SPECIAL REPAIRS TO BLDG No. P - 142 OFFICERS MESS AT CPE ITARSI UNDER GE (I) (P) FY JABALPUR

Amount

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including surfce finishes of any type like kota stone/terrazo etc complete all as specified and as directed.

M&L for 25mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone Aggregate as in sub base of floor finish even and rough to receive further floor finishes (tile/kota stone/ marble), complete all as completed all as specified and directed.

M&L for 15mm thick screed bed in cement mortor 1:6 as in bedding layer of morter to receive further floor finises complete all as specified and directed.

Material and labour for 10 mm thick Vitrified tiles (square/ rectangular) of any colour as approved by the user, polished area of each tiles n.exc. 0.36 sqm laid in floors using spacer bars (keeping min 2 mm joint between tile) as per manufactures instruction set in cement slurry and pointed with polymer joint filler. The Joints of tile will be filled using epoxy/ polymer joint filler complete all as specified and directed by engr in chrage.

All as per item No. 04 here-in-before but on vertical surface such as skirting/dado including 10mm thick screed bed in CM 1:4 complete all as specified and directd.

Material and labour for joint free Non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.11 Sqm but not exce 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 18 - 20 mm thick machine cut kota stone slab flooring laid over and including 20 mm thick cement screed bedding in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab as in floors, including rubbing and pollishing complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub-base complete all as specified.

M&L for 100mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in pavement/plinth protection,plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) surface finished fair and even complete all as specified and as directed.

Taking down cement plaster from wall/ceiling including raking out joints hacking for key scrubbing down with water complete including any type of surface finishes like terrazo/tile etc including removal of debris to a distance not exc 500m complete all as directed.

Material and labour for glazed ceramic colour tiles 450x300 x 7mm thick as in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 15mm rendering in cement mortar (1:4) on fair faces of brick/concrete surfaces finished with even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm rendering in cement mortar (1:6) on faces other than fair of brickwork finished with even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm rendering in cement mortar (1:3) to ceiling and similar work finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour grinding and polishing of existing of Kota stone/tarrazo tiles flooring polished upto mirror finish complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in foundations, basement slabs and mass concrete etc complete all as specified.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing and as required welding complete all as specified and as directed.

Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required complete all as specified and as directed.

Distmantling of existing ceiling boards of any description including cover fillets complete and M&L for fixing Gl frame work for plaster of paris seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete as per design (sunken/raised) approved by user all as specified and complete all as specified and as directed by Engr- in -charge (Frame work shall be measured flat).

M&L for 10mm thick plaster of paris ceiling (Gypsum anhydrous) as per design approved by the user including making coves, vaults, coffer, sunk or raised ,moulding, design for fan etc fixed on metal frame work and including reinforced with G.I. Wire mesh complete all as specified and complete all as specified and as directed. Note - the ceiling will be measured flat No extra payment will be made for design . (GI metel frame work will be paid seperately).

Supply and fixing Stainless Steel railing with 20mm square bar in vertical @ 300mm c/c, stainless steel flat (25mm x 6mm) welded at top with 50mm dia stainless steel pipe of grade 304 fixed in hand rails including welding, grinding, buffing & welding to MS 50mm x 6mm hold fast and grouted, 125mm below the concrete surface and making good (SS shall be of grade 304 quality) complete all as specified and directed.

Supply and fix for 25mm dia chromium plated steel drapery curtain rods including brackets, end finials(Latoo),for curtain rails fancy decorative type and fix with brass screws to walls approved quality etc complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Supply and fixing aluminium powder coated frame for doors, partition, windows, ventilators with one or more rebated including necessary jointing cleats, rubber beading, aluminium powder coated snap beading, screws, aluminium powder coated Flat for fixing etc. complete all as specified and directed. (Min thickness of powder coating 50 micron).

Supply and fixing aluminium powder coated glazed shutter(for doors) with style and top rail of section 80 x 44mm, 16 Gauge thick and bottom rails of section 112 x 44mm of 16 Gauge thick, middle rail 150 x 44mm of 16 guage thick fixed on floor spring, both side opeining without sash bars but including 5mm thick plain/tinted glass glass pan with and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized handle, locking arrangement (mortice lock) and aluminuium anodised tower bolt 200 mm long and hydraulic floor door spring complete all as specified.

