REPAIRS TO FLOOR DADO PLUMBING SANITARY FITTINGS AND MISC WORK IN CERTAIN BLDGS OF 21 CGSR 755 TPT COY 436 COY ASC CTO COLONY ENGR REGT FD WKSP FD HOSP AND HRDC AT BAIRAGARH UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down chowkhats or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete including lugs with out glazing bars, dovetailed or welded complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and peg stay, complete with wire gauzed bar, dovetailed or welded complete all as specified and directed.

S&F 30 mm thick, 2nd class hardwood, glazed and skelton window shutters, open rebated and preparaed to receive glass, gauze, etc. (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitread beads for secruing glass, etc; sizes of memebers of shutters as specified in SSR Part I, section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed.

S&F Mild steel conforming to Fe-290 Gde E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed.

S&F factory made steel ventilator with top hung shutters including hinges with fixed type MS handles peg stay and tower bolt but with additional sash bars MS flats for fixing of wire gauge complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in pane complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing, complete all as specified and directed.

S&F 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

S&F 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

M&L cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frames of pressed steel and in bed blocks and like etc complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core 30 mm thick (style) with 2,4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face complete all as specifed and directed.

S&F factory made PVC moulded shutter but wire gauzed i.e. Panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly complete all as specifed and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F 200 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed

S&F 150 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed

S&F 300mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed

S&F 100 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type complete all as specified and directed

S&F in repairs 20mm dia curtain rails, mild steel, chromium plated ornamntal with fixing brackets, stops rollers etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified Dark shade flooring tiles 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, laid in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-25mm thick (size not less than 450mm x 600mm) with and including 20mm thick cement screed base in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, etc with and including 10mm thick rendering in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

M/L for Non skid ceramic/Ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors/skirting over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed

M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 300mm x 450mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick screed in CM 1:4 complete all as specified and directed. [MAKE:-JOHNSON ENDURA or equivalent in SOMANY/ KAJARIA/ORIENT/ make as per Appx 'C' as approved by GE]

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above glround level) complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, filling, subbase and mass concrete complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, moulding and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick/concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 20mm thick on faces of brick or concrete surfaces(External surfaces) shall be done in two coats comprising cement and sand mortar (1:4) 5mm thick mixed with water proofing compound @ 3% by wt of cement over a backing coat of cement and sand mortar(1:4) 15mm thick and finished with trowel to an even and smooth surface without using any extra cement complete all as specified and directed by Engr in Charge. (Note :- Water Proofing compound shall be measured and paid seperately)

Supply Only Integral water profing compound complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cm 1:6 complete all as specified and directed.

M&L for preparation of new surface of plaster and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of Oil emulsion distemper over a coat of white putty complete all as specified and directed. Note :- Putty shall be measured and paid seperately.

M&L for complete removal of existing treatment from walls and applying two coats of Cement base paint complete all as specified and as directed.

M&L for applying 3mm thick wall care putty complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 litres capacity, ISI marked, white, with all fitting and fixtures including brackets, PVC connection of 450mm long and 32 mm bore PVC flush pipe, complete all as specified and directed. [MAKE:- SOMANY (Cat No.121002), Prayag (Cat No.501 Smart flush cistern) or equivalent in PARRYWARE-SLIMLINE/CERA/ make as per Appx 'C' (list of make) as approved by GE]

S&F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8306) or equivalent in MARC/ JAQUAR/ make as per Appx 'C' (list of make) as approved by GE]

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8302) or equivalent in MARC/ JAQUAR/ make as per Appx 'C' (list of make) as approved by GE]

S&F in repairs 15mm bore stop cock, cast copper alloy chromium plated with long shank and cup (concealed type) screwed down , screwd for iron pipe or union and fixed in repair complete as specified and as directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified & directed

Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs Vitreous china squatting pan ‘Orissa’ pattern, ISI marked, size 580 x 440 mm, white with integral foot rests including provision of cement concrete bedding & ‘P’ or ‘S’ trap complete all as specified and directed. [MAKE:-SOMANY (Cat.No.121115), PRAYAG (Cat No.4055) or equivalent in CERA/PARRYWARE/ HINDWARE/ make as per Appx 'C' as approved by GE.]

S&F in repairs Vitreous china wash basin, ISI marked, white, flat back, size 550 x 400mm, including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. [MAKE:-SOMANY (Cat No.110107) or equivalent in CERA/PARRYWARE /HINDWARE as approved by GE.]

