ADDITION ALTERATION TO EXISTING GATE ALONGWITH SIGN BOARDS PROVISION OF REST ROOM VITRIFIED TILES AND ADDN ALTN TO GUARD ROOM AND CERTAIN OTHER WORKS AT OTM COMPLEX CG LAND PANVEL

Amount

S & F for rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe - 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing including painting complete all as specified and as directed.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with and including grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and as directed.

Dismantling mild steel work of any description not otherwise provided for as in gates etc all as specified and as directed.

Surface dressing not exceeding 15 cm deep in hard and dense soil all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in sub base of floor all as specified and as directed.

M&L for 80 mm thickness, M-40 grade Machine pressed precast concrete interlocking paver block rubber moulded with grey colour cement and pigment of any shape and size conforming to IS 15658 - 2006 over and including 50mm thick crushed stone sand including watering and consolidation all as specified and as directed.

M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete of size not less than 300x450x150mm, in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M & L for Precast cement concrete 1:3:6 type C1 (Using 20 mm graded granite stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of bock masonry surface or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement all as specified and as directed.

M & L for preparing newly plastered surfaces of walls and applying two coats @ 1.67 ltr/10 sqm of Acrylic weather proof exterior paint of required shade over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm all as specified and as directed.

S &F Alluminium composite panel 4mm thick, in all colours of approved brand for external / internal wall cladding at all heights and elevation with 3mm thick thermoplastic core of anti oxidant LDPE sandwitched between two skin of 0.5mm thick alloy sheet making a total sheet thickness of 4mm. The surface shall be finished with PDVF base coating on the top side and service coating on the reverse side shall be with polymer paint. The system to be fixed to the brick/ stone/ masonry/ RCC walls/ framed structure with necessary clamps, rackets and anchor fasteners fixed over and including base frame fabricated with aluminium square pipe of size 40mm x 20mm with 1mm thickness in 600mm x 600mm size of grid including stainless steel screws, nut bolts, washers, cleats, weather silicon sealent for groove filling, backer rods etc, complete all as per manufacturer instruction and all as specified and as directed by Engr- In - Charge. All clamps and brackets shall be hot deep galvanished minimum 20 microns, ( items include cost of aluminium frame, ACP Panels, Clamps, Weather sealent, gasket, foam, fixtures, scaffolding, all machineries and any fastening strips, nuts, rivets, washers, etc all as specified and as directed.

Taking down door/ window shutter with frame without taking off shutters from frame of any description not exc. 1.50 Sqm each etc complete all as specified and as directed.

Taking down door/ window shutter with frame without taking off shutters from frame of any description exc. 1.50 Sqm not exc 4.00 Sqm each etc complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing and all as specified and as directed.

S&F for aluminium powder coated frame (minimum thickness of powder coating 50 micron) in any position such as frame, partition including fabrication of frame and fixing to wall/floors with necesaru lugs, cleats etc including all acessories such as beading, clips for fixing of glass/particle boards etc complete all as specified and directed. Make of aluminium section - ''Jindal/ Indalco/ Hindalco.

S&F for Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kgs, complete all as specified and directed.

S & F for prelaminated particle board 9mm thick, exterior grade, prelaminated on both side with decorative choice lamination, fixed in position all as specified and as directed.

S&F butt hinges 100mm long stainless steel and fixed all as specified and as directed.

S&F aluminium tower bolt 200 mm long of anodised section and fixed all as specified and as directed..

S&F Anodised aluminium alloy handles cast type, 150mm long and fixed all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.

S & F 18/19mm thick pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with and including 6mm thick teak wood fillets, fixed in cup board shutter, Shelf, kitchen CB or pelmet alaround complete all as specified.

Supply and fix in repairs GI pipes medium grade 15mm bore with all fittings / GI bends complete in trenches all as specified and directed

Supply and fix in repairs Gun metal globe or gate valve 15 mm bore with iron wheel head screwed both end for iron pipe and fixed all as specified and as directed.

S & F stop valve of cast copper alloy screwed down high pressure with crutch of butterfly handle screwed down both ends for iron pipe suitable for 15 mm dia pipe and confirming to IS-781-1977 and fixed complete all as specified and as directed.