Supply and fixing aluminium powder coated aluminium window having three track with aluminium section 92 mm X 31.75 mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40 mm X 18 mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rmt mounted on bearing to slide on tracks plain anodized in approved shade fixing 5mm thick glass, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner Etc. Complete all as specified and directed. (Min thickness of powder coating 50 micron) Glass and wire mesh will be paid seperately.

Supply and fixing aluminium window having fixed glass with aluminium section having section 50.80 mm x 25.40 mm (weight 0.489 kg/m) glazing clear section (weight 0.109 kg/m) with plain anodized and fixing 5mm thick tinted/brown glass making frame and glass water tightening making it good etc. complete all as specified and directed. (Min thickness of powder coating 50 micron).

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanized wire staples all as directed.

Supply and fixing in repair aluminium (extruded section body) door closer hydraulically regulated designation No. 3 universal type, suitable for door shutters of 851 to1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

Supply and fixing aluminium powder coated grill size 75mmx75mm and 6 to 7 mm thick approved design for windows/ventilator fixed with and inluding powder coated Aluminum flat 40 mm over window with screws "F/U "/ flat complete all as specified all as specified and as directed.

Supply and fixing 12 mm thick clear toughened glass door (saint-gobbain or modi guard, acid work or sand blasting work on it, as per our design), with making holes / cut-outs as required, making edges clear smooth polished, fixed with stainless steel cladded aluminium profile glass door rails with necessary door assembly (pre installed hardware, removable clip on covers, end cap, and rubber gasket or proper grip) and fixed on Double action floor spring with closing force EN3, having high grade cast iron mechanism body, housed within a corrosion resistant zinc paint protected galvanised steel loose box, internal mechanism components utilizing heat treated high alloy steel & ball bearing for optimum efficiency, closer mechanism totally immersed in hydraulic fluid, "hold open" models, having the possibility of the shutter being held open at 90 degrees angle, adjustable closing speed valve, with pivot to suit patch fittings and door shutters, having tempered full glass panel of up to 80 kg weight, and Door handle: 475 mm long X 32 mm diameter. "S" type, back to back installation, glass damage preventing gasket, grub screws finish complete in all respect Complete all as specified and directed.

S&F pressed steel frame for doors and windows with two rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.

S&F pressed steel frame for doors and windows with two rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.

M&L for PCC 1:3:6 type C0 (using 12.5 mm graded stone aggregate) as in back filling of pressed steel frame etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

Dismantling of AC, plain or corrugated steel sheeting of any gauge, thickness, complete all as specified and as directed.

Supply and fixing in repair 3.8mm thick clear transperant poly-carbonate/acrylic sheet both side UV protected , heat resistant as in roof sheeting fixed over MS steel truss/frame of half circle shape fixed with help of providing two component aluminium "H" Section or Aluminum flat as required of thickness 1.5mm with EPDM rubber gasket on faces in contact and filling the gap with silicon sealants making the system leakage proof complete all as specified and directed.

S&F pre-painted galvanized aluminium zink coating GI based corrugated steel sheeting 0.50 thk of an colour having tensile strength 550Mpa as in roofing fixed with self tapping screws complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in Kerb/parafits etc complete all as specified and as directed.

M&L for structural steel work as in truss, rafter purlin, made out of anglle/Hollowpipe/tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc including special type of washer etc. complete using ERW or induction but welded tubes conforming to IS-1161-1998 grade St-240 complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mmx95mm made out of 5mm wood grain colour PVC sheet reinforced with MS all as specification and drawing.

Supply and fix 30mm thick factory made solid PVC Moulded Door Shutter with wood free EPS, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing.

Supply and fix 30mm thick factory made solid HDF Moulded Door with wood free EPS , 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 5mm thick Moulded masonite sheet on the one face and and 5mm plain colour masonit sheet on back face, suppling and fixing in frame at site as per specification and drawing.

S&F 35 mm thick flush shutter, soild core construction, with block board core and plywood face panel commercial type on both sides all as directed.

Supply and fix 100 mm size stainless steel butt hinges, medium weight fixed with cadmium plated screws complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Material and labour for granite (of any type) 20 mm thick machine cut, bedded, jointed with grey cement sluury and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

Labour only for rounding to edges of granite slabs one edge, such as in cooking platform and other similar work complete all as specified and as directed.

Material and labour for 300x300x25 mm thick PCC designer Pre-polished tiles (Factory made) as in floors, set & jointed in neat cement slurry and pointed in coloured cement with pigment over and including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for roughing existing surface of walls and ceiling including making pokes @ of 300C/C, cleaning down the suface and applying a layer of plaster of paris as per manufacturs instructions complete all as specified and all as directed.

Material & labour for compete removal of existing treatment/new plaster and applying wall putty of standard make as per manufacturer's instructions to give smooth flawlesss surfaces complete all as specified.

M&L for two coats of Oil bound distemper over a coat of primer, of any shade over prepared wall putty/plaster of pair surfaces on walls complete all as specified and as directed.

M&L for texture painting including complete removal of all existing treatment from internal surfaces and leveling/edging the disturbed planes/edges isomg mecessaru filling compound of putty to obtain smooth, regular/even finish using sand paper providing rustic finish(medium grade)made from emulsified acrylic polymers, siliceous aggrgate, marble chips, quartz powder and additive applied with trowel on walls and provide grooved pattern in vertical directins complete all as specified.

M&L for preparetion of newly POP ceiling surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Complete removal of existing treatment of wall including washing, rubbing down and stopping of old treatement and material and labour for applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement and applying two coats of anti fungal exterior emulsion paint over a coat of cement primer complete all as specified and as directed.

M&L for One coat of Synthetic enamel paint over old painted surface of steel of any description not otherwise described over 10cm in width or girth including preparation of old surfaces complete all as specified and all as directed.

Material and labour for two coats of synthetic enamel paint over new steel surface exceeding 10cm width or girth over red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for applying one coat of synthetic enamal paint to wooden surface exeeding 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

Material and labour for pre cast cement concrete louvers and jallies 50mm thickness set in cement mortar 1:4 of type B0 1:2:4 using 12.5mm graded aggregate) measured solid all moulding but including frame etc complete all as specified.

Taking out old wooden boarding as in from kitchen cup boards and M&L kitchen shutters and partition of Factory made Solid PVC embossed shutter 18mm thick (styles), with 2mm thick moulded PVC prelamenated coloured sheet on the front of face and fixing with frame as per specifications with all around FRM sheet , PVC particles board 18mm thick as directed incl all requisite iron mongry such as alu anodised kobs, aluminium handle cast type 75mm long, ball catchers, piano type hinges etc.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed including removal of debris to a distance not exeeding 500m as directed.

Material and labour for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down GI tubing 15mm bore of any description including cleaning for refixing or removal to store complete all as specified and directed.

All as per item No. 72 here in above but 20mm bore.

Material and labour GI tubing 15mm dia medium grade galvanized with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No. 74 here in before but 20mm bore.

Refixing old GI pipe 15 mm bore and connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.

Refixing old GI pipe 20 mm bore and connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.

Cutting chases for concealed water tubing or concealed , etc. in brick walls and making good in cement mortar (1:3), cutting not exceeding 10cm girth complete all as specified and as directed.

Supply and fixing in repairs floor mounted vitreous china EWC (White colour) including double action symphonic low level cistern size 695x355x640mm with complete fittings and seat cover of 1st quality as approved. Make - CAT part No- C849N/O/P. "PRINCE" of Paryware or equivalent make in Neycer/Cera/HR Johnson/Hindware/Jaquar/Kohler.

Supply and fixing in repairs vitreous china wash basin counter type of size 515x395x145mm including CP waste coupling 32mm dia, chain and plug and porcelain stopper etc as approved. Make- C849J "INSLIM 515" model of Paryware, or equivalent make in Neycer/Cera/HR Johnson/Hindware/Jaquar/Kohler.