S&F Vitreous China Oval shaped counter top Wash Basin, white, flat back, Size 550x400mm / std size including waste pipe, coupling, PVC pipe connection 15mm dia 600mm long complete all as specified and directed.

Taking down existing roof treatment on roof slab, parapet etc complete all as specified and directed

M&L for Water proofing treatment on roof surfaces with APP modified membrane with non woven polyester reinforced, weight not less than 3 KG/SQM and thickness of membrane not less than 3mm (plain/ thermal insulation with white mineral/gravel finish on upper side of membrane as per site requirement as directed by Engr in Charge) uniformly embedded during manufacturing process laid in following sequence complete all as specified and directed.:- (a) Applying 10mm thick plaster in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on cleaned roof surface.(Plastering shall be measured and paid under item No 63.00 here in after) After properly curing of the plaster, the roof will be tested for water tightening by ponding with water for seven days for any seepage/leakages, etc. If any seepage/leakage is observed the rectification will be carried out by pressure grouting under pressure of 5 Kg/sqcm using cement based grout. After the roof surface is repaired, the slab /roof will be again tested for water tightness before proceeding for further treatment. (b) Properly cleaning and drying of the plastered roof surfaces, parapets, gutters, drain mouths, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting. Proper grooves shall be cut around CI drain outlets/pipes/chimney pipes and other similar situations to tuck in the treatment. (c) Applying a coat of bituminous primer conforming to IS: 3384-1965 @ 0.3Kg/Sqm on the prepared surface till the surface is properly impregnated. (d) Laying APP modified water proofing membrane with 100mm overlap in longitudinal direction and 100mm overlap in transverse direction sealed and bounded to the surface by torch application method. (e) All joints and changes in direction should be curved with cement mortar 1:3 with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. A fillet of PCC 1:2:4 type B0 using 12.5mm graded stone aggregates shall be provided at all junctions of vertical and horizontal surfaces and wherever there is change of direction.

M&L for 10 mm thick plaster in CM 1:4 mixed with using integral water proofing compound @3% by weight of cement applied over roof slab complete all as specified and directed. (Water proofing compound shall be measured and paid seperately)

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber rings joints fixed to walls with clamps and brackets complete as specified and directed.

M&L for 75mm dia PVC (SWR) floor trap plain with CP grating including jointing with solvent cement complete as specified and directed.

S&F in repair 100mm dia CP grating complete as specified and directed.

S&F PVC (SWR) pipe bend of 75 mm bore complete as specified and directed.

S&F PVC (SWR) junction single, (SingleT) equal or unequal of 75 mm bore complete as specified and directed.

S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm dia complete as specified and directed.

S&F in repair 110 mm bore PVC (SWR) vent cowl complete as specified and directed.

M&L for Hardcore of broken stone or boulders of quage n exc 63mm, deposited, soread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete as specified and directed.

Dismantling structural steel work including purlins, tursses etc. complete as specified and directed.

S&F mild Steel work in tubular/structural trusses, purlins, mild steel plate etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 or steel sections conforming to Fe 410-W (Gde E-250) quality -A complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL/ make as per Appx "C' as approved by GE]

S&F Pre-painted galvalume aluminum zinc coating GI based profile steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL / make as per Appx "C' as approved by GE]

S&F in repairs Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size:- 430mm x 510mm x 203mm, bowl size:- 430mm x 380mm x 203mm, including CP waste coupling and 32mm dia PVC waste pipe of suitable length complete all as specified and directed.. [MAKE:- Prayag (Cat No.1218D Gloss) or equivalent in Blue star/ Nirali/ make as per Appx 'C' (list of make) as approved by GE]

S&F 6mm thick asbestos cement corrugated sheets in roof fixed with J type hooks and bolts complete all as specified and directed.

All as per item No 81.00 above but except sheets, complete all as specified and directed.

S&F Asbestos cement two pieces serrated ridge for corrugated or semi corrugated sheet complete all as specified and directed.

M&L for 12mm thick prelaminated particle board both sides with decorative choice lamination fixed with screws complete all as specified and directed.

M&L for Extra over item of block board or veneered particle board for external teak wood lipping, 6mm thick, fixed with nails complete all as specified and directed.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) 30 mm complete all as specified and directed.

Disconnecting of existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position capacity of tank exc 1000 ltr & n. exc 2000 ltr. complete all as specified and directed. Note :- Rate inclusive of temporary connection for supply of water to all qtrs

Preparation of old decorated surfaces of wall including brooming, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and M&L for applying one coat of exterior weather proof water base emulsion paint on wall all as specified and directed. [MAKE : ASIAN (ACE) /SHALIMAR (SAKTIMAN) /BURGER (WALL MASTA)/ Equivalent in make as per Appx 'C' list of make] Note : Quoted rate shall be deemed to include required scafolding up to 12 m height.

