Fog Spray of V3 Road ie Sukhna Path between Sector 20 30 and Sarovar Path between Sector 18 19 UT Chandigarh

Providing and laying tack coat with bitumen VG-10 @ 3.00 kg/10 sqm using sprayer pump on prepared surface heating bitumen in boiler and spraying bitumen with spray set fitted on bitumen boiler including cleaning of road surface with complete in all respect as per MORT&H specification and to the entire satisfaction of the Engineer-in-charge.

Providing and laying type - 2 (4mm to 6mm) 5 mm Avg. Thick SLURRY SEAL with mechanical paver after mixing aggregate and bitumen as per design mix in hot mix plant using 10 % Straight run bitumen of VG-30 @ 10kg/sqm penetration and using fine aggregate with 2% filler to the weight of aggregate confirming to relevant specification laid in MORT&H specification and density of slurry seal concrete as laid 1.71 Gm/c.c.complete in all respect and to the entire satisfaction of the Engineer-in-charge.

Providing and laying Slurry Seal (type - 1) (2to 3mm) consusting of a mixture of fine aggrergates, 1.5% portland cement filler, bituminous emulsion @15 % and water on a road surgace inculing cleaning of surface, mixing of slurry seal in a sutiable mobile plant.confirming to relevant specification laid in MORT&H specification in all respect and to the entire satisfaction of the Engineer-in-charge.

Providing and applying Fog spray with slow setting bitumen emulsion @ 1Ltr/Sqm for rejuvenate the binder content (USE SS-1 grade bitumen) in an existing bituminous surfacing to the entire satisfaction of the Engineer-in-charge

Providing and applying 2.5mm (minimum) thick thermoplastic road marking paint for edge line, central line, stop line, segregation line, zebra crossing, arrows and other road signs etc. The thermoplastic material should be homogeneously composed of pigment, hot resin and glass reflectorising beads @0.250 Kg/Sqm. The gradation of glass beads must be as per table 800.4 and properties of material should be as per table 800.3 of MORT&H specification (5th revision). The work should be complete in all respects and to the entire satisfaction of Engineer-in-charge.

Providing and fixing of Raised pavement markers (Cat eyes) of make 3m series/ Avery Denninson 80/C-80 conforming to ASTM D4280 type H with micro prismatic lens on both sides with 13 sq cum retro-reflective surface area in each lens, having two no. 3cm shanks and fixing the same with suitable epoxy after cutting the road surface for embedding shanks complete in all respects and to the entire satisfaction of the Engineer in charge. N.S.

Providing and fixing dual- directional dielinator made out of 16gauge M.S. rectangular pipe of size 25x68mm and of length 750mm. Pipe funished with deluxe multi surface paint two or more coate. Head made out of ABS plastic rectangular moulded with flat face provided with High intensity prismatick reflectors of colour (white/yellow /red) of size 100x125mm with additional 2 reflective strips of 25mm wide Embedded in CC 1:2:4 of bock size of 9" x9" x 12" complete in all respect to the entire satisfaction of Engineer-in-charge.