PROVISION OF SHED NEAR HWO SECTION AND RENOVATION TO BUILDING NO P-31 AND CERTAIN SANCTIONED WORKS AT CHAF BANGALORE

Amount

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exc 4 Sq. M each (Without taking off shutters from the frames) and stacking at site where directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc. or MH, pier holes etc. n.exc 10 Sqm on plan and nexc 1.5 m in depth and getting out in soft/ loose soil.

M&L for Hardcore of gauge n exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces.

M & L for plain cement concrete Type D-2, 1:4:8 (using 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils.

Removing excavated soils not exc 50M and depositing where directed at a level not exc1.5M above the starting point.

M & L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth without using extra cement.

M&L for Pre-cast cement concrete block masonry with solid blocks, set with CM 1:6, type B1 1:2:4, exc. 10 cm in width and setting in mortar,complete all as directed.

Demolition of Reinforced Cement Concrete of any description and in any position.

Demolition of brick work or stone/boulders Masonry built in cement mortar or cement lime mortar including all quions, arches, pillars, ect but excluding ashlar facings dressed stone work and precast concrete articles all as specified and as directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

M&L for 25 mm thick Cement concrete type B1 1:2:4 using 20 mm graded stone aggregate as in levelling concrete finished even and fair to recive floor finshes,all as directed

M&L Vitrified Ceramic tiles of size 600x600mm of size and 10mm thick light shade in floors set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and directed.

M & L forRendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting.

M & L Coloured Glazed ceramic tiles 450 X 300 X 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match.

Taking down cement plaster on brick or concrete or stone walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even etc complete all as specified and as directed.

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer complete all as specified and as directed.

M&L for preparing new plastered surface of walls and applying three coats of white wash complete all as specified and as directed

M/L 2nd class H/wood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints complete.

S/F MS hold fasts/wind ties.

M/L PCC 1:3:6 type C1 20mm grade aggregate as in padding, hold fasts/filling of chowkhats or similar work as directed.

S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 30 mm thick Second class hard wood Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats

S & F Alluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples.

S/F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

M & L for Powder coated Aluminium windows of three tracks outer frame top, side sections, bottom frame(track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wire mesh(total 3 nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40X18X1.5mm inculding glass 4 mm thick and aluminium wire cloth, 0.45mm nominal dia wire and average width of aperture 1.40mm complete all as specfied and dierected by Eng-in-Charge

S & F Powder coated Aluminium Frame work for grills Deco-grill Model DG-104(10mm) making shape and riveted with rivets and fixed with suitable channel complete necessary fixing arrangements etc.,completed and directed by Engr-In-Charge.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.all as specified and directed.

S&F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm

M & L for PVC (SWR) Floor trap / Nahani traps of 75 mm outlet plain with grating including jointing with solvent cement.

S & F 15 mm fancy type bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F Mild steel water tubes, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

S&F Mild steel water tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

S&F 1000 ltrs capacity potential moulded polyethylene water storage tank (cylindrical or vertical) hoisted and fixed in position including dismantling existing water tank all as specified in SSR Part I and directed.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints laid in floor.

S&F PVC (SWR) bend any radious 75mm dia including necessary scaffoling upto 5 storeyies all as specified.

S&F in repair PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints laid in floor.

S&F PVC (SWR) bend with access door 110 mm bore.

S&F PVC (SWR) gully trap 110 mm, setting with grating and jointing with solvent cement etc complete all as specified and as directed.

S&F PVC flexible pipe(wastepipe) suitable for 40 mm waste coupling.

M&L for precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in cover slabs and the like, set in cement mortar 1:6 with plain fair faces complete with joints to match all as specified and as directed.

S&F Hight strength, deformed steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.90mm dia all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 Cu.m, getting out, returning, filling in and ramming earth brokren rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil

S&F steel work in tubular posts and roof trusses including special shaped washer etc completed using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St-240 (S&F) completed all as specified and as directed by the Engineer-in-charge.

S&F Pre-Painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws as specied.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Removing building materials etc. (other than spoil payable under items -earthwork) to a distance of 5Km beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and as directed.

Preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a two coat of distemper oil emulsion on surfaces of walls.

M&L for preparation of new undecorated surface of wall and applying two coats of cement base paint.

Cutting opening in cement concrete walls/ stone wall/ brick wall (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc.

M & L Providig plain cement concrete type B1 1:2:4 (20mm graded agg) for fixing holdfast complete all as specified and as directed.

Supply and fix powder coating of any colour (thickness of powder coating not less than 50 micron) anodised aluminium partitions, with using aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading screws excluding Sheet glass of 4 mm thick and 12mm thick prelaminated Particle board etc including fixed with wall complete arrengement complete all as specified and as directed by Engineer-in-Charge. Note: Glass and prelaminated board will be measured and paid separately under respective item.