Supply and fixing in repairs Vitreous China Urinal (white colour), Half stall type size 305x305x440mm (Aquasel in standered urinal in white colour including all fittings with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and approved by the Engr-in-charge Make-CAT No C0578 "Aquasel" model of Paryware or equivalent make in Neycer/Cera/HR Johnson/Hindware/Jaquar/Kohler.

Supply and fixing in repairs Vitreous China white colour urinal partition size 350x675x130mm and including 60mm long brass screws, pointing around partation back in cement Make CAT part No . C0571 "Magnum" of Paryware or equivalent make in Neycer/Cera/HR Johnson/Hindware/Jaquar/Kohler.

Supply and fixing in repairs 100 mm dia stain less steel grating with waste hole Cat Part No FT-04 of prayag or equivalent make in parryware/Hindware/Jaquar/Kohler.

Supply and fixing in repairs 100mm/75 mm stain less steel grating Cat Part No FT-02/FT03 of prayag or equivalent make in parryware/Hindware/Jaquar/Kohler.

Supply and fixing in repairs chormium plated wall mixer 3-in-1 system(Wall Mixer with overhead and hand shower arrangement with connecting legs,wall flanges and wall bracket for hand shower for fixing in 15 mm dia pipe complete all as specified and directed. Make: CAT No QQT-CHR-7281 Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing in repairs chromium plated over head shower 180mm Square with arm 400x25x25mm square shape for wall mounted shower with flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make: cat Part no OHS-CHR-1755 of Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing in repairs chromium plated health faucet (ABS body) with 8mm dia .2 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed. Make: cat part No ALD-CHR-573 of Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing in repairs chromium plated concealed stop cock with fitting sleeves and adjustable wall flange with seal for fixing in 15 mm dia pipe complete all as specified and as directed. Make: CAT No QQT-CHR-7421 Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing in repairs chromium plated angular stop cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed.Make: CAT No QQT-CHR-7053 Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing in repairs chromium plated Pillar cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make: CAT No QQT-CHR-7011 Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing in repairs chromium plated bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fixing in repairs chromium plated Sink Mixer with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make: CAT No QQT-CHR-7319B Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing in repairs chromium plated two ways bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make: CAT No QQT-CHR-7041 Jaquar orequivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing in repairs chromium plated bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make: CAT No QQT-CHR-7040 Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing in repairs bib taps of 15mm bore fancy type, long body chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixing in repairs stop cock concealed type of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

S&F Towel Rack 600mm Long with Lower Hangers fixed with and including chromium plated brass screw and wooden/ Plastic cleats Cat Part No AQN-CHR-7781 of Jaquar equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing in repairs chormium plated Central hole basin mixer fixing in 15 mm dia pipe complete all as specified and as directed. Make: CAT No QQT-CHR-7167B Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing glass shelf 600mm long complete all as specified and as directed. Make: cat part no AQN-CHR-7771 of Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

S&F Toliet paper Holder with flip complete all as specified and directed by Engr In charge Cat Part No AKP-35753P of Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

S&F soap dish in postion complete all as specified and directed by engr in charge Cat Part No AKP-35731P of Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing in repairs stainless steel kitchen plate rack of size 36" X 36" X10" of approved make complete all as specified and directed. (Note : Quoted rate is deemed to be included the cost of fixing to wall including necessary cutting to brick wall and inserting wooden gutka for fixing with brass screws).

Suply and fixing in repairs stainless steel double bowl Kitchen Sink finish polish and steel grade of SS 304 made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 X 460 mm with bowl size 45cmx20cmx10cm complete all as specified and as directed.

Supply and fixing in repair PVC Multy Utility Mirror Cabinets of 350x600mm with 4mm thick looking mirror complete all as specified.Make : PRAYAG cat Part No. 551 or equivlent make in commander/Shakti/Polytuff.

Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin complete all as specified.

Supply and fixing 15mm PVC connection of length 600mm with PTMT nuts of superior quality complete all as specified and directed.

