Construction of Anganwadi Building Centre No. 108at Arunachalam Street in ward non. 75 of West Zone.

Amount

Earth work excavation and depositing on bank within initial lead of 10M and initial lift of 2 metre in hard stiff clay stiff black hard red earth shales murums, gravel stoney earth and earth mixed with small size boulders and hard gravelly soil, etc., complete complying with standard specification.

Well Gravel filling for foundation and basement including cost and conveyance of all materials and labour charges etc. complete.

PLAIN CEMENT CONCRETE 1:4:8 (One cement, four sand and eight aggregate) using 40mm gauge hand broken hard granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification.

Supplying and erecting SHUTTTERING including necessary supports for plane surfaces such as RCC COLUMN FOOTING, PLINTH BEAM STAIRCASE STEPS etc., in all floors using mild steel sheets of size 90cm * 60Cm and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarina props at suitable intervals etc., complete complying with standard specfication and as directed.

Supplying and erecting CENTERING for sides and soiffts including supports and strutting upto 3.29m high for plane surfaces such as RECTANGULAR COLUMNS, top and bottom slabs of boxing, sill slabs, sunshades etc., in all floors using mild steel sheets of size 90cm * 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over countrywood joists of size 10cm * 6.5cm spaced at about 90cm centre to centre and supported by Casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete as directed.

Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOCKS. STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm * 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over countrywood joists of size 10cm * 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed.

R.C.C. 1:1.5:3 Mix (One cement one point sand Three hard broken granite stones) for all the reinforced cement concrete works using 20mm gauge hard blue granite stone jelly including cost and conveyance of all materials to site including all labour charges for concrete mixing, laying, watering curing properly excluding cost of steel and centering etc., complete complying with standard specification.

Supply fabrication and placing imposition of mild steel for steel rod of various sizes as directed including all labour charges for cutting and binding and tying with cost of binding wire, etc., complete as per standard specification.

Fly ash Brick work in CM 1:5 (one cement & five sand) using size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Ceiling Plastering with C.M. 1:3 Mix (one cement and three sand) 12mm thick finishing including cost and conveyance of all materials to site and all labour charges, watering curing and all other incidental charges etc., complete complying with standard specification.

Plastering with C.M. 1:5 Mix (one cement and five sand) 12mm thick finishing including cost and conveyance of all materials to site and all labour charges, watering curing and all other incidental charges etc., complete complying with standard specification.

Plastering with C.M. 1:5 Mix (one cement and five sand) 20mm thick finishing including cost and conveyance of all materials to site and all labour charges, watering curing and all other incidental charges etc., complete complying with standard specification.

Paving the floor with Vitrified Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toilet, balcony & utility area applied 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification.

Supplying and fixing of colour Wash Hand Basin of size 550mm x 400mm with all accessories such as cast iron Brackets,32mm Dia CP Waste coupling ,rubber plug and Chain,32mmDia B Class GI waste pipe ,15mm Dia G M Wheel Valve ,15mm Dia Nylon Connection , 15mm Dia Bress Nipples,15mm cp ,Piller tap Etc.(colour with Pedastal)

Flooring with Ellis pattern using 6mm chips (No sand to be used) as per standard specification etc., complete as directed by the departmental officers.

Supply and fixing of mild steel door, windows grills etc using all round "L" angle 25 X 25 X 6mm thick, cross bracing 20 X 6mm M.S.Flat with necessary locking arrangements including cost and conveyance etc., complete

Paintinting two coats for new Iron work including one coat of priming coat and using the best quality Iron primer and best quality synthetic enamel paint etc complete complying with standard specification

Painting with plastic emulsion paint two coats using best quality and aproved colour of conforming to ISI specification etc., complete complying as directed by the departmental officers as per standard specification.

Earth work excavation and refilling for pipe laying works up to 1.0m depth

Supplying of PVC pipes and specials

PVC pipe of 90mm dia of 6 Kg/cm2

PVC TEE

PVC bend

Lowering PVC pipes and specials to (for depth upto 2.0m) trench and laying to propergrade and alignment jointing with PVC couplers with cement paste and testing to the required pressure including conveyance of water filling during testing.

Supply and fixing TNEB Metre Board suitable for 3 Phases 100A service connection made up of suitable angle frame work of size 2 feet x 1.50 feet using angle iron of size 1.50x1.50x1.25 feet fixed on wall covered with hylem sheet of size 2 feet x 1.25 feet of 12mm thickness with nessary bolts and nuts supports and supply and fixing of 3 Nos 100A fues units (500 V 2 No Netural Copper earth flat of size 1"x1/4" with inter connection of EB metre to fuse units by 7/16 PVC copper wire with earth connection completed(SD 130)

Supplying and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1 no 32Amps of MCB as incoming and 6 Nos 6 Amps to 32Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only.The MCB DB and MCBs should be isi mark(SD 167)

Supply and fixing of 3 Phase 4 wire 4 way ICDB of 32Amps per way 63Amps TPN MC switch with suitable MS cable entry boxes trunking box and internal connection on suitable angle irone frame work with earth connection only (SD 176)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End SD 279

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End SD 308.

Supply and run of 2 of 4 sq.m (56/0.3)PVC insulated SC unsheathed CU.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting suitable colour.(SD 44)

Supply and run of 2 of 6 Sq.mm (84/0.3) PVC insulated SC Unsheathed CU.Condutor of 1100V on 7/20 GI bearer Wire for service connection Mains (SD 66)

Supply and run of 1 of NO 8 SWG GI wire for earth connectioin(SD 74)

Supply and fixing of WT bulk head fitting with guard (Phillips/Bajaj/Crompton/K.Lite) Suitable for incandescent lamp with 100W Bulb (SD 84)

Supply and fixing of single box type 4' 40W flu fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube (SD 89)

Supplying and fixing 440W Twin street light flu.fitting complete with copper chokes and condenspr 32mm dia GI pipe (class b)with 1 No 32mm GI Bend complete on the existing post wall 16A Fuse unit on MS Plate with PVC unsheathed Copper leads MS clamps and Aluminium painting Flu.tubes(SD 95)

Supplying and fixing of 1200mm(48")sweep AC ceiling fan complete with stepped electronic 300W Regulator with 1 metre down rod with fan clamp with side plates and crpss arm of size 450mm(16") (SD 106)

Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall (SD 116)

Supplying and fixing of 15 A aerial fuse unit (500A)on suitable 100x100 mm TW concealed box with hylem sheet on the tapping pole with necessary clamps.(SD 128)

Earthing as per the ISI specification with an earth electrode of 2.1mt class B GI pipe of dia not less then 40mm with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonery work and with 38mm RCC cover slab for the brick masonry (SD 233)

Supplying and fixing of HDPE Water Tanks as per IS 12701/1996 including loading, unloading, transportation and labour charges and fixing of pipes and specials for pipe connection works as per direction of the departmental officers etc., complete

Supply and Fixing of Wooden Door with frame of an approved wood including all cost etc completed as directed.

JAYALAKSHMI BUKDERS (BID ID -1248634)