Providing new furniture items in Library at Punjab Vidhan sabha

Supply of 8 seater Reading Table (2350 X 1150 X 740) having following specifications Providing and placing Work Table of size 2350 mm (W) x 1150 mm (D) x 740 mm (H). Worktop shall be made of 25 mm thick MDF one side pre-laminated board conforming to IS:14587:1998 with 0.4 mm PVC membrane pressed on top and having chamfered edges, with access panels provided with soft-closing hinges. Understructure shall consist of a combination of 25 mm and 18 mm pre-laminated twin board of E1-P2 grade and approved shade conforming to IS:12823:1990, edge-banded with matching 2 mm thick PVC lipping, with anodised aluminium alloy 63400-WP profile added at bottom edges for improved aesthetics; construction shall be of knock-down type. Wire raiser shall be made of 0.8 mm CRCA MS conforming to IS:513, epoxy polyester powder coated (DFT 40–60 microns) for carrying wires and cables, with cutout provision below access flap at two locations for standard 8-module Anchor Roma, and additional cutouts with plates shall be provided beside each for mounting Audio Visual cables (e.g. HDMI, VGA-A, etc.). This product should be certified by GreenGuard, IAQ Gold, GreenPro and GRIHA. as per sample selected

Supply of BOOK RACK (1200W X 595D X 2078H) having following specifications Providing, supplying and placing Bookracks with body side panels, frame and cross L-brackets made of 0.8 mm CRCA sheet conforming to IS:513. The assembly shall consist of 2 tie rods, 4 fixing brackets and 2 turnbuckles, with tie rods of 4 mm diameter MS arranged in ‘X’ shape and fixing brackets made of 2 mm thick CRCA sheet conforming to IS:513. Wooden panel shall be 25 mm thick PLT board of E1-P2 grade with edges machine pressed with 2 mm thick PVC lipping glued with hot melt EVA adhesive. Understructure shall be made of 0.8 mm CRCA (IS:513) of size 1200 mm (W) x 595 mm (D) x 80 mm (H) for single body. Shelves shall be 10-bend panels made of 0.8 mm CRCA sheet (IS:513), placed on shelf supports and fixed using nut and bolts from below, consisting of 6 loading levels formed by 5 adjustable shelves for each main and add-on unit, each shelf with uniformly distributed load capacity of maximum 80 kg. Construction shall be completely knock-down type. All MS sheet metal and frame components shall be epoxy polyester powder coated to a minimum thickness of 45 microns. Add-on units shall be stackable widthwise to form a bank of racks with common side panels up to 4800 mm width. Shelves shall have back stiffeners at the rear side made of 0.8 mm thick CRCA (IS:513) acting as separators. Label holder shall be aluminium extrusion of 596 mm length fitted on the front of body, with 300 GSM matt finish paper insert of 596 mm length. Book separators shall be made of 2 mm thick CRCA sheet (IS:513), serving as partitions and supports for vertically placed books. This product should be certified by GreenGuard ,IAQ Gold . as per sample selected

Supply of Reception Desk (2400W X 725D X 740H) including drawer unit on both sides and pedestal having following specifications Supplying and placing in position Reception Table of size 2400 mm (L) x 725 mm (D) x 740 mm (H), the work surface shall be made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade conforming to IS:12823:1990, edge-banded with matching 2 mm thick PVC lipping, with access flap and grommet provided for wire management. Wire management shall include a power box made of 0.8 mm thick CRCA sheet conforming to IS:513 with switch plate provision of 8+3 module Anchor Roma, fixed along the worktop width at access flap position. Modesty panel and side skirting shall be made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade conforming to IS:12823:1990 with 2 mm thick PVC lipping. Understructure shall be made of 18 mm thick pre-laminated twin board of E1-P2 grade, edge-banded with 2 mm thick PVC lipping. Top shelf shall be of 18 mm thick pre laminated twin board of E1-P2 grade with matching 2 mm thick PVC lipping. Hinge door unit and drawer unit shall be of 18 mm thick pre-laminated twin board of E1-P2 grade with 2 mm thick PVC lipping, with drawer bottoms made of 5.5 mm thick MDF whiteboard, handles for ease of operation, and fitted with cam lock for security. Wire riser shall be provided, made of 0.8 mm thick CRCA sheet conforming to IS:513 for proper cable routing. Organizer plate shall be made of 1.2 mm thick CRCA sheet (IS:513) suitable for magnetic sticky notes, and bag hanger hook shall be made of 1.2 mm thick CRCA sheet (IS:513) for bag hanging. The construction shall be of approved design and finish, with all edges machine-pressed and properly finished. This product should be certified by GREENGUARD & Indoor Advantage GOLD. as per sample selected

