Repairing/Renovation of Fire Hydrant Sprinkler with necessary Fire Fighting equipment etc including Construction of (1.5 Lakh) capacity Water Tank with Pump House for entire Hospital Building of FAAMCH, Barpeta

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m²

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 50 mm thick

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Vertical

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing,laying, testing & commissioning of "C' class heavy duty MS Pipe conforming to IS 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports. anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.(Make- Nezone/Jindal/Tata) 150 mm dia

Providing, laying, testing & commissioning of 'B' class heavy duty M.S. Pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling/concrete block with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 25MM

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze / gunmetal seat duly IS marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. (Make-Zolota/Sant/Audco) 65 MM

Supplying, fixing, testing and commissioning of Non-return valve of following sizesconfirming 4 to IS:5312 complete with rubber gasket, Glbolts, nuts, washers etc. as required. (Make- Zoloto/Sant/Audco) 80 mm

Providing, installation, testing and commissioning of C.I. BODY Foot Valve / Y- strainer a)200 mm dia

Supplying and fixing single headed internal hydrant valve with instantaneous Stainless steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type- A) with blank PVC cap and chain asrequired. (Make-ESSEL/Newage/Swati)

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank PVC cap and chain as required. (Make-ESSEL/Newage/Swati)

Supplying and fixing 63mm dia, 15 m long RRL hose pipe with 63mm dia Stainless Steel male and female couplings duly bound with Gl wire, rivets etc. conforming to IS 636 (type-A) as required. (Make-Newage/CRC)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the folloeing as required. 20mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. pipe and socket. (Firestop/ Swati/Newage) a)30 mm dia

Supplying & fixing 63mm dia Stainless Steel short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. (Make-

Supplying and fixing of fire brigade confection cast iron body with Stainless Steel male instaneous inlet couplings coplete with cap and chain as required for suitable dia MS pipe connection conforming to IS 904 as required. (Make-ESSEL/Newage/Swati) 4 way - 150 mm dia M.S. Pipe

2 way - 150 mm dia M.S. Pipe

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. (Make-Indofoss)

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 80 mm dia

150 mm dia

Providing, fixing testing & commissioning of installation control valve of cast iron body, brass / bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven nechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and btpass,test control box, ball valves, MS pipe off required size, flanges, orifice plate, gasket ete of following sizes as required. (Make- HD Fire) 150 mm dia

Providing,fixing,testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories. (HD/Unique) Pendent Sprinkler

Horizontal side wall sprinkler

Providing.fixing, testing & commissioning of Rigid Dropping or flexi drop of sprinkler below false ceilling.

Providing, fixing testing & commissioning of adjustable Roset plate

Testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required Servicing, repairing, alirtment .commissioning and automatic operation of Electric driven Main and Sprinkler Fire

Servicing, repairing alirtment coramissioning and automatic operation of Stand by Diesel engine driven main Fire Pump

Servicing, repairing alirtment commissioning and automatic operation of electric driven pressurisation Jockey pump

Servicing • repairing • alirtment ,commissioning and automatic operation of electric driven Trece pump

Servicing, repairing,testing commissioning of Electrical control panel with automatic on off of all pumps.

Supply and Fixing of Modular Dry Chemical Powder type fire Extinguisher 10Kg capacity complete in all respect. (Make- Firestop / Firend)