Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.9 LQualified OPP PANCHALI HOTEL PUNE MAHARASHTRA 411005 INDIA | PUNE | MAHARASHTRA | 411005 | L1 | Qualified MII | |
| 2 | L2₹4.2 L+₹23,100 (5.86%)Qualified | L2 | Qualified MII | |
| 3 | L3₹4.4 L+₹43,550 (11.1%)Qualified | L3 | Qualified MII | |
| 4 | L4₹4.5 L+₹50,900 (12.9%)Qualified 10 RAMTEKDI ROAD PUNE 411 013 | PUNE | PUNE | MAHARASHTRA | 411013 | L4 | Qualified MSE, MII, Category: General |
Tender Value
Refer Docs
EMD Value
Exempted
Closing Date
28 Feb 2022, 4:00 pmClosed
Almirah Large Steel with locker FD/E6/MAP/18
Bed Hard Plywood Top FD/E6/MAP/08 (R)
Book Case Small FD-237
Chair Varandah FD-256
Chair Writing FD/E6/MAP/12
Rack shoe steel FD/E6/MAP/02
Sofa Set 5 seater with cushion FD-273
Table Bed Side FD/E6/MAP/15
Table Centre FD/274
Table dressing ladies with stool FD/E6/MAP-II/07
3164264
GEM/2022/B/1963376
Almirah Large Steel with locker FD/E6/ MAP/18,Bed Hard Plywood Top FD/E6/ MAP/08 (R),Book Case Smal
30 days
Maharashtra; Thane
Total value wise evaluation
BOQ
3 documents required · 3 mandatory
1 yrs
₹2 L
Exempted
28 Feb 2022
18 Feb 2022
28 Feb 2022
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | Almirah Large Steel with locker FD/E6/ MAP/18 | Overall size of almirah steel is 1900 mm high, 910 mm wide and 490 mm deep.
Description: The MS sheet use for making sides, front, drawers, partitions, base and shelves of the almirah shall be of 20 gauge exepct the back which shall be of 22 guage. Three shelves shall be fixed and an equidistant position as shown in the drg. The locker shall be provided with safety handle and lock. Lock shall be provide of make Godrej/ Harrison/ Mortice. The front two doors of the almirah be hammer tonned as directed by Engg-in-Charge/GE, shall be with 75 mm long hinges, three on each side with proper river and welding. The shelves shall be welded to sides and back if almirah interally as shown on drg. One chromium plated rod of 20 mm dia shall be fixed at 75 mm below the top for hanging purpose.
Finish: All metal/ Iron work shall be treat withsynthetic enamel paint of make Berger/Nerolac/Shalimar after doing two coats of metal primer. The entire almirah shall be dual in colour/ shade as directed by Engg-in-Charge irrespective of what of shown on drg. Rest all as per drg and directed by Engg-in-Charge/GE. | 8 | Each | THANE CITY | 30 |
| 2 | Bed Hard Plywood Top FD/E6/ MAP/08 (R) | Dimention: Overall size shall be 2050 mm long, 900 mm wide and 500 mm high (Foot board side) and 800 mm hing (head board side).
Description: All steel shall be rectangular CR Piper of 18 gauge. The head board shall be 80 mm high and foot bard shall be 500 mm high. The frame of head board and foot board shall be 38 mm x 38 mm rectangular CR Pipe, 18 mm x 18 mm rectangular CR pipe shall be provided in the inner of head board frame/ foot board frame as shown in drg. 18 mm thick marnine ply of make Century/ Archid. Green ply covered with both side laminated sheet of approved shade of make: Century/ Archid/ Green ply shall be screwed to MS strip are welded to 18 mm thick rectangular CR pipe with standard workmanship both in head board/ foot board, 25 mm x 65 mm rectangular CR Pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg. One stiffeners of size 25 mm x 25 mm shall be welded between two legs of head board over 150 mm from the ground level. The top of bed hard shall be of 12 mm thick BWR ply of make: Century/ Archid/ Green ply approved as per IS specified guidelines fixed over the four euidistant stiffeners of size 25 mm x 25 mm SQ MS Pipe in line with bottom of 25 x 65 mm long rail section. PVC shoes shall be provided to legs of bed.
Finish: All metal/ iron work shall be pre treated with epoxy powder coated oven baked with synthetic enamel black after doing two coats of metal primer. Rest all as per drg and directed by Engg-in-Charge. | 14 | each | THANE CITY | 30 |
| 3 | Book Case Small FD-237 | Teakwood through out except the followings:-
Top shall be of 18/19 mm thick venered particle board both sides commerical top shall be covered with 1 mm thick plastic laminated sheet. Veener century sunmica, kitply, lamination century sunmica, Kitply. Shutter sides shall be 18/19 mm thick BWR particle board with one side teak veneered & other side commerial, veneer century sunmica, Kitply Apriticle board century BWR kit ply or Century BWR Make. Exposed edges of board shall be covered with 3 mm thick wood edging & shall be fixed as specified. Oxidised pianotype hinges shall be fixed with MS 15 mm long screwes as directed by Engg-in-Charge, Knobs shall be aluminium anodized (dark brown). Make : Hettich, Godrej & Kaff. Rest all as per drg. All wooden surface exposed to direct vision shall be FD-237. | 1 | Each | THANE CITY | 30 |
| 4 | Chair Varandah FD-256 | Frame: The complete frame work shall be made out of 20 mm MS conduite pipe as per drg.
