Conversion of existing Musi...

Sound Isolation for Walls and Ceiling : Providing and Fixing in position sound isolation panelling on walls, with 20mm thick high density bitumen based membrane with a porous textile layer, pasted and fixed directly to the wall surface followed by GI strut framework system includes strut thickness 0.55mm, 50mm depth, 600mm x 600mm center-to-center frame, filled with polyster fiber/synthetic wool 50mm thick density 1000Gsm backed with chicken wire mesh for proper placement and fixing of fiber/synthetic wool. Finishing layer comprising of 4mm thick, high density sound proofing membrane sandwitched in-between two layers of sound proofing plasterboard, min. 10mm thick each, and fixed to the GI frame in place, corners, joints and edges to be filled with acoustic sealents/compound and joining tape with no flanking, includes all fixing accessories as required. Make: Tikidan/Tecsound/Polymax

Sound Isolation for Floor : Providing and Fixing in position impact isolation cross-linked polyethylene foam sheet, 10mm thick, fixed/layed to concrete floor, followed by laying of 10mm commercial ply. Above the ply providing and fixing of self- adhesive with 3.9-4mm thick high density bitumen based membrane thermally bonded to a cross-linked polyethylene. Followed by finishing layer of laminated wooden flooring/Tiles/ Carpet. Corners, joints and edges to be filled with acoustic sealents/compound and joining tape with no flanking. Wall linings and the skirting board shall also be isolated and both membranes fixed to the floor shall be extended to skirting level. Make: Tikidan/Tecsound/Polymax

Light Gauge GI Partition: SITC of 50x35mm 0.45 mm thick GI Frame fixed at 600mm Centre to Centre at bothways Horizontal and Vertical. As per design and required accessories and cut Outs to complete in all respect. Make : USG Boral/Gyproc

WALL PANELLING : Providing and fixing of Acoustical Panels on the walls ,with GI frame of size 48mm x35mm GI Studs using 0.45 mm thick and stud channels at 610mm c/c vertical, 0.45mm thick to the wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh with air gap a minimum of 50mm if required on back side, as per detailed drawing, 50 mm thick Acoustical wool, 1000 GSM density to achieve the 0.9 NRC value Cover with Black FRP Tissue on the outer side, and chicken wire mesh support on the rear side abuting the wall face. Finished in stretched fabric finish, using UPVC grippers fixed to 12mm thick ply runners. Make:Audible/Shining Sun/Echomute

FALSE CEILING : Providing and Fixing of acoustically absorptive false ceiling consisting of compressed glasswool acoustical ceiling tiles of size 595 x 595mm, with acoustical fleece. The tiles shall be laid on Galvanized T grid system comprising of main runners 3600x38x24, cross tee 1200x 28x 24mm and wall angle of 3050x24x24mm. The framework to be suitably supported from the false ceiling by means of the GI wire butterfly clips level adjusters etc. , complete as per details. square edge Glass-Wool acoustic ceiling in size 595 x 595 x 15mm having noise reduction co- efficient of 0.90. Make: Shining Sun/Echomute/Audible

ACOUSTICAL CARPET FLOORING : Providing and Fixing of loop pile 10MM Thick acoustical absorptive carpet flooring of 1200 GSM as per approved shade and size including cost of required Cut- Outs, decorative mouldings/ finishing-items/ as per Architectural Design. Make: Nexgen/ShawCarpet/ Milliken

ACOUSTICAL DOORS : Providing and Fixing in position Acoustical Doors along with 100 × 50 mm teak wood frame, doors made from 40mm Teak wood frame 600 ×600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 5mm Soundproofing Membrane from both sides, 12mm Commercial ply and Laminate from both sides, including 150mm heavy duty SS hinges 4 no each leaf, including cost of required Cut-Outs, decorative mouldings/ finishing-items/ as per Architectural Design

Fixed Dual Glass Window: SITC of Fixed Dual Glass Window with first glass having an airgap of 50mm with the another. Second glass should be in inner side and the glass should be in Taper. Including alluminium/Wooden window frame of required size. complete as per details and as per architecture design

S/I/T/C of push ON/OFF type 25 A modular type motor starter switch (white colour) for AC’s including the cost of petty material required to complete the job upto entire satisfaction of Engineer-in-charge

Supply of recessed type 42 watt full window glare free opal Diffuse LED Panel of size 595 x 595 mm suitable for Armstrong/POP/GB ceiling with M.S. Powder coated white Housing. Total system Lumen of 42 watt LED should be 5100 or above in cool day light (5600 K to 6500 K), Power factor 0.95, (CRI) (Ra) 80, LED lamp efficiency )120 lm/w, Average life 50000 hours, comlete with all accessories as required with connections. Make:-Havells, Philips, Bajaj (industrial).