Preparation of old decorated surfaces of wall including brooming, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and M&L for applying two coat of exterior weather proof water base emulsion paint on wall all as specified and directed. [MAKE : ASIAN (ACE) /SHALIMAR (SAKTIMAN) /BURGER (WALL MASTA)/ Equivalent in make as per Appx 'C' list of make] Note : Quoted rate shall be deemed to include required scafolding up to 12 m height.

S&F in repairs vitreous china wash down water closet pan, pedestal pattern, ISI marked, white, including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. [MAKE:-SOMANY (Cat No.120403 & 120404)/ Prayag ( Cat No 4016) or equivalent in CERA/PARRYWARE /HINDWARE/ make as per Appx 'C' list of make]

S&F in repair health faucets CP with 1.2mtr long CP flexible pipe complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-18) or equivalent in JAQUAR / PLUMBER / MARC/ make as per Appx 'C' list of make]

S&F in repair brass mortice lock 4 levers vertical type size 100mm complete all as specified and directed.

M&L for water proofing treatment to sunken surfaces of slab in following sequence complete all as specified and directed :- (a) Slope correction by providing PCC 1:1.5:3 using 12.5mm graded stone aggregate, average thickness 25mm, mixed with integral water proffing compound "DITCHTMENT DM' manufactured by Dr fixit Pidiproof LW + of M/s Pidilite Industries or STP No 1 (Liquid) of M/S STP Ltd as approved by GE, in proportions as suggested by manufacturer. (b) Applying evenly a priming coat of bituminous primer confirming to IS 3384 @ 0.7 Kg per Sqm on prepared surfaces. (c) Applying evenly a coat of hot blown bitumen of grade 85/25 @ 1.5kg/sqm on the primer surfaces. (d) Laying 150 micron thick black polythence film on the suface with 10mm overlaps sealed and bounded the surface. (e) Applying evenly a coat of hot bown of grade 85/25 @ 1.5 kg per sqm on the surfaces. (f) 48 hrs testing of treatment for water thightness by ponding of water.

M&L for 50 mm dia UPVC pipe as in water spout at the lowest point of sunken floor with 600 mm projection beyond the outer face of the wall with outer end cut in chamfered angle for easy drain of water complete all as specified and directed.

S&F in repair 32mm bore PVC waste pipe for kitchen sink/ WHB one mtr long complete all as specified and directed.

S&F in repair 40 mm bore PVC waste pipe for kitchen sink one mtr long complete all as specified and directed.

Taking down aluminium doors n.exe 4 sqm each and refixing in same position after carry out necessary repairs including replacing rubber/ aluminium beading and jointing cleats, tightening if required including making good existing surface complete all as specified and directed. Note :- Any aluminium style, rail, frame, floor spring, hydrulic door closer if required to be replaced will be measured and paid seperately under respecective item.

Supplying, fabricating and fixing powder coated (minimum thickness 50 micron) aluminium sections of required size for door, windows, ventilators frames and shutters and partitions including aluminium hinges of required size jointing cleats, screws sash fasteners, plug for fixing with walls, columns, etc complete all as specified and directed. [MAKE: JINDAL/ AJIT INDIA/ HINDALCO] Note :- Rates are inclusive of necessary new fitting for door/ window i.e handle, tower bolt, butt hinges etc.

S&F in repair Floor door stopper 150mm long of aluminium ally body and tonge, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs door closer aluminium hydrolically regulated designation No 3 universal type, suitable for doos shutters of 851mm to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

M&L for Providing cement concrete type B0 1:2:4 (12.5 mm graded aggregate) mixed with water proofing compound @ 3% by wt of cement in benching, roof kerbs of mud stops, rounded or chamfered on edges, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing (Note :- Water Proofing compound shall be measured and paid seperately)

M&L for Factory made, machine pressed, M-40 grade concrete interlocking paver blocks (glossy/reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 80 mm thickness with & including 50 mm thick sand cushion and joints filled with sand complete all as specified and directed.

Dismantling of wall and ceiling boards (Fibre, Pulp, Insulation etc.) or insulation board/slabs/blankets, any thickness including cover fillets complete all as specified and directed.

M&L for galvanised cold rolled steel section framework of size 600 x 600mm grid size using 24x38x0.50 (composite thickness) tee (bottom pre coated) & 24x24x0.50mm (composite thickness) wall angle including suspenders as per manufacturer’s instructions complete all as specified and directed. [Make: GABSON (Gabsec) or equivalent as per Appx 'C' list of make as approved by GE]

S&F asbestos free calcium silicate board of size 600x600x6mm, fixed to steel frame work in ceiling with & including applying two coats of oil bound distemper complete all as specified & directed. NOTE:- Cost of making frame work for light fittings, etc is deemed to be included in the quoted unit rate

M&L for filling cracks with polymer based chemical (Dr fixit cracks shrink free) for cracks not exc 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonary including scaffolding etc complete all as specified and directed. Make:- Dr fixit /Berger / Pidilite or equivalent as per Appx 'C' list of make as approved by GE

Dismantling water tanks exc 500 ltr cap & n.exc 1000 ltr cap of any size or capacity and removing to store complete all as specified and directed.

S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed. [MAKE:-SINTEX/ POLYWELL/ POLYCON/POLYPLASTor equivalent in make as per Appx 'C' (list of make) as approved by GE]

S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed. [MAKE:-SINTEX/ POLYWELL/ POLYCON/POLYPLASTor equivalent in make as per Appx 'C' (list of make) as approved by GE]

S&F in repairs Ball brass valves of bore dia 20 mm dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for Providing precast reinforced cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate in louvers and jallies 35mm thick (measured solid) including all mouldings but excluding frame and set in cement mortar 1:4 complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F factory made Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, both face covered with decorative face veneers with lipping/frame to match complete all as specified and directed.

M&L for factory made second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 25mm thick Cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate in sub base, floor finishes complete all as specified and directed.

M&L for Joint free non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Preparation of newly plastered surfaces of wall and M&L for applying one coat of exterior weather proof water base emulsion paint on wall over a coat of white cement based putty, complete all as specified and directed. [MAKE : ASIAN (ACE) /SHALIMAR (SAKTIMAN) /BURGER (WALL MASTA)/ make as per Appx 'C' (list of make) as approved by GE]

Complete removal of existing treatment on walls (any number of layers) by scrapping including filling holes, cracks, depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coats of exterior water base emulsion paint, white or tinted complete all as specified and directed. [Make:- ASIAN (ACE) /SHALIMAR (SAKTIMAN) /BURGER (WALL MASTA) / make as per Appx 'C' (list of make) as approved by GE]

M&L for Complete removal of existing treatment from walls and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and as directed. Note: Putty shall be measured and paid for seperately under respective item.

S&F in repairs Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm size with swivel joints complete all as specified and directed. [MAKE:- Prayag (Cat No.BS-73) or equivalent in JAGUAR/CERA / make as per Appx 'C' (list of make) as approved by GE]

S&F in repairs Vitreous china urinal half stall ISI marked, white, with & including chromium plated waste coupling including connections to flush pipe and outgoing pipes complete all as specified and directed. [MAKE:-SOMANY smart / HINDWARE (Cat No.60002 starwhite) or equivalent in CERA/PARRYWARE/ make as per Appx 'C' (list of make) as approved by GE]

S&F in repairs tubular towel rail of aluminium anodised, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. [MAKE:- Prayag (Cat No.BA-40) or equivalent in JAQUAR/MARC/ make as per Appx 'C' (list of make) as approved by GE]

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, laying of pipes etc and getting out in hard/dense soil complete all as specified and directed.

Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

M&L for Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed. (Note:-Reinforcement to be measured separately).

Demolition and breaking up drain pipes (SGSW, AC, RCC or PVC) set in cement mortar and disposal of unservicable materials and rubbish to a distance not exceeding 100m complete all as specified and directred.

S&F 150mm bore Salt glazed stoneware drain pipes, grade ‘A’, laid in trenches and jointed as specified complete all as specified and directed.

M&L for Concrete bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tasted; in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and directed.

S&F Mild steel work conforming to Fe-290 Gde E-165 angle iron, flat iron, MS plate as in bracket, cleats, fasteners, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed., drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

S&F 5.5 mm thick (black tinted) glass and glazing with oil putty/ aluminium beads in square complete all as specified and directed

S&F in repairs prelaminated partcle board 19 mm thick, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed.

M&L for second class hardwood plain fillets, square, rectangular in section exc 13 sqcm but n. exc 25 sqcm, clean swan, secured with nails and fixed, complete all as specified and directed.

S&F100mm hasp and staple, safety type, anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy /reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick sand cushion and joints filled with sand complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 66,760.00

M/S vikas jain

Nakoda Constrcution Company

M/S RAKESH TRADERS

anil kumar sahu

POONAM ELECTRIC INDUSTRY