WBPWD/SEWEC /BED /NIQ-57/2024-25

Amount

SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd.

[Make: OTIS/KONE/ SCHINDLERs/ Electromec / LT Elevator/United Elevator /Escon / Thyssen Krupp /Bharat Elevator Co. Ltd/ Engineers Vertical Services/Mukherjee Service Agency/ Johnson / Other makes those have credential in Govt. Sector.)

Type: Passenger Lift .

Load : 8 Passenger / 544 Kg

Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF)Simplex Collective Control

Machine:- Energy efficient machine, Gearless Machine Room

Position of Machine Room: Directly above the Lift shaft

Speed: 1 Mtrs./ Sec

Floor served: Ground Floor to 3rd Floor ( G,1,2 3) 4 Stops, 4 Levels, 4 Openings

Landing: 4, all on same side

Total Rise : 13.80 Mtr (Approx) (Bidder should visit the site)

Signals:- Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button with braille. Button : All buttons on car & landing shall be luminous & encoded with braille on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendent mode of operation. Display type: Monochrome/Colour LCD/Segmented LCD/ Scroll. Operation Push Buttom for lift maintenance & service should be on top of the car.

Leveling accuracy:±5 mm(Micro levelling arrangement)

Car inside :1200 mm Wide x 1400 mm Deep x 2200 mm Height or As per manufacturer's standard conforming to IS

Car Entrance : clear inside1200 mm Wide x 1400 mm Deep x 2200 mm Height protected with car door

Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail.Mirror Finish & Rear side Glass.

Lighting: LED Lighting Inside the Car

Car Ventilation: Pressure fan with anodised aluminium grill.

Car Flooring : Car flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order).

Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system

Landing Door: Stainless steel centre opening automatic door provided with V3F controlled door drive system

Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor

Indicators: Car & Landings: Direction & Position Indicator Display

PROTECTIVE DEVICES & OTHER ACESSORIES

ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others.

Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio display indication

Emergency lighting in car: Battery operated emergency lighting in the lift car.

Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room

Emergency Alarm: Battery operated alarm bell system in lift car and control room

Fireman switch:Fireman switch at main landing terminal.

Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.

Main rope - Belt Type or As per manufactures's standard conforming to IS.

DIMENSION OF SHAFT & POWER SUPPLY

Available Shaft Dimension: 2750(W) mmX 1750 (D)mm

Pit Depth : 1600 mm (Bidder should visit the site)

Overhead : 4500 mm (Bidder should visit the site)

Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS

8 Person Passenger Lift with Machine room and having specification same as above with additional features as per PWD Act 1995 ( As per attach Annexure-I)

N.B. Bidder should see the "actual physical well size '' and no extra cost will be paid for additional fabrication of angle iron structure, iron clamp or any other mechanical works. Rates should be quoted with Minor Civil work (i.e Chieseling inside the lift well ,necessary pocket cutting, making hole on machine room floor etc. incl mending good the damages should be made by the respective agency.

Escon Elevators Pvt. Ltd. (BID ID -5530190)

BHARAT ELEVATORS AND ENGINEERS PVT. LTD. (BID ID -5537528)

L. T. ELEVATOR PRIVATE LIMITED (BID ID -5548417)