S & F Bib tap, 15 mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F CP shower of size 15 mm dia (bore) complete all as specified and as directed.

S&F shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT (any colour minimum weight of 40 grams) complete all as specified and as directed. .

S&F pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without lestered 'Hot' & 'Cold' with long screwed Shank & fly nuts, screwed for iron pipe of 15mm bore complete all as specified and as directed.

S&F PVC Connection 15 mm bore with PTMT nuts of lengh 450mm complete all as specified and as directed.

Supply and Fix 15 mm bore Angle stop valve cast copper alloy fancy type chromium plated screwed down high presure with crutch or butterfly handle, screwed both ends for iron pipes/unions complete including dismantling/ taking out old, unserviceable item all as specified & directed.

S&F in repair vitreous china WHB white, flat back size 550mm x 400 mm including cutting for and pinning in ends of CI brackets with and including CP waste coupling of 32 mm dia bore of discharge pipe and making good wall or floor fitting to match existing surface complete all as specified and directed.

S&F High density polyethylene pipes(HDPE) of pressure rating 6 kgf/Sqcm of 38/40mm bore fixed complete to walls, ceilings or in floors etc. completed all as specified and as directed.

S&F towel rail 450 mm long of PTMT fixed with including cromium plated brass screw and wooden/plastic cleats (170gms) all as specified and as directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 300x300x7mm thick / 400 x400x7mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match, over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes including dismantling of old tiles of any description and thickness and removing all rubbish from the premises all as specified.

S&F for glazed ceramic coloured tiles 350x250x7mm/ 450x300x7mm thick on vertical surfaces such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM (1:4) as in backing coat complete including dismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F for coloured glazed ceramic tiles of 8-10 mm thick (square) of size 600mmx 600mm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 15 mm screed bedding in cement mortar 1:6 complete including dismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

All as per item 42 above but on vertical surfaces such as skirting / dados including 10 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed.

S&F in repairs, vitreous china squatting pan " Orissa pattern" size 580 x 440 mm white with itegral foot rest including 'P' or 'S' Trap (Excluding flushing cistern) and connecting to out let and flush pipe and fixed in lean concrete of required mix as specified complete all as specified and directed.

S & F in repair PVC flushing cistern syphonic action type flushing cistern 10 ltr capacity low level coloured/white with inlet ball valve, float and handle including bracket / flush pipe of 32 mm dia PVC complete and connected to out let complete all as specified and directed.

M&L for preparation of old painted surfaces of concrete or plastered surfaces, of any description and girth and not otherwise described in any location and applying one coat of plastic emulsion all as specified & directed by Engineer-in-charge.

M&L for preparing old painted surfaces and applying a coat of oil bound distemper on surfaces of walls all as specified & directed by Engineer-in-charge.

M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of distemper on ceiling all as specified & directed by Engineer-in-charge.

Supply and fix steel work in tubular trusses including special shaped washer etc, complete using ERW or including butt welded tubes confirming to IS 1161 - 1979 including painting all as specified and directed.

Supply and fix prepainted galvanised aluminium zinc coating GI based corrugated steel 0.5 mm thick of any colour having tensile strength of 550MPA as in roof covering, fixed to steel frame work with self taping screws all as specified and directed (steel frame work shall be measured and paid separately)

M&L Cutting grooves in brick wall 75mm wide and 65mm deep out cracks to 'V' section grouting cracks with cement slurry 1:3 mixed with water proofing compound to fixed the sheet with walls

S & F in repairs, anodised aluminium snap grid frame work for false ceiling using main and cross tees with anodized aluminium angle bracket of size as indicated, if not indicated it shall be not less than 15mmx15mmx1.5mm, weighing not less than 0.12 Kg per running metre and main and cross tee shall be supported at ends all along the wall with anodized aluminium angle of size not less than 40mm x 25mm x 2mm, weighing not less than 0.36 Kg per running metre and shall be fixed to ceiling with supporting hanger consisting of 6mm dia GI rod, J bolts with necessary bolts, nuts and washers with and including Gypsum Board 12mm thick in ceiling ficed with screws as per manufacture's instructions complete all as specified and directed by Engr-in-Chrage.

