Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹27.3 L
EMD Value
₹54,600
Closing Date
30 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Providing Face Lifting Works to Existing Mechanized Laundry Building Dhobi Room located at Industrial Health Centre IHC, HAL Bangalore Including Electrical Works.
8838
TENDER NOTICE/NCP/17/24-25/01
Works
Contract Section Civil-FMD-Bangalore
₹0
₹54,600
30 Sept 2024
25 Jul 2024
25 Jul 2024
30 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Hacking the exisiting floor tiles / Mosaic tiles to receive flooring inclduing removal of debris to off the premises, etc., all complete as directed by Engineer-in-Charge.
Dismantling tile work For thickness of tiles 10mm to 25mm in floors and roofs / walls laid in cement mortar including stacking material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding, etc., including dismembering and stacking within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.
Dismantling roofing including ridges, hips, valleys and gutters, etc., and stacking the material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.
Demolishing brick work built in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix), etc., all complete as directed by Engineer-in-Charge.
Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as directed by Engineer-in-Charge.
Half brick masonry in foundations & plinth and superstructure Cement mortar 1:4 (1 cement : 4 coarse sand), etc., all complete as directed by Engineer-in-Charge.
Cement mortar (1:6) plastering 20mm thick for brick/concrete surfaces, finished smooth with trowel including lime rendering for interior faces of walls surfaces including scaffolding, curing, etc., all complete as directed by Engineer-in-Charge.
Providing and laying of 18-20mm thick famed granite tiles of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/Sq m including grouting the joints with white cement and matching pigments, etc., The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, etc., all complete as directed by Engineer-in-Charge.
Providing and laying Glazed / Matt / Antiskid finished Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) of size [600 x 600]mm with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/Sq m including grouting the joints with white cement and matching pigments, etc., The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per Sq m, including pointing in white cement mixed with pigment of matching shade, etc., all complete as directed by Engineer-in-Charge.
Providing Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), etc., all complete as directed by Engineer-in-Charge.
Providing and fixing 30mm thick including ISI marked Stainless Steel butt hinges with necessary screws flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing of the following approved door fittings and fixtures to the above doors, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws, etc., complete. [125 x 70 x 4]mm (ordinary type)
Providing and fixing bright finished brass 100mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws, etc., complete.
Providing and fixing [250 X 10]mm bright finished brass tower bolts (barrel type) with necessary screws, etc., complete.
Providing and fixing bright finished brass handles with screws, etc., complete - 125mm long
Providing and fixing ISI marked [300 x 16]mm oxidised MS sliding door bolts with nuts and screws, etc., complete (Copper oxidised as per IS 1378)
Providing and fixing MS round or square bars with MS flats at required spacing in wooden frames of windows / doors and clerestory.
Providing and fixing 150mm bright finished floor brass door stopper with rubber cushion, necessary brass screws, etc., to suit shutter thickness complete.
Providing and Fixing factory made PVC door frame made of PVC extruded sections of size [75 x 53]mm, having wall thickness 2mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size [28 x 30 x 2]mm thickness (± 0.20mm) and [75 x 200]mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, etc., all complete as per manufacturer's specification and as directed by Engineer-in-Charge.
Providing and fixing 37mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension [115 x 37]mm with wall thickness 2mm (± 0.20mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size [75 x 200]mm long with cross section size of [28 x 30]mm having wall thickness 2mm (± 0.20mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size [110 x 37]mm having wall thickness 2mm (± 0.20mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of [100 x 20]mm printed & laminated and inserting 2 nos 6mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers, etc., complete, all as per manufacturer's specification and as directed by Engineer-in-Charge.
Supplying and fixing approved hardware fittings fixed with necessary screws and other accessories, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing ISI marked oxidised MS sliding door bolts with nuts and screws, etc., complete - (Copper oxidized as per IS 1378) [250 x 16]mm
Providing and fixing ISI marked oxidised MS tower bolt black finish, (Barrel type) with necessary screws, etc., complete - (Copper oxidized as per IS : 1378) [150 x 10]mm
Providing and fixing aluminium handles 125mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, etc., complete.
Providing and fixing wash basin white vitreous china wash basin of size 630x450mm with pedestal completel recessed at the back for reception of pipes and fittings including C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms an all complete including necessary fittings and fixtures, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing grating of rectangular type with openable circular lid of size 150mm nominal square 100mm diameter of the inner hinged round grating, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid of 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all connecting fittings and fixtures to make it operational completely, including cutting and making good to the walls and floors wherever required, etc., all complete as directed by Engineer-in-Charge.
Supplying & Fixing of C.P brass stop cock 15mm dia bore concealed of standrd design and approved make conforming to IS 8931, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing of PTMT soap dish holder having length of 138mm , breadth of 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 grams, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints, etc., all complete as directed by Engineer-in-Charge.