Supply of Revolving Chairs having following specifications Providing, supplying and placing of Mid Back Chair, the seat and back assembly shall consist of cushioned seat outer made of 30% glass fiber reinforced nylon with upholstered seat inner of polypropylene, moulded with high resilience polyurethane foam of density 45±2 kg/m³ and hardness load 12±2 kgf at 25% compression, upholstered with polyester fabric; the net back shall be made of outer glass fiber filled nylon and inner polypropylene upholstered with polyester mesh fabric of high tenacity yarn, with back size 46.5 cm (W) x 60.0 cm (H) and seat size 51.0 cm (W) x 49.0 cm (D). The back spine shall be made of high-pressure die-cast polished aluminum. The armrests shall be provided with dual adjustments – height adjustment of 6.0±0.5 cm operated by button in aluminum structure connected to aluminum back spine, and depth adjustment of 6.0±0.5 cm in PU moulded armrest top over plastic inner. The chair shall be provided with Active Bio-Synchro Mechanism having 360° revolving type, front pivot tilt with continuous lumbar support, tilt tension adjustment operable in seating position, 5-position tilt limiter, seat/back tilting ratio of 1:2, and mechanism housing in HPDC aluminum with black powder coating of 40–60 micron DFT. Seat depth adjustment shall be provided through a sliding mechanism with adjustment range of 3.75±0.1 cm. Lumbar support assembly shall consist of glass fiber filled nylon lumbar spine fixed to aluminum back spine, with polypropylene lumbar pad fixed through lumbar pad support, having height adjustment of 5.0±0.5 cm. The chair shall be provided with pneumatic height adjustment having stroke of 10.0±0.3 cm. The pedestal assembly shall be made of high-pressure die-cast polished aluminum with 5 nos. twin wheel castors, pedestal of 65.0±0.5 cm pitch center dia. and 75.0±1.0 cm with castors. The twin wheel castors shall be injection moulded in black polypropylene with wheel diameter 6.0±0.1 cm. The overall dimensions of the chair shall be seat height adjustable between 45.5 cm to 55.5 cm, total height adjustable between 95.5 cm to 105.5 cm, and width and depth measured from pedestal 75.0 cm x 75.0 cm. This productshould be certified by GREENGUARD,Indoor Advantage GOLD,BIFMA Level 2,GREEN PRO,GREENGUARD GOLD, GRIHA. as per sample selected

Supply of Executive Table along with Side Credenza and drawer Unit having following specifications Supplying and placing in position Main Table with ERU and pedestal of overall size 1800 mm x 2100 mm x 750 mm, the primary work surface shall be made of 25 mm thick MDF one side pre-laminated board conforming to IS:14587-1998 with 0.4 mm PVC membrane pressed on top, provided with soft closing access flap and in-built power box for wire management. The secondary work surface shall also be made of 25 mm thick MDF one side pre-laminated board conforming to IS:14587-1998 with 0.4 mm PVC membrane pressed on top. The modesty panel shall be of 25 mm thick MDF one side pre-laminated board conforming to IS:14587-1998 with 0.4 mm PVC membrane pressed on top. The understructure shall be made of 25 mm thick pre-laminated twin board of E1-P2 grade in approved shade conforming to IS:12823-1990, edge banded with matching 2 mm thick PVC lipping. The integrated pedestal shall be made of 25 mm thick pre-laminated twin board of E1-P2 grade in approved shade conforming to IS:12823-1990, edge banded with matching 2 mm thick PVC lipping, with drawer fronts made of 25 mm thick MDF one side pre-laminated board conforming to IS:14587-1998 with 0.4 mm PVC membrane pressed on top. The pedestal construction shall be of box-box-file type using powder coated 400 mm long metal panel drawer slides with drawer extension of 325 mm, having soft closing and anti-slam mechanism, provided with handles for ease of operation and locks for security. This product should be certified By GREENGUARD, Indoor Advantage GOLD & GREEN PRO. as per sample selected