Construction of Septic tanks of size 2000x900x1400mm, excavation and earth work in any type of soil, foundation in PCC 1:5:10 over and including 300mm thick moorum, PCC 1:2:4 inside septic tank, brick work with old size bricks built in CM 1:4, RCC Slab covers including RCC precast Manhole cover complete for 10 users all as specified and as shown in TD No. CEJZ/2002/TD/S-2 dated 19/03/2002 including amendments upto date.

S & F Steel rolling shutters thickness of laths 1 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in foundation, including raft, footings, foundation beams, plinth beams bases of columns complete all as specified and directed.

M & L for MS I-section Fe-410 W (Gde -E- 250) quality A, including cutting , welding Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. errecting /fabrication complete all as specified and as directed.

S & F flex sign board of approximate size 20 feet x 10 feet fixed in position all as specified and as directed.

S & F 18/19mm thick pre-laminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified.

S&F G I frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm & web of 27mm fixed to surrounding wall using nylon sleeves & screws at 450mm c/c / intermediate channel 0.9mm thick having two equal flanges of 15mm each & web of 45mm suspended from soffit at approx 900mm c/c with GI cleat & steel expansion fasteners with & incl ceiling sections (n exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm & flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm c/c complete all as specified and as directed.

Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and as directed by Engineer-in-Charge.

M & L for point wiring in repairs complete with proper colour coding using 1100 Volts grade 1.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS : 694:1990 with ISI marked in and including casing and capping, ISI marked with all accessories fixed in wall/ceiling/roof/floor etc., with modular white cover plate and frame of required modules suitable for mounting switches, sockets, fan regulators including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor green colour conforming to IS : 694:1990 with ISI marking as continuous earthwire connected to common earth dolly all as specified and directed for One three pin switch socket 5amps outlet on the same board.

M & L for point wiring in repairs complete with proper colour coding using 1100 Volts grade 1.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS : 694:1990 with ISI marked in and including casing and capping, ISI marked with all accessories fixed in wall/ceiling/roof/floor etc., with modular white cover plate and frame of required modules suitable for mounting switches, sockets, fan regulators including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor green colour conforming to IS : 694:1990 with ISI marking as continuous earthwire connected to common earth dolly all as specified and directed for One three pin switch socket 5amps outlet on independent board.

M & L for point wiring in repairs complete with proper colour coding using 1100 Volts grade 2.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS : 694:1990 with ISI marked in and including casing and capping, ISI marked with all accessories fixed in wall/ceiling/roof/floor etc., with modular white cover plate and frame of required modules suitable for mounting switches, sockets, fan regulators including 2.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor green colour conforming to IS : 694:1990 with ISI marking as continuous earthwire connected to common earth dolly all as specified and directed for One three pin switch socket 5amps outlet on independent board.

S&F ceiling rose with surface bakelite, 65 x 50 mm polycarbonate, isolated body, two/ three terminals with ISI mark all as specified and directed.

S&F Modular switch 6 Amp, 1 way, 1 module complete all as specified and as directed.

S&F Modular Socket 6 Amp, 2/3 pin combined, 2 module complete all as specified and as directed.

S&F Modular switch 16 Amp, 1 way, 1 module complete all as specified and as directed.

S&F Modular Socket 6/16 Amp, 2/3 pin combined, 2 module complete all as specified and as directed.

S&F fan regulator modular type, 240 V , two module with steps in increasing speed order complete all as specified and directed.

S&F ceiling fan, complete with blades, down rods, anchor fastener for fixing, accessories, 230 V, 1200 mm sweep, with squirrel cage induction motor complete in all respect.

