PROVISION OF RCC SECURITY WALL WITH PERIMETER PATH AT AF CHAUHTAN STATION UTARLAI

Amount

DISMANTLING

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, posts embeded in concrete complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

ROAD, PATH AND HARDSTANDING/SECURITY FENCING AND GATE

Surface excavation not exceeding 30 cm deep and average 15cm deep and getting out in any type of soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide & not exceeding 1.5 m depth; for foundation etc and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide & not exceeding 1.5 m depth; for foundation etc and getting out in soft/disintegrated rock soil complete all as specified and directed.

Excavation over areas not exceeding 1.5 m in depth for foundation and getting out in soft/disintegrated rock complete all as specified and directed.

All as per item No. 7 above but, exceeding 1.5m and not exceeding 3m depth for foundation and getting out in soft/disintegrated rock complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well remming in layers not exceeding 25 cm, in soil complete all as specified and directed.

Removing excavated soil, to a lead exceeding 50 m but not exceeding 100 m and deposited where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and directed.

Material and labour for precast concrete 1:2:4 type B-1, (using 20mm graded stone aggregate) as in kerb stone with plain fair faces, including chamferes, weathering, throating etc and setting in mortar 1:4 complete with joints to match complete all as specified and directed.

Material and labour for Plain cement concrete 1:2:4 type B-0, using 12.5mm aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Material and labour for 75mm thick cement concrete 1:4:8 type D-2, (using 40mm graded stone aggregate) as sub base of floor complete all as specified and directed.

Supply and fix Vibratory rubber moulded & Coloured precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

Material and labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for RCC M-25 (using 20 mm graded stone aggregate) as in footing, foundation ,raft foundation beams,plinth beams, mass concrete complete all as specified and directed.

Material and labour for RCC M-25 (using 20 mm graded stone aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses, rendering to exposed surfaces complete all as specified and directed.

Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finish surfaces complete all as specified and directed.

Material and labour for formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to batter with fair finish surfaces complete all as specified and directed.

Supply and fix TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm diameter complete all as specified and directed.

Supply and fix TMT bars 6 to 8mm dia bars, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm diameter complete all as specified and directed.

Supply and fix TMT bars 5mm dia and over upto and including 10mm dia bars, as in stirrups, spacers and binders, cut to length, bent to shape required including, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm diameter complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm long but length of bolt exceeding 15cm and not exceeding 22.5cm long diameter of neck 16 to 20mm complete all as specified and directed.

Supply and fix mild steel Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., conforming to Fe -290 Gde E-165 complete all as specified and directed.

Supply and fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to GDE Fe290-0 E250 Gde complete all as specified and directed.

Supply and fix 0.71mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing covering expansion joints (length and girth as fixed) including necesssary drilling holes in brick/concrete work, gutties, screws complete all as specified and directed.

Supply only 25mm thick prefomed Bituminious filler board as in expansion joints complete all as specified and directed.

Supply and fix galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note:-Each line wire shall be measured

Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints in weep holes or laid in trenches complete all as specified and directed.

Supply and fix galvanised punched tape concertaina coil of 1050 mm dia (dia of coil when unstrached) and 2.6mm dia of core wire and shall not be less than 78 Nos of Spiral in each 10RM length when laid and fixed on Y or U shaped angle iron with 3.15mm dia GI wire complete all as specified and directed.

Material and labour for preparing new concrete / plastered surfaces and applying two coats of cement base paint on wall surface in camouflage pattern complete all as specified and directed.

Material and labour for preparation of new steel Surfaces of any description over 10cm in width or girth, not otherwise described and applying two coat of synthtic enamel paint on steel surfaces over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of new or old steel and iron surfaces of any description and girth not otherwise described and treated with two coat of tar, coal tar, black paint complete all as specified and directed.

Schedule of credit Rs. 140061.60

SHREE BALAJI TRADING CORPORATION

M/s godara infratech and power industries