Supply of 2 seater Sofa set having following specifications Providing, supplying and placing "Vertex 2-Seater Sofa" with seatback and seat assembly having understructure made of plywood and pinewood members, plywood of 12±1 mm thickness, assembled by gluing, nailing and stapling to secure metal springs and prevent seat foam tearing. Complete-purpose non-woven fabric shall be stapled on the seat frame above the spring assembly to avoid direct contact. Zigzag springs of appropriate diameter, moisture-resistant and termite-proof as per IS:303, shall be mounted on the seat structure using plastic spring mounting clips for support and additional cushioning. Pinewood members shall have cross sections of 22x64 mm, 34x64 mm, 22x40 mm, 22x75 mm and 16x35 mm without major knots or defects. Seat foam shall be PU foam of density 28 kg/m³ and 75 mm thickness, with two top layers of super soft foam of 6 mm thickness. Backrest foam shall be glued with PU foam of density 28 kg/m³ and 25 mm thickness at top, 28 kg/m³ and 10 mm thickness at sides, and entire backrest with PU foam of density 60 kg/m³; seat front shall be glued with PU foam of density 32 kg/m³ and 25 mm thickness. Laminated sandwich foam of density 32 kg/m³ and 10 mm thickness shall be placed between a layer of fabric and the loose seat foam. Upholstery shall consist of polyester fabric and black non-woven cloth with zipper for inserting 30 GSM non-woven partitions, laminated fabric on upper backrest, and backrest upholstery shall be combination of polyester fabric and Leatherite. Legs shall be polypropylene with M8 stud in black matt finish as per sample selected

Providing and supplying Table of size 1500 mm (W) x 750 mm (D) x 728 mm (H), the top work surface shall be made of 18 mm thick pre-laminated particle board with all edges duly sealed with 2 mm thick PVC edge banding. The understructure and modesty panel shall be 18 mm thick pre-laminated particle board. The rectangular frame shall be fabricated from 1.2 mm thick CRCA sheet, finished with epoxy polyester powder coating. Legs shall be fabricated from 38 mm x 25 mm 1.2 mm thick MS ERW tube, finished with epoxy polyester powder coating, and provided with nylon 6 leveler glides fixed with MS bolts. Cable management shall include plastic caps for cable travel, horizontal wire carrier of 0.7 mm thick CRCA and vertical wire carrier of 0.8 mm thick CRCA, all finished with epoxy polyester powder coating. Storage shall include shelf and drawer tray made of 0.6 mm thick CRCA, drawer front of 0.8 mm thick CRCA, both finished with epoxy polyester powder coating, with lock (10-lever) and handle provided. This productshould be certified by GreenGuard as per sample selected

Providing and fixing of Optimier Plus drive Type 2 Bay 24 bodies having overall dimensions of the unit shall be 2400 mm (W) x 5600 mm (D) x 2440 mm (H) and having following specifications: Providing, supplying and placing Storage Unit consisting of single drive units, twin drive units, and last drive unit, the overall dimensions of the unit shall be 2400 mm (W) x 5600 mm (D) x 2440 mm (H) including rails, and the overall dimensions of single drive cover unit (2 Bay: U/C + Fittings + Cover) shall be 2400 mm (W) x 400 mm (D) x 2440 mm (H). The construction shall be rigid knock-down type made of 0.8 mm thick CRCA steel conforming to IS:513, Gr.D, with epoxy polyester powder coating of 40 microns DFT. Shelves shall be 12-bend panels made of 0.7 mm thick CRCA steel (IS:513, Gr.D) with uniformly distributed load capacity of 100 kg per shelf. Undercarriage shall be welded frame made of 3 mm thick HR steel conforming to IS:2062. The movement of drive type units shall be achieved mechanically through PU handwheel and sprocket-chain arrangement rigidly mounted onto the body. The last drive unit understructure shall have 2 anti-tilt bearing assemblies. Roller assembly shall comprise die-cast step wheel, 2 deep-groove ball bearings, and MS shaft, with step wheel made of cast steel fitted on the MS shaft using feather key, bearings fastened with circlips, and the assembly snap-fitted into injection-moulded engineering plastic wheel housing fixed in the U-channel using machine screws, designed to withstand maximum body loads. Fittings shall include centralized locking arrangement through lock mounted on the understructure of last drive unit, made of 0.8 mm thick CRCA sheet (IS:513). The sprocket-chain shall be covered by 1 mm thick CRCA sheet drive unit cover of size 1202 mm x 398 mm x 87 mm fixed on the side of the body. PU handwheel shall be rigidly fixed at suitable height projecting 99 mm outside the cover. Fixed units shall not have the drive unit cover. Each drive type unit shall have a locking knob near the drive wheel for manual locking, with end stoppers provided to prevent derailment. Nuts and bolts shall be galvanized, black-oxidized, or Zn plated. Total number of loading levels per understructure shall be 10. Label holders shall be aluminium extrusions of length 396 mm for last and single drive units, and 796 mm for twin drive units, fitted on front cover of body, with 300 GSM matt milky white sticker paper of 394 mm/794 mm length respectively, and covered with transparent polythene sheet of 150–200 micron thickness. Platform for drive type optimizer shall consist of rail extrusion with MS bright bar of 25.4 mm square firmly fixed using countersunk screws; rail extrusion arrangement shall be in 3 lengths: 800 mm, 1600 mm, and 2400 mm, connected using 3 mm thick HR metal strip (IS:2062) fixed with CSK screws. This product should be certified By GRIHA, GREEN PRO, GREENGUARD, Indoor Advantage GOLD as per sample selected