15mm nominal dia Pipes
20mm nominal dia Pipes
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 type A inclduing jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion single socketed pipes, etc., all complete as directed by Engineer-in-Charge.
75mm dia
110mm dia
Supplying and fixing the following PVC specials of approved manufacture fixed with rubber rings and chemical solutions, etc., all complete as directed by Engineer-in-Charge.
Single T with door- 75mm dia
Single T with door 110mm dia
Bend -75mm dia
Bend -110mm dia
Shoe-110mm dia
Providing and laying flamed finish Granite stone flooring [Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent] in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing [600 x 450]mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with Powder coated aluminium (minimum thickness of powder coating 50 micron) built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, etc., Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately)
Providing and fixing With float glass panes of 5mm thickness (weight not less than 12.50Kg/Sq m)glazing in aluminium door, window, ventilator shutters and partitions, etc., with EPDM rubber / neoprene gasket, etc., complete as per the architectural drawings and the directions of engineer-in-Charge
Supplying and fixing Fly proof stainless steel grade 304 wire gauge with 0.50mm dia. wire and 1.40mm wide aperture with matching wood beading, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing rolling shutters of approved make, made of required size MS laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.50Cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and MS top cover of required thickness for rolling shutters [80 x 1.25] mm MS laths with 1.25mm thick top cover), etc., all complete as directed by Engineer-in-Charge.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per Sq m as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size [5.5 x 55]mm with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete for Ridges plain (500 - 600mm)
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources and using recycled concrete aggregate (RCA) as coarse aggregate and fine aggregate within permissible utilization of 20% each, Portland Pozzolana /Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-Charge; for the following grades of concrete.
All works upto Plinth Level Concrete of M25 grade with minimum cement content of 330Kg / Cu m
All works above plinth level up to floor V level Concrete of M25 grade with minimum cement content of 330Kg / Cu m
Centering and shuttering including strutting, propping, etc., and removal of form, etc., all complete as directed by Engineer-in-Charge.
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Weather shed, Chajjas, corbels walls, etc., including edges
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size [1000 x 450 x 50]mm, reinforced with 8mm dia four nos longitudinal & 9 nos cross sectional TMT hoop bars, including providing 50mm dia perforations @ 100 to 125mm c/c, including providing edge binding with MS flats of size [50 x 1.60]mm, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more. for R.C.C. work ready to use “cut and bend” rebars of approved make from factory / workshop to construction site including placing in position and binding all complete upto plinth level and above plinth level, etc., all complete as directed by Engineer-in-Charge.
Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50Gms / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre / 10Sq m over and including priming coat of exterior primer applied @ 0.90 litre /10Sq m, etc., all complete as directed by Engineer-in-Charge.
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, etc., all complete as directed by Engineer-in-Charge.
Wall painting with 2 coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams / litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, etc., all complete as directed by Engineer-in-Charge.
Painting one or more coats of synthetic enamel paint over the existing surface of steel / wood / concrete conforming to I.S.2932 of approved shade and manufacture on new/ previously painted steel surface including preparation of surface by wire brushing / sand papering the loosen and wiping the surface clean with mineral solvents to remove grease and hard marks, etc., prepare the surface for smooth & even using sand paper, metal paste for steel surface and KPF putty for wooden surface and putty paste for plastered surface before painting the first coat. Top coat of desired shade shall be applied after the undercoat is thoroughly dried and is rubbed with fine grade of abrasive paper to ensure smooth and even surface, free from brush marks, etc., all complete as directed by Engineer-in-Charge.
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams / litre, etc., all complete as directed by Engineer-in-Charge.
Rupees Twenty Lakh Twenty Thousand Two Hundred Eighty Eight and Fifty Nine Paise Only
Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Batten type 2X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 2 Nos of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-charge. Make & model: The LED tube & batten shall be of CROMPTON- IGP161LT8-16.2XT8+LT8-20-865-(2) /Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.
Supply and fixing on existing wall/ceiling/frame work, testing & commissioning of surface mounting, water proof industrial luminaire with polycarbonate housing and diffuser suitable for 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W, operating on single phase 230V 50Hz AC supply, built-in electronic driver, Other standard accessories including necessary inter-connections , complete in all respects and as directed by engineer-in-charge. The LED tube & batten shall be of Crompton IGP161LT8-16 1XT8 /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL complete in all respect and as directed by Engineer-in-charge.
Supply & fixing on the building at a height of 5-8mtr approx. including supply and fixing GI pipe bracket made out of 40mm dia class B GI pipe of 1.5Mtrs long bent to shape with necessary fixing hardware etc., to fix on building and testing & commissioning of building light LED light fixture of wattage not exceeding 45 watts and Efficacy > 110/120 lm/W with 10KV SPD with necessary interconnections consisting of pressure die cast aluminium housing, optical cover made out of heat resistance toughened clear glass / polycarbonate with IP66, luminous, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be 5600K+400K, suitable optics for maximizing the spread complete in all respects and as directed by engineer-in-change. The luminaries shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.95. LM 79 certification for luminaries & LM80 certificate for LED shall be produced. Any approved make fitting meeting the above technical specification has to be supplied. The LED Light fixture shall be of Crompton model no:CRP-409-70-57-SL-GL-NSG /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL complete in all respect and as directed by Engineer-in-charge.