Supply and fix in repair LED tube light fitting 1X 20 Watt including LED light 20 watt, industrial channel made of CRCA sheet steel housing suitable for complete with all accessories internally pre-wired, connecting up with and including three core sheathed flexible copper conductor cable of 0.75 Sqmm size and PVC square block for fixing LED tube fitting complete all as specified and directed. . Make:- Halonix Cat No HLIB-05-118T8 LED or equivalent in Bajaj/Philips/ CG

Material and labour for submain wiring along with earth wire using 2x 6.0 sq mm (colour coading) + 1x 4.0 sq mm earth wire (green colour) of single core PVC insulated multistranded copper conductor 1100 Volts grade FRLS type in and including PVC casing capping of size not less than 25 mm dia (ISI marked) with all accessories such as bend, junction boxes, short pipes of suitable size complete all as specified. Note: Two run of 6.0 sqmm cable and one run of 4.0 sqmm cable and one run of PVC casing capping will be measured as one unit.

Cutting of existing bituminous surface/PCC hard standing by using mechanical method of any type for laying of cables/GI protection pipe and making good of disturbed surfaces to match with adjoining surface complete all as specified and directed . Note:-PCC for making good shall be measured and paid separately

Material and Labour for PCC 1:3:6, type C-2 (40 mm graded stone aggregate) as in foundations / making good of disturbed surfaces / filling mass concrete complete all as specified and directed.

M& L for costomized, fabricated glow sign board 11 mtr length x 1 mtr wide with and including provision of LED alphabets along with Coast Guard crests letters 16 Nos i.e. 'INDIAN COAST GUARD' + 2 crests of size 450mm x 450 mm x 40 mm , letters 19 Nos in English Times Roman Style i.e. '(MINISTRY OF DEFENCE)' of size 300mmx300mmx40 mm with LED lights driven in each letter with a gap of 5 mm in between two letters. All above consisting of 2 mm thick aluminium sheet with front face covered with retro reflective thermo acrylic sheet and providing LED lights with driver in each letter and logo and fixing ACP sheets at any height including required wiring, control panels, complete all as specified and as directed by Engineer-in-Charge. Note- 1. LED alphabets and logo along with lights and all other items to be used are included in above quoted cost. . 2. Contractor should submit the final CAD 2 D colour drawing showing the final shape of gate panel with all letters and logos along with letter sizes and getting its written Approval of Accepting Officer before fabricating.

M & L for customized, fabricated sign board 11 mtr x 1 mtr and provision of SS alphabets Big - 14+1 alphabets (BUREAU OF NAVIKS + 01 Nos ICG LOGO) of size 450 x 400 x 40 mm, SS small letters - 21 Nos (FAIR , TRANSPARENT & FIRM) of size 300 x300x40 mm with a gap of 5 mm in between two letters. All above fixed on a concrete wall at any height all as specified and directed by Engineer-in-Charge. Note- Contractor should submit the final CAD 2 D drawing showing the final shape with all letters and logos along with letter sizes and getting its written approval of Accepting Officer before fabricating.

Supply and fixed LED flood light, 120 Watt, 230 V, AC outdoor type with thermal management in multiple optics and equippped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed. . Make - Wipro/ Phillips/ Halonix/ Bajaj

Supply and fix LED spot light 8 W made in die cast alluminium housing with decorative clear opel acrylic diffuse with IP 65 protection including decorative supporting stand. Make - Wipro/ Phillips/ Halonix/ Bajaj

M&L for submain wiring with two runs of 1.5 sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLS 1100 volts grade cable drawn through and including PVC conduit and one run of 1.5 sqmm single core PVC insulated but unsheathed multi stranded copper copper conductor FRLS 1100 volts grade cable as earth conductor in concealed/ surface PVC conduit but shall be increased as per actual site requirement all as specified and directed.

M&L for submain wiring with two runs of 2.5 sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLS 1100 volts grade cable drawn through and including PVC conduit and one run of 1.5 sqmm single core PVC insulated but unsheathed multi stranded copper copper conductor FRLS 1100 volts grade cable as earth conductor in concealed/ surface PVC conduit but shall be increased as per actual site requirement all as specified and directed.

Supply and fix PVC FRP SMC looping box, IP-65, rectangular, off white, locking arrangement, with MCB SP 10 Amp 'C' series, fixing arrangement with necessary MS clamps and washers complete all as specified and directed by engr-in-charge.