Providing and placing Storage Unit in teak shade of overall dimensions 900 mm (W) x 450 mm (D) x 1950 mm (H), including height of screw-type leveler of 50 mm with possible adjustment of 15 mm, the product shall have aesthetically appealing completely knock-down construction. Provision shall be made for add-on units that stack widthwise to form a continuous row of storage. The unit shall be made from a combination of top panel (0.5 mm CRCA), side panel (0.5 mm CRCA), bottom panel (0.8 mm CRCA), back panel (0.5 mm CRCA), top and bottom stiffeners (1.2 mm CRCA), and end cover (0.5 mm CRCA), all CRCA “D” Grade conforming to IS:513. Shelves shall be 12-bend panels made of 0.7 mm thick CRCA (D Grade, IS:513) with a maximum uniformly distributed load capacity of 55 kg per shelf; 5 fixed shelves shall be provided per unit. Doors shall be two in number, each of 448 mm (W) x 18 mm (T) x 1898 mm (H), made from a combination of aluminium alloy (63400) extrusion and 4 mm thick clear toughened glass with crystal edge polish finish. Doors shall be provided with soft-closing hinges, aesthetically designed aluminium handles, and cam locks with 3-way locking provision and click-action mechanism. The key shall be removable in both locked and unlocked positions, and the lock housing shall be zinc alloy die-cast. All aluminium components of the doors shall be epoxy polyester powder coated to a thickness of 50 microns ±10 microns in approved shade. This productshould be certified by GreenGuard as per sample selected. (Note :- Cutouts in the back side of storage unit for electrical switches have to be provided wherever required as per site)

Providing and placing factory-made Modular Kitchen Cabinets of overall size 1200 mm (W) x 850 mm (H) x 560 mm (D), the cabinet body shall be made of 0.5 mm thick panels and horizontal sandwich frames of 1.2 mm thick galvanised sheet with zero spangles as per ASTM A653, all components shall be powder coated with high-quality powders (Dupont, Kansai Nerolac or equivalent) to achieve dry film thickness of 40–60 microns with minimum pencil hardness of 2H. Shutters shall be minimum 18 mm thick, made of 1.2 mm thick galvanised steel sheet, fixed to the framework using two CED-coated hinges of approved make (Blum, Hettich or equivalent) with soft/auto-closing mechanism, 95° opening, fixed with stainless steel screws/nails, and provided with approved handles of 128 mm pitch. Shelves shall be made of 1.2 mm thick galvanised steel, supported on approved adjustable self-supporters, allowing height adjustment as per requirement. All finished components shall be tested for critical quality parameters, including adhesion and impact tests, static load test, and shelf deflection test. Modular kitchen accessories shall be fixed inside drawers/cabinets with panels of bottom and rear shelves of 0.6 mm thickness as per technical requirement. Floor units shall be supported on 100 mm high vertical adjustable legs (Hettich or equivalent) covered with PVC skirting in brushed aluminium finish (Rehau or equivalent) attached with appropriate hardware. Cabinets shall be fixed to floor/wall/slab using metal screws and rawl plugs of appropriate size. The work shall be executed as per approved drawi as per sample selected