IS EQUAL LEG ANGLE 65x65x10mm. IS.808/2021&IS.2062 (Pt.-1):2025,Grade Designation E 250,Quality`A'

Special Eligibility Criteria

1. 1

   Manufacturer's test certificate should be submitted along with the supply

   Confirmation required
2. 2

   Railways reserves the right to place bulk/regular orders on the lowest responsive bidder meeting any one of the following eligibility conditions, subject to compliance with all applicable statutory requirements: A. The bidder shall possess a valid BIS licence covering IS 2062 (Part 1):2025 for the required grade/type of structural steel and shall furnish a copy of the valid BIS licence along with the offer. The IS Equal Leg Angle shall conform to the applicable requirements of IS 808:2021. OR B. The bidder shall be an authorised dealer of a manufacturer holding a valid BIS licence covering IS 2062 (Part 1):2025. The bidder shall furnish the manufacturer's valid BIS licence and valid authorisation/dealership certificate along with the offer. A general authorisation/dealership certificate shall also be acceptable, provided it clearly indicates its validity and is valid as on the date of tender opening. OR C. The bidder should have satisfactory past performance in supply of IS Equal Leg Angles of any size for a quantity equivalent to 20% or more of the tendered quantity against a single contract, during the last five financial years and the current financial year, prior to and excluding the date of tender opening, to this Railway or any other Zonal Railway/Production Unit. Such bidder may be considered for placement of bulk/regular order, subject to satisfactory assessment of capacity and capability.Documentary evidence, such as R/Notes, RITES Inspection Certificates, complied Purchase Orders (POs) shall be furnished along with the offer as evidence of satisfactory execution of such Purchase Orders. .

   Document optionalConfirmation required
3. 3

   Every steel and steel product covered under the applicable Steel and Steel Products (Quality Control) Order, as amended from time to time, shall conform to the relevant Indian Standard and shall be accompanied with a Test Certificate bearing the BIS Standard Mark, issued by a BIS-certified manufacturer, with each consignment, wherever applicable.

   Confirmation required

Check List

1. 1

   The bidder agrees to supply the tendered stores at the rate quoted by him in accordance with the Terms & Conditions of this tender and Tender conditions available under mentioned link.
2. 2

   The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance , and such terms quoted anywhere else should be ignored. [Denial of this condition not recommended]
3. 3

   If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise(in percent of order value ) with further breakup of MSE owned by SC/ST. (Information will be provided in % terms with 6 fileds; Micro owned by SC, Micro owned by ST, Micro owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others)
4. 4

   Have you purchased bid documents.
5. 5

   Have you quoted in the prescribed proforma.
6. 6

   Have you furnished the statement of deviations.[preferably nil]
7. 7

   Have you quoted price on the basis of free delivery to destination, indicating the break up.
8. 8

   Have you quoted delivery period correctly and precisely.
9. 9

   Have you kept your offer valid for 90 days.[validity of 120 days is required for items of Machinery and Plants]
10. 10

    Have you submitted authenticated copy of the document authorizing the signatory to submit offer and commit on behalf of tenderers.
11. 11

    Tenderers to acknowledge having read and also accept the Tender Conditions for Electronic Tenders as available at Southern Railway Stores Tender conditions available under mentioned link.
12. 12

    Have you attached any performance statements with your offer? For proof of supply to other railways / production units copy of Purchase Order, Inspection certificate and receipt note / certificate must be uploaded. Non-submission of such vital documents may be taken as their not having any such past performance.
13. 13

    Please check our website before submitting offer, whether any corrigendum to the tender has been issued or not.
14. 14

    ALL THE BIDDERS / TENDERERS SHOULD ENSURE THAT THEY ARE GST COMPLIANT AND THIER QUOTED TAX STRUCTURE / RATES ARE AS PER GST LAW.
15. 15

    IN CASE THE SUCCESSFUL TENDERERS IS NOT LIABLE TO BE REGISTERED UNDER CGST/GST/UTGST/ SGST ACT. THE RAILWAY SHALL DEDUCT THE APPLICABLE GST FROM HIM / THIER BILLS UNDER REVERSE CHARGE MECHANISM (RCM) AND DEPOSIT THE SAME TO THE CONCERNED TAX AUTHORITY.

Commercial-Compliance

1. 1

   In case of road delivery, the date of delivery at destination [consignee's end] shall only be treated as delivery date irrespective of F.O.R. / F.O.T. condition mentioned elsewhere in the contract / tender.

   Confirmation required
2. 2

   1 ) Please refer Para. 14.0 Part-A of SR Tender condition 2) Goods and Service Tax (GST): Pursuant to the notification of GST Act 2017, the rate of GST as applicable to the tendered item should be correctly quoted by the tenderer, duly mentioning the HSN code. a) All the contractors/tenderers should ensure that they are GST compliant and their quoted tax structure /rates are as per GST Law. b) Bidders must be registered under GST Act and Rules. They shall invariably quote their GSTIN registration details without fail in their offer. c) In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the Railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned tax authority. d) The offers shall be evaluated based on the GST rate as quoted by each contractor and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the contractor to ensure that they quote correct GST rate and HSN number. e) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the contractor. f) The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers (Designation, address & email id). In case of a contract award, a copy of the LOA/Purchase Order shall be immediately forwarded by Purchaser to the Jurisdictional Assessing Officer mentioned in the Tenderer%u2019s bid.

   Confirmation required
3. 3

   Unloading of the material at the consignee end should be done by the Consignee only.

   Confirmation required
4. 4

   Failure consequences: In the event the firm fails to execute the contract within the stipulated delivery period, the Purchaser shall be entitled to impose liquidated damages for any extension of the delivery period. Further, if the supplier, for any reason, fails to deliver the goods in whole or in part in accordance with the contractual terms and conditions (as amended from time to time), the Purchaser reserves the right to recover damages from the supplier, not as a penalty, but by way of compensation, equivalent to the value of the security deposit for the entire contract . Such damages shall be treated as outstanding recoveries against the vendor and shall be dealt with accordingly

   Confirmation required
5. 5

   It will not be obligatory on the part of Tender Committee/Accepting Authority scrutinize beyond the submitted document of tenderer as far as his qualification for the tender is considered.

   Document optionalConfirmation required
6. 6

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that no other concerns or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage.