SPL REPAIR TO EM INSTALLATION AT STATIC WKSP AND ASC DEPOT AND CONNECTED ITEMS UNDER GE (AWC) MHOW.

Amount

Taking down old unserviceable ACSR conductor from LT/HT over head line ( including LT street light feeder ) earthing wire complete all as specified and as directed.

Taking down old rusted unserviceable Cross arms complete all as specified and as directed.

Taking down / dismantling insulators any type any size complete all as specified and as directed.

Taking down old unserviceable Panel complete including electric connection all as specified and as directed.

Supplying, laying, fixing, jointing and testing LT under ground XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 10 Sqmm x 2 Core, IS 7098 marked, with electric connection lugs, laid in trenches/under floor or fixed naked with walls / on poles/ in ducts / in GI pipes etc. and including taking down complete all as specified and directed. Note - Excavation, earth work, sand cushioning, PCC cover and GI pipe shall be measured and paid separately. Make :- Gloster/RR Kable/ RPG (Asian) / KEI / Havells

Description same as per Sl. Item No. 05.00 above but 16 sqmm x 2 Core

Description same as per Sl. Item No. 05.00 above but 16 sqmm x 4 Core

Description same as per Sl. Item No. 05.00 above but 50 sqmm x 3.5 Core

Description same as per Sl. Item No. 05.00 above but 70 sqmm x 3.5 Core

Description same as per Sl. Item No. 05.00 above but 95 sqmm x 3.5 Core

Supply and laying GI pipe 'light grade' 40 mm in trenches, under floors, roads, along poles for protection of cables with all necessary fittings and sealing ends complete all as specified and directed. Make:- Jindal, Prakash Surya, Tata

Description same as per Sl. Item No. 11.00 above but GI pipe 'light grade' 50 mm

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for laying of cables, pipes etc. and getting out all excavated material in any type of soil complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance not exc 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

M&L of locally available river sand in trenches below and above / around UG cable for cable protection, in duct under & above the cables including punning around cable complete all as specified and directed. Note - Punned thickness shall only be measured and paid.

Supply and laying unreinforced PCC Cable protection cover, class LV, type-1 flat with size 250 x 150 x 40 mm laid flat width wise complete all as specified and directed.

M & L for cutting of existing road / hard standing for laying of cable and repair the same after laying of cable complete all as specified and directed. Note: GI tubing shall be measured and paid separately.

Trimming / lopping of tree branches touching LT/HT OH lines not exceeding 30 cm girth, shrub, vegetation, bushwod and saplings at least upto 2 mtr from outer edge of ACSR including removing of braches of trees etc. to a distance exceeding 100 mtr and not exceeding 150 mtr complete all as specified and directed. Note :- (i) Linear length centre to centre of the poles shall only be measured. (ii) Shutdown wherever required shall be taken from Engr-in-Charge.

Supply and spread 40 mm graded crushed stone aggregate around the four pole of sub stations complete all as specified and directed.

Material and labour for preparation of steel surface of any description for painting of fencing posts, MS flats, MS welded mesh inside or out side power house or sub stn with two coat of synthetic enameled paint over a coat of red oxide primer all as specified and directed.

M&L for PCC1:4:8 type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L PCC 1:3:6, type C2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed

M & L Machine pressed precast concrete interlocking pavar block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed.

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in old filling of stone aggregate and Screening/segregating incl spreading material complete for four pole/sub stn or for making path way complete.

M&L for spraying chemical (Glycel /roundup and chemical composition Isopropyl amine salt of glyphoeate a.i.-40.60%, surfactant inert polyoxy ethylene amine 15.00 % & manufacturing Impurities 4.00% ) on area to remove unwanted vegetation / grass at various locations as directed by Engr-in-Charge. Notes - 1. Labour and equipments to spray chemical on required area are inclusive in quoted rates. 2. Spray will be repeated quarterly or as per the directions of Engr-in-Charge.

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth strip of size 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate no. 3 of SSR Part - 1, connected to earthing test point and complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) earth chamber, RCC 1:1.5:3, type A-1 cover slab, 40 mm thick reinforced with 6 mm dia TMT bar @ 150 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

Supply and laying Aluminium strip 25 X 4 mm main earthing lead complete all as specified and directed.

Supply and laying Galvanised strip 32X 6 mm main earthing lead complete all as specified and directed.

Supply , installation , testing and commissioning in replacement of LT PANEL board outdoor type of suitable size Kiosk type factory assembled fabricated (CPRI APPROVED) and of suitable size angle iron, channel and MS sheet 3 to 3.15 mm thick (inner compartment is 2.0mm thick) double door type , front and rear openable with locking arrangement and indepent duly prewired with colour code three phases and netural aluminium bus bar 200 Amps for 415 volts, 50 Hz electric supply with and including suitable sizes of cable glands for incoming and outgoing cables , cubical type duly powder coated over a coat of primer , grouting of panel 60 cm above the ground level by angle iron frame bottom of panel 40x40x5 mm thick , welded on all four corners , embedded in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate upto 30 cm and,grouting the panel board on and including suitable size foundation with the following components complete all as specified and directed . INCOMING:- (a) MCCB 160 amps 4 pole 35KA 415 volts (incoming) – 01No (b) Digital type voltmeer 0-500 volts. (c) Digital type Ammeter with CT of suitable ratio for reading upto 200 amps load-01 Set (d) Indicating lamps R,Y& B -01 set OUTGOING:- (a) MCCB 100 Amps 4 pole, 25 KA 415 Volts -02 Nos (b) MCCB 63 Amps 4 pole, 25 KA 415 Volts -02 Nos (c) MCB 63 Amps 4 pole, 25 KA 415 Volts -05 Nos (d) MCB 63 Amps SP,2 pole, 25 KA 415 Volts -02 Nos (e) Street light time switch with contractor single phase-01 Nos Note:- Ics = 100% Icu for MCCBs

Supply , installation , testing and commissioning in replacement of LT PANEL board outdoor type of suitable size Kiosk type factory assembled fabricated (CPRI APPROVED) and of suitable size angle iron, channel and MS sheet 3 to 3.15 mm thick (inner compartment is 2.0mm thick) double door type , front and rear openable with locking arrangement and indepent duly prewired with colour code three phases and netural aluminium bus bar 200 Amps for 415 volts, 50 Hz electric supply with and including suitable sizes of cable glands for incoming and outgoing cables , cubical type duly powder coated over a coat of primer , grouting of panel 60 cm above the ground level by angle iron frame bottom of panel 40x40x5 mm thick , welded on all four corners , embedded in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate upto 30 cm and,grouting the panel board on and including suitable size foundation with the following components complete all as specified and directed. INCOMING:- (a) MCCB 100 amps 4 pole 35KA 415 volts (incoming) – 01No (b) Digital type voltmeer 0-500 volts. (c) Digital type Ammeter with CT of suitable ratio for reading upto 200 amps load-01 Set (d) Indicating lamps R,Y& B -01 set OUTGOING:- (a) MCCB 63 Amps 4 pole, 25 KA 415 Volts -03 Nos (b) MCB 63 Amps 4 pole, 25 KA 415 Volts -05 Nos (c) MCB 63 Amps SP,2 pole, 25 KA 415 Volts -04 Nos (d) Street light time switch with contractor single phase-01 Nos Note:- Ics = 100% Icu for MCCBs

AGARWAL BUILDERS

Auto Traders

Ms Kailash Chandra Babulal

Garg Engineers