Construction work of two additional suites and internal roads etc. in the inspection building of the Irrigation Department in Shahjahapur district (Lot No.-1).

Amount

Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and lead upto 30.0m including back filling, watering and ramming of excavated earth with disposal of surplus excavated earth as directed by the Engineer in charge upto a distance of 30m.

Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) in foundation and floors with curing complete, including cost of all material, labour, T&P, shuttering etc required for completion of work.

Earth work in filling with ordinary soil with all lead and lift of earth i/c all cost of earth, royality & taxes etc complete in all respect.

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete in all respect.

R.C.C. work with cement, approved coarse sand and 40 mm guage approved stone grit in the proportion of 1:1.5:3 in footings, excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. (strength of the concrete shall not be less than M-200), per cum.

R.C.C. work with cement, approved coarse sand and 20 mm guage approved stone grit in the proportion of 1:1.5:3 in slabs, excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. (strength of the concrete shall not be less than M-200).

R.C.C. work with cement, approved coarse sand and 20 mm guage approved stone grit in the proportion of 1:1.5:3 in lighter beams i.e. having spans upto 6.0m, excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. (strength of the concrete shall not be less than M-200).

R.C.C. work with cement, approved coarse sand and 40 mm guage approved stone grit in the proportion of 1:1.5:3 in columns, excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. (strength of the concrete shall not be less than M-200), per cum.

Class M-150 brick work in 1:4 cement fine sand (of 2.25 fineness modulus) mortar in super structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work, thickness of wall of half brick thick , including supply of all materials, labour, tools and plants, proper curing etc. required for proper completion of the work.

P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bends, hooks and authorised over lapping with all cost of labour, material, T&P etc complete in all respect.

12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:4 over brick work below plinth, minimum thickness not to be less than 1cm including supply of all materials labour, tools & plants, proper curing etc required for proper completion of the work.

Providing and laying vitrified tiles in floor of 600x600 mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in desired colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand), including grouting of joints with white cement with all cost of material, labour, T&P etc complete in all respect.

Providing & laying 18mm thick white Granite stone (super quality with area of slab above 0.50 sqm) flooring over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry including rubbing and polishing of joints with all cost of labour, material, T&P etc complete in all respect.

2.5 CM thick D.P.C. with cement, approved coarse sand 1:2 and including water Proofing Material As Directed by Engineer in Charge with proper completion.

Distempering with oil bound distemper of approved brand manufacture and required shade on decorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as of british,shalimar,asian paints after throughly brushing surface free from mortar droppings and other foreign matter and also including preaparing the surface even also sand prepared smooth including cost of all materias. including 2mm thick putty above Plaster.

Providing and laying integral cement based water proofing treatment "Brick Coba 12 mm thick" including preparation of surface as required for treatment of roofs, balconies, terraces etc

Supply and fixing of 32 mm thick flush doors commercial quality conforming to I.S. 2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handle, springs and other fittings but excluding their supply, fitting with necessary screws to be supplied departmentally with all cost of labour, material, T&P etc complete in all respect.

Providing & fixing second class teak wood glazed shutter for widow including ISI Mark anodised aluminium but hinge with necessory screw.

Mild steel or iron work of small sizes and sections such as hold fast etc. ( when not included in an over all rates)wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work , with all cost of labour, material, T&P etc complete in all respect.

Providing sal wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) with all cost of labour, material, T&P etc complete in all respect.

Providing & fixing fly proof galvanised M.S. wire gauge to windows & clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm in 2 nd class teak wood beading 62x19 mm with all cost of labour, material, T&P etc complete in all respect.

Providing & fixing 30 mm thick wire gauge shutters fly proof galvanised M.S. wire gauge using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm in 2 nd class teak wood for doors & windows i/c ISI mark M.S. butt hinges with all cost of labour, material, T&P etc complete in all respect.

Painting on steel surfaces over priming coat on steel and other metal surfaces white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour, tools and plants etc. required for proper completion of the work.

Painting on wood surfaces over priming coat on wood and white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour, tools and plants etc. required for proper completion of the work.

Providing aluminium sliding bolts, ISI marked anodised 16 mm dia with nuts & screws and 300 mm long with all cost of material, T&P etc complete in all respect.

Providing aluminium Tower bolts, ISI marked anodised 10 mm dia with nuts & screws and 300 mm long with all cost of material, T&P etc complete in all respect.

Providing aluminium Door handle, ISI marked anodised with nuts & screws and 125 mm long with all cost of material, T&P etc complete in all respect.

Providing and laying of 80 mm thick Factory Made interlocking cement concrete tiles (300mpa) i/c levelling & dressing of surface to required levels & slope, filling joints with local sand with all cost of material, T&P etc complete in all respect.

Granolithic marble dado/skirting 2 cm thick consisting of 15 mm thick layer of one part cement, 2 parts of approved coarse sand i/c 5mm thick surface coat with ordinary marble chips in proportion of 1:2 as specified or directed by Engineer-in-charge & polished by hand or machine & finally finished with french imansion polish or other approved polish i/c supply of all material, labour, T&P etc. required for proper completion of work.

Providing & laying 6mm China white glaged flooring or skirting Dado laid with cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement (with pigment) slurry including rubbing and polishing of joints with all cost of labour, material, T&P etc complete in all respect, per sqm

Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design with all cost of labour, material, T&P, proper curing etc complete in all respect.

Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality with all cost of labour, material, T&P, etc complete in all respect.

Providing and fixing C.I. tee/Bend at the inlet and outlet of septic tank with all cost of labour, material, T&P, etc complete in all respect.

Providing & fixing 75mm dia vent pipes with all cost of labour, material, T&P, etc complete in all respect.

Providing & fixing of 75mm dia cast iron terminal guard with all cost of labour, material, T&P, etc complete in all respect.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyviny l Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Supplying and fixing 10cm PVC pipe Including all Fittings.

Supplying and Placing on terrace polyethylene water storage tank with cover and suitable locking.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 1.7.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Single pole)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(double pole)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing and fixing false ceiling including cost of all material, labour, T&P etc.

M/S S K ENTERPRISES