head tank top surface including rounded or chamfered on edges and formwork etc, laid in slope as required, finished even and fair etc complete all as specified and as directed by Engineer-in-Charge. Note: Water proofing compound will be measured and paid separately

Material and labour for 15mm thick rendering on concrete surfaces of roof slab, mixed with water proofing compound, in CM 1:3 finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note: Water proofing compound will be measured and paid separately

Material and labour for APP modified waterproofing treatment over existing RCC roof slab with following specification including brushing off the surface to receive the treatment obtain the required surface complete as directed by Engineer-in-Charge :- (a) Applying oil bound bituminous primer @ 0.4lit/Sqm of density 0.87-0.89Kg/lit of 250C on the prepared dry roof surface. (b) Laying 4mm thick APP membrane weight not less than 3.90 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. (c) Over the membrane provide 20mm thick screed bed in cement mortar 1:4 mixed water proofing compound at the rate of 2% by weight of cement. (d) Provision of 250x250x22mm thick machine pressed cement concete tiles with minimum thicknes of joint (not exc.3mm) are thoroughly filled with water proof polymer based joint mortar. Make of APP :STP Ltd/Texsa India Ltd/IWL Ltd/TIKIDAN Make of tile :M/S Mehatab Tiles, Indore/National Tiles/Bharat Tiles and Engg Coy, Bangalore/Modern Tiles and Marbles Bangalore/M/s NITCO, Mumbai/Ultra/Duracrete Note : (i) The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. (ii) Water proofing compound will be measured and paid separately (iii) Quoted rate includes the disconnection existing tanks of any litres capacity including all fittings, setting aside (for lowering if reqd) for roof treatment & reconnecting and refixing in position including all fittings complete all as directed.

Dismantling of 110mm dia Cast iron/PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge

Dismantling of 75mm dia Cast iron/PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge

Supply and fix PVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.. Make: Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.. Make: Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) bends any radius, 110mm bore complete all as specified and as directed by Engineer-in-Charge Make :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) branch piece, single (single Y) equal or unequal of any radius 110mm bore with access door etc complete all as specified and as directed. Make :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) branch piece, double (double Y) equal or unequal of any radius 75mm bore with access door etc complete all as specified and as directed. Make :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for taking down exhaust fan / Ceiling fan by disconnecting electric connection, dismantling blades, down rod of any sweep, 230 volts, AC, single phase, cleaning of parts and removing dust etc, and refixing with suitable size copper connecting wire etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for point wiring concelead type with proper colour coding complete with and including PVC insulated unsheathed, flexible bright annealed multi stranded copper conductor single core FRLS cable 1.5 Sqmm (22/0.30) 1100 volt grade confirming to IS 694 drawn through in and including (medium grade) rigid non metallic PVC conduit pipe 25 mm size ISI marked with conduit accessories / fittings / junction box / inspection covers etc of ISI marked and cutting chases for concealed conduit with all surfaces by means of screws and sunk / cup washers, with Modular metal flush box including white cover plate with frame for mounting of switches sockets fan regulators etc including 1.5 sqmm (22/0.30) 1100 volts grade PVC insulated FRLS unsheathed flexible, multi stranded copper conductor cable (green colour) as continuous earthwire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end for one light / Fan / Exhaust fan point controlled by one, one way switch all as specified and as directed Make of Cable-Plaza, Finolex, Havells, Polycab Make of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme

All as per item No. 109 here-in-before but for one 5 pin 5/6 Amps socket outlet point on independent board

All as per item No. 109 here-in-before but for one 5 pin 5/6 Amps socket outlet point on the same board with other switches controlled by one switch.