Cane: 3.5/4.0 mm wide cane plastic shall be woven in Godrej pattern.
Make: Case plastic Premier/Shah/ Maharashtra.
Toe: Hard rubber shoe of white colour shall be fixed in legs.
Paint: Two coats of synthetic enamel of white colour shall be applied over a coat primer. Rest all as per drg. | 16 | Each | THANE CITY | 30 |
| 5 | Chair Writing FD/E6/MAP/12 | Description: The frame of the chair shall be of MS tublar frame powder coated can tilever type of size 25 mm x 10 mm in section shall be painted with two coats of synthetic enamel paint of Make: Berger/Nerolac/ Shalimar/Asian of black colour. Back form shall be desired with contoured lumber support for extra comport, 120 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping alround shall be provided at seat and back. Fabric shall be make: D' Decor/ Vivid collections and colour / shade of fabric as directed by Engg-in-Charge. PU arms shall be superior. | 8 | Each | THANE CITY | 30 |
| 6 | Rack shoe steel FD/E6/MAP/ 02 | (i) Frame: Side frame shall be made with 25 mm dia MS pipe wall thickness 18 guage.
(ii) Rack: 20 mm dia MS pipe with 3 Nos 3 mm dia horizontal bars & 9 Nos verticle bars at equal distances.
(iii) Hard rubber shoe to be fixed at leg.
(iv) Paint: All steel memers shall be provided with powder coating.
(v) Rest all as per drg. | 8 | Each | THANE CITY | 30 |
| 7 | Sofa Set 5 seater with cushion FD-273 | Timber: All frame work of the sofa shal be made out of first class hardwood teak.
Foam: Cushion shall be made out of 40 density 100 mm thick foam for seat and back. Make: Sleepwell/Classic/ Dunlop.
Cloth: Irrespective of cloth tepsestry, Velvet cloth shall be provided for cushion as approved by GE.
Polish: All wooden surfaces shall be French polished upto gloomy finish.
Rest all as per drg. | 1 | set | THANE CITY | 30 |
| 8 | Table Bed Side FD/E6/MAP/ 15 | Pipe shall be 18 x 18 mm thick CR square pipe (18 guage) black powder coated. Top: Table top shall be 18 mm thick pre laminated MDF board chokolate shade with TW edging fixed to frame. Drawers: It shall be fixed with suitable channel for easy movement. Bottom of drawer shall be 6 mm commerical plywood which shall act as bottom of table sides and back of drawers shall be made with 12 mm thick BWR grade commercial ply wood. Polish: All exposed wooden surfaces and teak verneered surfaces shall be french polished in chokolate shade. Rest all as specified and shown on drg. | 8 | Each | THANE CITY | 30 |
| 9 | Table Centre FD/274 | Timber: First class hard wood (teak) shall be provided.
Top: 18/19 mm thick prelaminated particle board with natural teak shade on top duly provided with TW beading.
Polish: Two coats of French polish over a coat of primer. Rest all as per drawing. Rest all as per specified and shown on drg. | 8 | Each | THANE CITY | 30 |
| 10 | Table dressing ladies with stool FD/E6/MAP-II/07 | The drg shall be also include the provision of dressing stool alongwith complete unit of dressing table irrespective of whatever mentioned in Schedule 'A'. The body dressing table and stool shall be made of 18 mm thick prelaminated MDF board conforming to Grade-I & Type-II. The pre-laminated MDF board shall conform to the specific requirement given for ECO-MARK under relevant clauses of the standard. The base of & back of mirror shall be 5.5 mm thick ply wood BWR grade as per IS-303. Stool shall be supported on 50 mm dia PVC heavy duty twin caster wheels of approved make. The drawer shall run on powder coated telescopic channel of 1.6 mm thick, the removal seat shall be made out of 74 mm thick urethane foam with 40 density covered with composed leather tapestry with 48" wide. The sides and back drawers and openable shutter of stool shall be of 12 mm thick MDF board, conforming to Grade-I. Rest all as per drg and as specified. | 8 | Each | THANE CITY | 30 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_3164264.pdf
GEM_BID
fd-furniture_2022-02-17-15-26-13_c34dfaa4a001cb3ad71d4db1dab48ac9.pdf
BOQ
boq_item_sample_file_2022-02-17-15-26-13_752c373cd56e885ff715af5491ae6342.csv
BOQ
AppendixA_07ce918c-aa50-4e59-bebd-1de74860b840_SBSOLOHO.docx
OTHER
termsCondition.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .