PROVN OF SHED AT SAND MODEL AREA WITH 01 CLASS POST AND PROVN OF CHAIN LINK FENCING WITH 01 MS GATE ALONGWITH SECURITY LIGHT SURROUNDING THE BLDG NO T 285 BN MAG OF 8 KUMAON AT RHENOCK UNDER GE 867 EWS

Amount

Excavation in post holes (or similar holes) each not exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering, and removing surplus soil to a distance not exc 50mtr and making good surface in soft/loose soil.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out in Soft/ loose soil.

Returning filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil.

Removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point in soils.

M&L PCC Type C2 (1:4:8) (40 mm graded aggregate) in foundations, filling and mass concrete.

M&L for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in foundations, fillings and mass concrete all as specified.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks exc 10cm in width and setting in CM (1:6) complete all as specified and directed.

M&L broken stone or bounders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick , watered and rammed to a floor/true surface.

M&L for 75 mm thick PCC (1:4:8) Type D2 (using 40 mm graded aggregate) as in sub base of floor.

M&L for 40 mm thick PCC (1:2:4) Type B1 (using 20 mm graded aggregate) as in floor fininsh.

M&L 38 mm wide glass dividing strips 3mm thick as in floors.

S & F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. in Fe-410-W (Gde-E-250) quality-A all as specified.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M & L preparation of steel and iron surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome complete all as specified and directed.

M & L 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6) on internel wall complete all specified and directed.

M & L 15mm thick rendering on fair faces of brick work concrete surface in CM (1:4) with water proofing compound. (Note : Water proofing compound will be measured and paid separately)

Supply only integral water proofing compound complete all as specifeid and directed.

M&L for preparing newly plaster or untreated plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of cement base paint over one coat of priming coat with alkali resistant primer complete all as specified and directed.

M&L 75 mm thick PCC type C-2, (1:3:6) (40mm graded stone aggt) as in path, plinth protection etc., complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

M & L chequered cement concrete tiles 250 x 250 x 25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments over and including 15 mm thick screed bed in CM (1:6) all as specified and as directed.

S&F MS steel work with angle iron , flat section as in posts and struts in fencing ,fillets, plates etc including cutting tops to shape as directed drilling holes, notching for wire etc; including all necessary drilling, bolting or riveting etc; complete conforming to Fe 290-0 Gde -E-165 all as specified.

S & F of mild steel screw bolts (Machine made) with hexagonal or square heads at one end and scred the others or screw ends each screwed end to be fitted with washers and one hexagonal or square nuts 11 to 15 mm dia of neck, not exceeding 5 cm long complete all as specified .

Supply only chain link fencing MS galvanised fencing 75 x 75 mm mesh and not less than 4mm dia complete all as specified.

Fixing only chian link fencing including line wires, any mesh, size and type to any type of standareds, rails, straining bolts etc, including provision of binding wire complete all as specified.

S&F galvanised 2 stand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standards rails straining bolts,including securing or typing at crossing with and provision of galvanished mild steel wire, stapled or steel pins, etc as directed (each line of wire to be measured).

M & L for MS round bar, 10mm dia, conforming to Fe 290-0 Gde E-165 as in line wire to chain link fencing complete all as specified.

M & L for preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of black japan paint complete, all as specified.

M & L for preparing new steel surfaces of any descripation not exceeding 10cm width or girth and applying, two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L for Reinforced Cement Concrete (nominal Mix) 1:2:4 type B1 (20 mm graded aggregate) as in foundations, including rafts,footings, foundation beams, bases for columns, etc.fcomplete, all as specified.

M & L for Reinforced cement concrete (Nominal Mix) 1:2:4 Type B 1 (20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns for flat rough finished surfaces of concrete complete, all as specifed.

Use and waste of formwork to sides of square, rectangular or polygonal pillars, posts struts, piers, columns, for rough finished surfaces of concrete complete all as specified.

M & L mild steel TMT bar, 10 mm dia and over as in reinforcement cut to length, bent to shape required, including crankin bending spirally for hooping, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to FE- 500-D complete all as specified and directed.

M & L mild steel TMT bar, 5 to 10 mm dia as in reinforcement for stirrups and binder cut to length, bent to shape required, including crankin bending spirally for hooping, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to FE- 500-D complete all as specified and directed.

M & L for mild steel framed work such as grills, gates, etc with ends of bars shouldered and/or riverted or forged into spikes: framed guard bars with Fe 290 Gde E 165 complete, all as specified and directed.

M & L mild steel sliding door bolt 300mm long, plate type, stove enamelled black,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts , four on bolt plate and two on staple and fixed to gate complete all as specified and directed.

M & L Glazed ceramic colour tiles in vertical surface of pillars, size 450x350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile over and including 10 mm thick screed bed or bedding layer in CM (1:4) finished even and rough complete all as specified and directed.

M/L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 3.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 3.0 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly for One light point or one fan point controlled by one switch complete all as specified and directed.

All as per item No 42 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board.

All as per item No 42 here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.

Supply and fix switch piano flush button, single pole, 5/6 amps, one way all as specified and as directed. Make : Anchor/Havells/Plaza

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type all as specified and as directed.

Supply and fixing switch socket combination 2 – in – one 6 Pin , 5 / 16 amps flush type universal all as specified and as directed.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F 9W LED Bulb suitable for B22 holder . System Efficacy should be > 85 lm/ W. PF > 0.9, The Lamp Should have Cool Daylight Color temp of 6500K, lumen output >800 lm complete all as specified and directed.

S & F lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting.

S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 4 way 240 Volts AC. Cat Part No 5076 11 of Make- Legrand or equivalent in Siemens/Schindler.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. Cat part No 4086 18 of Make : Legrand or equivalent in Siemens/Schneider.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 To 32 AMP poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. Cat part No 4086 18 of Make : Legrand or equivalent in Siemens/Schneider.

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25/16 mm PVC cashing & capping medium grade ISI marked and conduit junction boxes, terminal boxes and incl all accessories fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size cashing & capping with accessories shall be measured as one length.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1 : 3 : 6 ) type C-1 , 50 mm thick pre cast RCC (1 : 2 : 4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.

Supplying and fixing 4 sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.

S&F 1100 volt grade heavy duty PVC insulated stranded aluminium conductor cable of cross-sectional area 10 sqmm size (one twin core cable flat or circular served with inner sheathing of PVC tape and overall PVC sheathed) in service connections, suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire and testing on completion complete all as specified and as directed by the Engr-in-Charge.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm 3 core complete all as specified and directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and laying DWC cable duct pipe of size 50mm dia confirming to IS : 16205 Part-24 for laying of LT cables etc. complete with all accessories all as specified and directed.

M & L for junction box hot press moulded SMC of size 295 x 195 x 100mm with locking arrangements consisting of necessary suitable arrangements for incoming & out going cables with cable glands & having TPN connector 100A amps capacity, one no MCB SPN 10A for out going with necessary base insulator and including necessary flat iron clamps with nuts, bolts & washers all as specified and directed.

Note : In case of doubling / duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment

PRASAD PRADHAN AND SON (BID ID -3346313)

MS MAYA PRAKASH GOEL AND SONS (BID ID -3346318)

DEEP CHANDRA JOSHI (BID ID -3346335)

GYANENDRA THAPA (BID ID -3346308)

MANOJ JINDAL (BID ID -3346330)

SANJAY MITTAL (BID ID -3346309)

M/S JAYSHREE CONCERN (BID ID -3346331)