M&L for Formwork to sides flat rough finished of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M&L for Formwork to sides of rough finished surface of square concrete columns,

M&L for Reinforced cement concrete 1 : 1.1/2 : 3, type A-1 nominal mix, using 20mm graded stone aggregate as in column, pillars,piers, footings, posts and struts etc.

M&L TMT bars 8mm dia , cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9mm dia as in stirrups, spacers and binders.

M&L for 60mm thick machine pressed precast concrete interlocking coloured rubber moulded paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade laid over and including 50mm thick sand cushion all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in coping all as specified and directed .

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel shetting or other covering, running rails and guides) and hanging; also fastening and fixing complete with Fe 290 (Gde E-165) all as specified and as directed by the Engineer-in-charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing /Post made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and as directed by Engr-in-Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) 5 mm chain fixed with hooks (for poles) suitable arrangement all as specified and as directed by Engr-in-Charge.

Supply and fixing only 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sq. M in each pane

Supply and fixing 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including the like laid over cement mortar 1:4, 20 mm thick set and jointed in neat cement slurry and pointed in white cement with pigment to match including grinding and polishing complete

Material and labour for 8 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements)

M & L for Powder coated Aluminium door shutters, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, door closer hydraulically regulated,hinges,complete locking arrengement with key, anodized aluminum snap beading screws, etc complete all as specified and directed by Engg-IN-Charge

M & L Collapsible steel gates, top hung, consiting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, etc complete all as specified and directed by Engg-IN-Charge

M&L for 300mmx300mm of size and 20-22mm thick rubber moulded coloured chequered cement concrete tiles jointed with grey cement and pigment laid in floor over and including 20mm thick screed bed in cement mortar 1:6 all as specified and directed by Engr-in-Charge

Taking down carefully CI/MS/PVC sheet terminal box mounting in the wall including switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated hylam sheet top cover for housing switches, sockets, regulators etc. by disconnecting copper point wiring complete including and kept with safe custody and refixing the same on wall after tiling work on existing position and location and making good disturbed surfaces of wall roof etc if required complete all as specified and directed.

Material and labour earthing complete with galvanised steel earth plate electrode 600mm x 600mm x6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge earth plate at a depth not less that 1.5m below normal ground level connected to galvanised steel earth lead wire, 4mm dia by means of bolts, nuts, check nuts and washewrs of galvanised steel and connected to mainswitch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre- cast RCC (1:2:4) type B1 cover slab 54 cmx54cmx 5cm with one handle for lifting make out of 8mm dia MS bar, provision of funnel, wire mesh, 20mm bore galvanised steel tubing (med grade) for watering charcoal or coke and salt in alternate layers, 15mm bore galvanised steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 3 of SSR part-I.

Material and labour for dismantling carefully electrical connection and taking down Unserviceable Operation Threatre lights from existing Locations and deposit to MES store all as specified

Supply and fixing ceiling mounted LED operation theatre surgical light of intensity 140000 Lux +- 10% ,light field-12-30 cm ,colour temparature 4000-5000K, colour reduction Index 93a,LED life 50000Hrs,Number of LEDs 12x5,diameter of lights 500mm,brightness control Digital 9 steps,power supply 220v/50Hz Make Technomed model No TMI C 5 . make : Philips/Crompton greevs all as specified and as directed

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC conduit/casing capping of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated hylam sheet top cover for housing switches, sockets, regulators etc. complete for one light/ fan/bell point controlled by one single pole 5 amps switch all as specified and as directed.

(a)One light point controlled by one single pole 5 Amps switch

(b)One fan point controlled by one single pole 5 Amps switch

(c )One switch socket out let point 5 Amps on same board with other switches

(d)One switch socket out let point 5 Amps on independent board

Supply and fixing Piano type switch single pole 5 Amps one way 230 volts all as specified and as directed

Supply and fix socket outlet 5 pin, 5 Amps, flush type, universal complete all as specified and directed.

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 2.5 sq mm nominal area, passing through heavy grade PVC casing/capping conduit of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall , covered with 3mm thick electroplated hylam sheet top cover for housing 15 A switches, 15A sockets all as specified and as directed.

Supply and fixing switch 15A flush type universal pattern 230 v all as specified and as directed

Supply and fixing socket outlet 5 pin multi purpose 5/15 Amps flush type all as specified and as directed

Supply and fix ceiling rose surface bakelite 65x25mm, two to three termimals complete all as specified and directed.

Supply and fixing exhaust fan 300mm sweep working in AC single phase 900 RPM with louver shutter on wall with necessary fitting,bolt,nutsand washer connecting up with ceiling rose with 3 core flexible cable including necessary arrangement for making hole on stone wall and holding frame etc all as directed.Make Havells Model Turbojet SP or equivalent in Bajaj/Orient

Supply and fixing wall fan 3 blade 450mm sweep working in AC single phase fitted on wall including necessary arrangement on wall and holding frame fitting,bolt,nutsand washer connecting up with ceiling rose with 3 core flexible cable etc all as directed.Make Havells Model Airboll Hi-Speed or equivalent in Bajaj/Orient

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed.

Supply and fix miniature circuit breaker (MCBs) single pole, 240 volts, 10KA, 6 to 32 Amps C series complete all as specified and directed.

Supply and fixing suspension LED light fitting, 36watt classic styling with cutting edge technology to provide quality illumination and superior optical control. Use of direct/ indirect LED light engines makes it excellent choice for low heightceiling applications and areas where ceiling uniformity and indirect lighting is important (secondarysuspension kit included). including connecting up with twin core flexible copper conductor cable all as specified and as directed. Make: Havells Model LICONLP36WLED857SPCGRY or equivalent model in CROMPTON/PHILIPS/WIPRO/BAJAJ.

Supply and fixing wall fan 3 blade 450mm sweep working in AC single phase fitted on wall including necessary arrangement on wall and holding frame fitting,bolt,nutsand washer connecting up with ceiling rose with 3 core flexible cable etc all as directed.Make Havells Model Airboll Hi-Speed or equivalent in Bajaj/Orient

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed.

Supply& installation of open well submersible pump 5HP 3 phase of suction and delivery 50mm pipe size of head range 13.5-36 mtr complete all as specified and directed. Make Crompton Model OWNH52 5HP or equivallent type of CRI/V-Guard/ Kirloskar

S&F for Submersible cable flat copper three core 6 Sq mm complete all as specified and directed.

Supply and Fix GI tubing light grade 50 mm bore for cable protection all as specified and as directed

Supply and Fix GI tubing medium grade 50 mm bore all as specified and as directed

Supply and fix in gun metal gate valves 50mm with iron wheel head screwed both ends for GI pipe all as specified

S&F Fully Automatic Star-Delta Starter (ASD) 5 HP including Sheet metal encloser all as specified and directed

M & L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip of size 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion all as specified Note : All earthing strips should be welded or brazing at each joint .

Supply and laying sub main wiring with four single core PVC insulated cable with copper conductor multistranded 1100 volts grade 6.0sqmm in and including heavy grade PVC casing and capping/PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 6 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed.. Note : One run of earth continuity conductor and four run of copper conductor together taken as one length for measuring unit length.

Supply & fixing of sheet metal enclosure MCB DB double door type 230v with 4 ways SPN suitable bus bar model inrepalcement of old unserviceable DB all as specified and directed

S & F MCB TPN of 63A,'C' curve, 10KA rupturing capacity all as specified and as directed.

Supply and fixing of triple pole and earth enclosure with a three pin and earth plug and socket complete with triple pole 32A MCB ,C curve , 10KA 415v with metal clad top as all as directed.

M & L sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 1.5 sqmm in and including heavy grade PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 4 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

S & F MCB SPN of 40 to 63A,'C' curve, 10KA rupturing capacity all as specified and as directed.

S&F XLPE insulated armoured heavy duty screened PVC bedded galvanised steel strip armoured electric cable (LT)1100 volts grade with stranded aluminium conductor of cross sectional area 4 sqmm 2 core and connection with LT panel using required lugs, cable glands all as specified and directed.

M&L for cable protection GI tubing light grade fixed along the pole/under road/along the wall of size 50mm bore with necessary clamps all as directed.

Labour for drilling hole under the road with the help of bocki / by manual or by machine for crossing GI tubing of any size for cable protection all as specified and directed by EIC.

Supply and lay brick common burnt sub class "B" old size and for protection of cable laid in trenches for under ground cable all as specified.

M&L for ordinary sand cushioning 8cm thick below the cable & 15cm above the cable and punned down to 10cm from top of cable complete all as specified. Total spread thickness shall be 23 cm and measured 18 cm compacted thickness for payment).

Supply and fixing LED lights fitting 1xDecorative gate light made up of high grade unbreakable polycarbonate material suitable for 20 W LED lamp B22 base.connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Havells Model LHFOGAE1T11F015 or equivalent crompton/philips/Surya

Supply and fixing electronic fan regulator socketed step type upto 100 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm. make : Anchor/Crompton greevs all as specified and as directed

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix sheet metal enclosure double door type for DBs for mounting of MCB for 240V, 4 way with 200 Amps rated Bus bar, single pole & neutral complete all as specified and directed.

Supply and fix miniature circuit breaker (MCBs) single pole, 240 volts, 10KA, 6 to 32 Amps C series complete all as specified and directed.

Supply & fix ceiling fan complete and with all accessories including rod of required length except fan regulator 230 V,1200 mm sweep. BEE 5 star rated Make Orient,Crompton, Bajaj, Havells ES NEO

M/S Suresh Raju