S & F Aviation Obstruction light ABS material, IP-40 with voltage 12-24 and -10 to 60 degree centigrade temperature range including stand and nut bolts complete all as specified and directed.

Supply and laying, jointing and testing XLPE insulated, extruded PVC outer sheathed and inner sheath, galvanised steel armoured cable with alluminium conductor suitable for rated voltage of 1100 Volts grade 35 sqmm 3.5 core armoured cable laid in trenches / pipe / ducts or on pole complete all as specified and direcetd. .

Supply and laying, jointing and testing XLPE insulated, extruded PVC outer sheathed and inner sheath, galvanised steel armoured cable with alluminium conductor suitable for rated voltage of 1100 Volts grade 10 sqmm 4 core armoured cable laid in trenches / pipe / ducts or on pole complete all as specified and direcetd.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m in depth; for laying of cables ,protection pipes and foundations etc. and getting out in soft/loose soil all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m in depth; for laying of cables ,protection pipes and foundations etc. and getting out in hard/dense soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.

Supply and laying unreinforced precast concrete cable cover, class LV, Type 1, flat, size 250mmx150mmx40mm complete all as specified and directed

Supply and filling in and spreading unwashed river sand for cushioning and covering the under ground cables in trenches upto 23 cm and punning to 18 cm to provide required cover complete all as specified in SSR Part-I and as directed. Note: Punned thickess i.e 18 cm shall be measured for payment purpose.

Material and labour for GI pip 50 mm dia "light grade" complete with all fittings laid in trenches,road/culvert crossing,on wall, floors,on roof,on pole, for cable protection complete all as specified and directed . Make :- Jindal/Tata/BST

Supply and fix MCB DB SPN, double door, IP-42, 8 way having earth terminal, neutral bus terminal for 8 way circuit complete in all respect mounted on wall including making connection with legs/ thimbles all as specified and directed by engineer -in-charge.

S&F MCB SP 06-32 Amps, 10 KA, 240 Volts in CB box complete all as specified and as directed by engineer in charge.

S&F MCB SPN 32 Amps, 10 KA, 240 Volts in CB box complete all as specified and as directed by engineer in charge. Make- Legrand/ Schiendler/Hanger/Standard/Havells

Supply, installation, testing and commissinoning outdoor type, sloping canopy type, LT panel board suitable for working on 3 phase, 4 wire, 415 volts, AC, 50Hz, cubicle type, mounted on iron angle frame, free standing, dust and vermin proof, air ventilation, made out of 3.00 mm thick CRCA sheet and suitable size angle iron and flat duly powder coated painting and shall be any CPRI approved manufacturer as approved by GE. Panel shall have front and rear opening, mechanical type locking arrangement, cable alleys, bus bar chamber and switch gear compartment, hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate, copper bus bar TPN 200 Amps duly covered with heat shrink sleeves duly colour coaded fixed on DMC/SMC insulators, housed in a separate bus bar chamber and control wiring with copper conductor cables of adequate size and length, incoming and outgoing MCCBs shall have extended bus bar links and the panel board shall be mounted on mild steel angle iron frame of size 50x50x5 mm duly painted with two coat of synthetic enamel over a red oxide primer with necessary nuts, bolts and washers etc and including necessary civil work/PCC foundation, earthing- 02 Nos with complete material (as per MES SSR pt I plate No 3) as per site requirement and approved by GE complete all as specified and directed including comprising of following:-

(a) MCCB 100 Amps, 4 P,16 KA, 415 volts, 50Hz-1 Nos (Incomer)

(a) MCCB 63 Amps, 4 P,16 KA, 415 volts, 50Hz-2 Nos

(b) MCB 32 Amps TPN,16KA, 415 volts, 50Hz- 03 Nos

(c) MCB SPN 40 Amps - 02 Nos

(d) Digital voltmeter (0-500 V), Ammeter(0-200 A) with , VSS & ASS -01 set

(e) Timer switch for three phase 20 A with accessories -01 Nos

(f) LED phase indicator lamps RYB-01 set

Anjali Constructions

Advait Enterprises

jkconstruction