SUPPLY AND INSTALLATION OF 01 NUG BIG SIZE STEEL YATRI SHED AT PUBLIC PLACE IN BLOCK PATIYALI VILLAGE BAHADURNAGAR KASGANJ FOR D.R.D.A KASGANJ U.P.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 all kind of soil.

Excavating ,Supplying , stacking and filling of local earth (including royalty ) by mechanical transport upto a lead of 1 km also including ramming and watering of the earth including all complite .

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method by rotavator at OMC and compacting with smooth wheel roller to achieve the desired density complete as per Technical Specification Clause 401.

1:4:8(1 cement : 4 coarse sand (Zone III ) derived from natural sources : 8 graded Stone aggregate 40mm noinal size derived from natural sources etc. as per s.o.r-275b

Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in foundation and plinth in 1:4 (1cement :4 coarse sand )as per s.o.r-307

12mm Thick cement Plasterof mix 1:43(1 cement :3 coarse sand ) as per S.0.R.NO. 583

Supply and filling of 80 mm thick interlocking rubber moulded tiles…..complete item.s.i new item.

S/F Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars (s.o.r-504)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)10.28 AS PER DSR NO.

16.60 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 16.60.1 Overhead informatory road signage