All as per item No. 109 here-in-before but for one bell/buzzer point controlled by one, one way switch

All as per item No.109 here-in before but for one light point controlled by 2, two way switches

All as per item No. 109 described here - in - before but for 3 pin 15/16 Amps socket outlet on independent board with 2.5sqmm copper cable single core and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

Supply and fix Modular type switch, single pole, one way, 6 Amps, 1 module, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make:Anchor / Legrand / Havells/.Crabtree/Leader

Supply and fix Modular type switch, single pole, two way, 6 Amps, 1 module, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make:Anchor / Legrand / Havells/.Crabtree/Leader

Supply and fix Modular type bell push, single pole, one way, 6 Amps, 1 module, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make:Anchor / Legrand / Havells/.Crabtree/Leader

Supply and fix Call bell electric (Ding Dong type) suitable for working on 230 volts AC supply multi music type complete all as specified and as directed. Make: Anchor / Legrand / Havells/.Crabtree/Leader

Supply and fix ceiling rose, 3 plate, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make: Legrand /crabtree/ Honeywell/ Anchor

Supply and fix Modular socket, 1 module, 5 Pin, 5 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader

Supply and fix Modular type switch, single pole, one way, 16 Amps, 1 module, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make:Anchor / Legrand / Havells/.Crabtree/Leader

Supply and fix Modular socket, 2 module, 5 in 1, 3 Pin, 5 & 16 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader

Supply and fix modular fan regulator AC, 230 volts , 100 watts (2 module), electronic type, deluxe (stepped type) complete all as specified and as directed by Engineer-in-Charge. Make: legand/havells/crabtree/Havells/SSK

Supply and fix angle holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply & Fix in repairs Extruded Aluminium batten 6500K, 1x 22 watts, 240 volt, 50 HZ, 4 feet LED tube light fitting, batten type with with slim & sleek looks all pre-wired fixed on walls with all fixing accessories such as 2 nos of PVC square/round boxes, screws, clips etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm ccomplete all as specified and as directed by Engineer-in-Charge. Make: Philips Cat Part No: BN021CLED22SPSUCWGR or equivalent in Crompton Greaves /Havells/ Bajaj

Supply & Fix in repairs Extruded Aluminium batten 6500K, 1x 12 watts, 240 volt, 50 HZ, 2 feet LED tube light fitting, batten type with with slim & sleek looks all pre-wired fixed on walls with all fixing accessories such as 2 nos of pvc square/round boxes, screws, clips etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engineer-in-Charge. Make- Philips Cat Part No: BN 021 LED12S 6500 PSU GR or equivalent in Crompton Greaves /Havells/ Bajaj

Supply & Fix in repairs decorative wall mounting fitting, in durable plastic body & designer mesh in gold finish suitable for 9 W LED lamp working on 240 volts, 50 hz AC with LED bulb of capacity 9 watt including all necessary fittings complete all as specified and directed by Engineer-in-Charge. Make for fitting: Havells cat part No LHFOECE1TZB014 or equivalent in Crompton Greaves /Philips/ Bajaj

Supply and fix in repairs sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar, single pole and neutral , fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Make: Havells / Legrand / L&T

Supply and fix in repairs MCB SPN 32 Amps, 240 volts, 10KA 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make :Legrand / L&T / Havells/Benlo

Supply and fix in repairs MCB SP 6-32 Amps, 240 volts, 10KA 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make :Legrand / L&T / Havells/Benlo

Supply & fix in repairs LED light fitting 10W bulkhead luminaires outdoor type including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including all necessary fittings complete all as specified and directed by Engineer-in-Charge. Make: Havells/Crompton Greaves /Philips/ Bajaj

Material and labour for submain wiring in concealed complete with and including 2 runs of 6sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including suitable size of PVC conduit, medium grade with accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and one run of 6.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 6sqmm PVC insulated cable and one run of 6sqmm cable and one run of PVC conduit shall be measured as one unit length. Make of Cable-Anchor/ havells/finolex /Polycab/Plaza of ISI mark as approved by GE Make of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 63,502.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

RAJU ENTERPRISES (BID ID -3329581)

Vishal Builders (BID ID -3329259)

MAHESH ENTERPRISES (BID ID -3328888)

dimalsonsdecorator (BID ID -3337281)

Gulshan Construction (BID ID -3329524)