Dismantling water tanks of capacity exc 500 and n exc 1000 ltr complete all as specified and directed.

Supply and fixing rotational moulded PVC water storage tank, 500 ltr capacity (cylindrical vertical type multy layered with closed top) including inlet, outlet andbrass valve, high pressure with polythene float valve of 20 mm . washout holes of approved make hoisted and fixed complete all as specified and as directed.

Supply and fixing in repair moulded polythene water storage tank of 1000 ltr capacity hoisted and fixed in position and brass valve, high pressure with polythene float valve of 20 mm complete all as directed.

Cleaning and removing all scale and dirt of PVC water storage tank, cleaning the tank using bleaching powder/chlorine gas etc from tanks and mouth of eructing pipe incl disconnecting existing tanks and refixing in position after cleaning for PVC tank of any capacity tank complete all as specified. (Note :- After cleaning date of cleaning to be painted on tank with white paint).

Supply and fixing in repair Vitreous china EWC 'P' or 'S' Trap of size 400x365x540mm, white including Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for EWC (excl flushing cistern and flush pipe) complete all as specified and as directed.

Supply and fixing in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm cocomplete all as specified and directed.

Supply and fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs corner glass shelf complte all as specified and directed Make Cat part No. ACN-1173 of Jaquar or equivalent make in GEM/Marc/Kohler/ESSCO Parko/Kingston/ESSESS/Prayag/ Shakti.

Supply and fixing chromium plated towel rail of 20 mm dia, D type, 600mm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Supply and fixing in repair 10 mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination including 6mm thick teak wood lipping, fixed with screws to timber frame work as in cupboard complete all as specified and as directed.

Supply and fixing in repair UPVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.

Supply and fixing in repair UPVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.

Supply and fixing in repair PVC(SWR) bend 110mm dia, Shue, complete all as specified and directed.

Supply and fixing in repair PVC(SWR) branch piece, single T equal or unequal 110 mm dia complete all as specified and directed.

Supply only integral water proofing liquid admixture for concrete and mortar (Make : CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of Pidilite).

S&F PVC (SWR) 110mm bore vent cowl complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110mm,setting and jointing with solvent cement concrete type B-1 1:2:4 complete all as specified and as directed.

S&F PVC (SWR) 75 mm bore vent cowl complete all as specified and as directed.

S&F PVC (SWR) bend 75 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) bend 75 mm dia without access door complete all as specified and as directed.

Taking down/removing the existing roof treatment including bocking coat if any and disposal of debris to a distance not exceeding 100m as directed by Engr-in-Charge rending in cm 1:4, 10mm thick over roof surface finishing fair and even without using extra cement including mixing with WPC as per manufactur instructions and primering the plastered surface using bitumen primer @ 0.3Kg/Sqm and applying water proofing treatment using 3mm thick Acetic poly propylene (APP)Membrane modified pre fabricated with non woven polyester reinforced established Weight not less than 3.6 kg /sqm laid over a coat of bitumen 85/25 @ 1.2 Kg / Sqm as per manufactures instructions complete all as specified and directed by Engineer in charge.

E/M Portion Taking down carefully aluminium / copper point wiring with surface/ concealed PVC conduit or wooden batten ( light, fan, socket, bell or power ) including sunk in cast iron / pressed steel terminal boxes except fitting such as switches, ceiling roses, lamp holders, sockets, regulators, call bell, light fitting any sketch etc and making good disturbed surfaces of walls, floors etc complete.

M & L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed rigid non mettalic PVC conduit medium grade (make of conduit-Presto Plast/Pressfit) not less than 19/20 mm ( ISI marked ) with all fitting and fixing accessories including sunk in pressed steel chromium plated terminal boxes,conceled in wall of make & maching the existing surface ) with 2.8 mm thick hylum brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators etc and 1.5 sq mm multi stranded copper conductor cable as continuous earth wire drawn with wiring and connected to common earth dolly complete for one light point/fan point controlled by one switch all as specified and directed.

All as per item No. 130 here-in-before but one socket outlet 5 Amps controlled by one switch on the same board.

All as per item No. 130 here-in-before but one socket outlet 5 Amps controlled by one switch on independent board.

All as per item No. 130 here-in-before but one bell / buzzer controlled by one bell push.

All as per item No. 130 above but with 2.5 sq mm multi stranded copper conductor cable for one 15 Amps socket outlet controlled by one switch on independent board and 1.5 sq mm PVC insulated multi- stranded copper conductor cable as continuous earth wire complete.

Supply and Fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP/DP 10A- 20 Amps with complete accessories all as specified and as directed.

Taking down carefully aluminium sub main wiring with wooden batten / PVC surface conduit complete of any size.

Material and labour in repairs for sub main wiring with two single core 4 sqmm multi stranded copper conductor, FRLS PVC insulated, unsheathed cable including rigid non metallic PVC conduit medium grade, ISI marked, 20 mm dia for sub main wiring including 4 sqmm FRLS PVC insulated and unsheathed stranded copper conductor as earth wire in conceled in wall of make & maching the existing surface make & maching the existing surface and making good to the disturbed surfaces to match the existing surfaces complete all as specified and directed. Note :- Three runs of 4 sqmm copper conductor cable and one run of PVC conduit will be measured as one unit.

S & F ceiling rose surface bakelight two to three terminal.

S & F Ding Dong bell AC, 240 volts single pole complete.

S & F Modular Bell push 6A 1 module complete.

S & F Fan step regulator, 120W, 240 volts 2 module

S & F Modular switch 1 way 6A, 240 volts 1module complete.

S & F Modular switch 1 way 16A, 240 volts 1module complete.

S & F Socket, 6A - 2/3 pin combined 2 module complete.

S & F Socket 6A/16A - 2/3 pin combined 2 module

S & F White cover plate with frame, 1 module

S & F White cover plate with frame but 2 module

S & F White cover plate with frame but 3 module

S & F White cover plate with frame but 4 module

S & F White cover plate with framebut 6 module

S & F White cover plate with frame but 8 module

S & F White cover blanking plate1 module

S & F Metal flush box 1/2 module.

S & F Metal flush box 3 module.

S & F Metal flush box 4 module.

S & F Metal flush box 6 module.

S & F Metal flush box 8 module.

S & F Endura Linear Neo surface and wall mounted LED batten 20 Watt, extruded aluminum housing for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver environmental friendly, energy efficient ready to use pack housing with reflector cover channel, complete with all accessories internally pre wired including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking soen the existing fittings of any type. Make - Havells cat Part No. ENDURALINEARNEOBS10WLED865SPCWH or equivelent make in CG/Bajaj/Philips/Wipro

S & F Endura Linear Neo surface and wall mounted LED batten 10 Watt, extruded aluminum housing for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver environmental friendly, energy efficient ready to use pack housing with reflector cover channel, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking soen the existing fittings of any type. Make - Havells cat Part No. ENDURALINEARNEOBS10WLED865SPCWH or equivelent make in CG/Bajaj/Philips/Wipro

Supply and Fix Cylindro high power for LED 35 Watt light having intensity levels from 1500-3500 Lumens which is the perfect alternate to conventional HID lamps suitable for 3 circuit 4 wire universal tracks with complete accessories including taking soen the existing fittings of any type all as specified and directed by Engr in Charge as per site requirement. Make - Havells cat Part No. ENDURALINEARNEOBS10WLED865SPCWH or equivelent make in CG/Bajaj/Philips/Wipro

Supply and Fix Sparkle Pro adjustable recess mounted adjustable for LED 30 Watt downlights made of extruded Aluminium housing and high power LED light source with Driver LEDDRIVER30WS clear diffuser with separate electronic driver with complete accessories including taking soen the existing fittings of any type all as specified and directed by Engr in Charge as per site requirement. Note : The quoted rate includes LED light fitting with Driver with clear diffuser. Make - Havells cat Part No. ENDURALINEARNEOBS10WLED865SPCWH or equivelent make in CG/Bajaj/Philips/Wipro

Supply and Fix Maestro round LED 15 Watt new generation, environmental friendly, ultra aesthetically desigh compact downlighter with high rightness LEDs, ideally suited for low ceiling areas for glare free lightingr with complete accessories including taking soen the existing fittings of any type all as specified and directed by Engr in Charge as per site requirement. Make - Havells cat Part No. ENDURALINEARNEOBS10WLED865SPCWH or equivelent make in CG/Bajaj/Philips/Wipro

Supply and Fix Edgepro round for 18 Watt LED range of slim-Fit low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology with complete accessories including taking soen the existing fittings of any type all as specified and directed by Engr in Charge as per site requirement. Make - Havells cat Part No. ENDURALINEARNEOBS10WLED865SPCWH or equivelent make in CG/Bajaj/Philips/Wipro

Supply and Fix Flexion LED 24 Watt digital RGB strip IP 40 color coordinated 5 m with light travel function, comes with an IR remote LED driver for Flexion Strip with complete accessories including taking soen the existing fittings of any type all as specified and directed by Engr in Charge as per site requirement. Make - Havells cat Part No. ENDURALINEARNEOBS10WLED865SPCWH or equivelent make in CG/Bajaj/Philips/Wipro

S & F wall/surface mounting CFL Luminaires (Mirror light) decorative energy efficient luminaire with anti-glare diffuser & decorative end caps suitable for 11W CFL (SU). Make - Havells Cat Partt No-LHFOECF1OZ1W011 acrylic diffuser including CFL 1x11 Watt complete fittings.

S & F Security/street light fitting LED 40 watt energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP-66 roadway luminaire with high power LED as light source with toughened glass and impact resistance pf IK07 and GI pipe 40 mm dia, light grade for mounting bracket bent to shape 1.50 RM and fixing arrangement with two Nos of MS clamps set, nut bolts, washers of suitable size and fixing on wall/pole complete all as specified and directed by Engr-in charge. Make - Havells cat Part No. ENDURALINEARNEOBS10WLED865SPCWH or equivelent make in Bajaj/Philips/Wipro.

Supply and Fix turbo force wall air circulator fan for size 750 mm, aerodynamically designed blades for higher air delivery and minimal noise levels, indexable to different positions up to 15 degrees, circulation up to 90 degrees for total flexibility conforming to IS : 2997-1964 standards with complete accessories all as specified and directed.

Taking down MCB DBs /Energy meter/Main Switches of any size after disconnecting supply and kept in safe custody, taking down & remove the old wooden meter box from site, plastering the existing disturbed wall surface including colour wash and refixing the Meter/ MCB DBs/Main Switches again with connection complete all as specified and directed.

S & F sheet metal enclosure MCB DB 4 way tripple pole and neutral 415 volts complete.

Supply and Fix for sheet metal enclosures for SPN DB's 240 volts, factory made double door flush type, IP-42 protection and all as per IS-8623, made from sheet metal 8 way 200 amps rated bus bar to be fixed with wall all accessories complete all as specified and as directed.

S & F MCB single pole 240 volts 6 to 32 Amps complete.

S & F MCB double pole 240 volts 16 to 40 Amps complete.

S & F MCB TPN 63 Amp 440 Volts. Note for item No 168 to 173 : For MCB's & MCB DB's, MCB shall be of 10 kA breaking capacity having, C, characteristics as per IS-8828 with air circulating channels, bicontact terminals, dual position DIN rail clamps with IP-20 degree protection, insulating sliding shutter, MCB for DB's shall be of same make of DB's, wiring cable shall be connected to MCB's with suitable lugs (copper lugs for copper cable and aluminium lugs for aluminium cable).

Earthing complete with glavanised steel earth plate elactrode 600x600x6.0 mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below ground leves) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 5 of MES SSR Pt-I 1991 print and as directed. Note:- (i) Item of earthing includes cost of 15mm bore medium grade GI protection Pipe (7.5 Meters long) for earth lead any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25% (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done for obtaining desired results.

Dashmesh Enterprises

M/s SHIVRATAN CONSTRUCTION

MANISH INDUSTRIES

pyarelal galar