Supply & fixing on existing MS hook 1200mm sweep, Ceiling fans complete with blades, down rods, and accessories, 230V single phase 50Hz AC supply. Minimum air delivery 210cu.m/min with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete, erected in position with necessary flexible copper leads of required colour and with canopy, down rod 300/600mm length as per site requirement, necessary rubber bushings, clamps nuts,bolts etc., complete in all respects and as directed by Engineer-in-charge.
Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.
Distribution Board
4 way (4 + 12), Double door MCB DB
32 amps. ratings, FP MCB, "C" curve, 415V, 10 KA breaking capacity.
6-32 amps. ratings, SP MCB, "C" curve, 10 KA breaking capacity.
Switch disconnector fuse units
Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring)
Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to fan point controlled by 1 No. 6A, 250V gr. flush type modular SP switch including providing 1No box type MS Fan hook in ceiling where ever required, 2 module type electronic five stepped speed regulator etc., complete in all respects.
Wiring to exhaust/wall mounting fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects.
Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required(Wiring from Distribution board to Switch box and Switch box to Switch box)
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 No. 4 sq. Mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
16 A switch
6 pin 16A Socket outlet
Supply and fixing of weather proof cable junction box with terminals of size 155 mm x 210 mm x 92 mm Hensel Cat. No. DK 1616 G or equivalent in Legrand/ Schneider/ Hagar make only. The Box shall be mounted at suitable height on the pole using suitable size MS angle frame work with painting as per EIC, with cable entry knock-outs, including rigid support for all components, Din channel, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 complete in all respects and as directed by Engineer-in-charge.
TIMER PANEL
Supply, installation, testing and commissioning of Outdoor weather proof 2rows 24 module module distribution board of Hensel Cat. No.KV 9224 M or equivalent in Legrand/ Hager/ Schneider make including suitable locking facility by means of built in lock with profile cylinder with set of Key's and with suitable size cover, cable entry on one side. The DB shall be mounted at suitable height on the wall using suitable size MS angle/channel frame work with painting as per EIC, with cable entry knock-outs, including rigid support for all components, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 with necessary interconnections between incoming and outgoing MCB's, contactor and timer using suitable size flexible copper wires and comprising of following switchgear and accessories complete in all respects and as directed by Engineer-in-charge.
1No- Modular digital time switch for street light & Building light control of Legrand Alpha Rex 3 D21 or equivalent approved make with one channel daily cycle unit suitable for daily programming to switch ON & OFF and operate on 230V single phase supply.
1No- 32A 415 V gr.10KA 4P MCB with overload and short circuit protection.
1No-25A, ML1.5 3 Pole contactor of L&T Cat.No.SS91851 with contactor coil complete in all respects and as directed by Engineer-in-charge.
Supply & laying in the already excavated cable trench/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of 4Cx16 Sqmm PVC/XLPE, insulated Aluminium conductor 1100V gr. Armoured U.G cables complete in all respect as directed by EIC and as per technical specification.
Supply & laying in the already excavated cable trench/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of 3Cx2.5 sqmm 1100V gr. PVC/XLPE insulated copper Armoured U.G cable with ISI mark and connecting from connector block upto the light fixture complete in all respects.
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required complete in all respect as directed by EIC and as per technical specification.
Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm)
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
Rupees Two Lakh Ninety Two Thousand Seven Hundred Ninety Six and Forty Eight Paise Only
Rupees Twenty Three Lakh Thirteen Thousand Eighty Five and Seven Paise Only
Approximate Amount Put to Tender
Rupees Four Lakh Sixteen Thousand Three Hundred Fifty Five and Thirty One Paise Only
Rupees Twenty Seven Lakh Twenty Nine Thousand Four Hundred Forty and Thirty Eight Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN17.pdf
TENDER_DOCUMENT • 2.47 MB
33CivilTenderDrawing.pdf
TENDER_DOCUMENT • 0.27 MB
33PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
Amd.pdf
TENDER_DOCUMENT • 0.43 MB
33PQ.pdf
TENDER_DOCUMENT • 0.21 MB
33PB.pdf
TENDER_DOCUMENT • 0.39 MB
33TB.pdf
TENDER_DOCUMENT • 3.31 MB
33PBF.xlsm
TENDER_DOCUMENT • 0.07 MB
33ElectricalTenderDrawing.pdf
TENDER_DOCUMENT • 0.15 MB
33Checklist.pdf
TENDER_DOCUMENT • 0.17 MB
33ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
33Undertaking.pdf
TENDER_DOCUMENT • 0.55 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .