REPAIR OF COMPOUND WALL, FENCING GATE NEAR NIYWAN GATE UNDER AGE (I) AYODHYA CANTT

Amount

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc 6 m mean radius complete all as specified and directed by Engr-in-Charge.

All as per Srl item No. 2.00 above but except bricks.

Taking down cement plaster from brick or stone walls any description including racking out joints, hacking for key, scrubbing down with water to receive plaster of rubbish off the premises etc.complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of Acrylic smooth exterior paint of required shade @ 1.67 ltr/10 Sqm over a coat of exterior primer applied @ 2.20Kg/10Sqm complete all as specified and directed.

M&L for preparing old decorated surfaces by complete removal of existing decorative treatment of any description on wall surfaces and applying 1.50mm thick wall care putty and two coats of weather proof exterior emulision (APEX of Asain paint or equivalent) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

M&L for mild steel work as in hand rails, drilled and countersunk for balusters running bars, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

M&L for mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.

All as per Srl item No. 10.00 above but fixing only.

M&L for PCC (1:2:4) type B0 (using 12.50mm graded aggregate) as in cills, coping, bed plates, bed blocks and similar work including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel iron surfaces of any dicription over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any dicription over 10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

S&F barbed razor tape concertina coil of Minimum dia SG hot galvanised spring tensile wire manuufactured by M/S Special steel LTD or M/S Super fence or M/s Global Engg or other equalent make as approved by AGE(I) of UTS 145 to 150 Kg per mm sq and dia of coil when stretched 1000mm having minium no of circle 10 Rm ,min no of clip 25 Rm & min wt of coil 1.625Kg/Rm hot dip galvanized complete all as specified and directed by Engr-in-Charge.

Dismantling of stone slab and tiles laid on dry of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick cement concrete (1:5:10) type E2 (using 40mm graded stone aggregate) as in sub-base to floor and the like complete all as specified and directed.

M&L for laying/spreading of sand as in 25 mm thick cushioning to precast concrete interlocking paver block including watering & consolidating all as specified and directed.

M&L for 60mm thick M-35 grade machine pressed precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006, laid dry over sand cushioning and joints filled with dry fine sand complete all as specified and directed. Note : Sand for cushioning shall be measured and paid for separately.

Dismantling floor, hearth or wall tiling including CM bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L 20 mm Granite stone slabe (of any type) work (table rubbed and polished) as in steps, jambs, pillars, win dow-cills, cooking plat forms and like, laid over 5mm thick screed bed or bedding layer in cement mortar (1:4), set in neat cement slurry and pointed in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed by Engr-in-Charge.

S&F in repairs, Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and directed by Engr-in-charge.

B.S.S.ENTERPRISES

K R KAUSHAL AND SONS

His And Her Enterprises

MISRA TRADING CORPORATION

ABC CONSTRUCTION CO.

R K BROTHERS

Pundir Construction Co.

SAI RAM ASSOCIOATES

Khan Brothers

J R ENTERPRISES