Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.6 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹47.0 L+₹5,214.55 (0.11%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | Rejected-Technical 0 HISAR HISAR HARYANA 125004 UDYAM HR 06 0052049 | HISAR | HARYANA | 125004 | - | Rejected-Technical Rejected as not enlisted in required catagory |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
21 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
SPL REPAIR OF EXTERNAL ELECTRIC DISTRIBUTION SYSTEM AND CERTAIN REVENUE WORK AT BAGRAKOTE STN UNDER GE SEVOKE ROAD
2022_MES_555727_1
GE/SEV/40 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹96,000
Yes
15 Dec 2022
13 Oct 2022
23 Nov 2022
13 Oct 2022
21 Nov 2022
7 Nov 2022
14 Oct 2022 - 24 Oct 2022
Amount
Excavating in trenches not exc 1.50m wide and n.exc 1.50m in depth in hard/dense soil and getting out complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for Brick work with fly ash bricks as in half brick thick wall built in CM (1:4), complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for broken stone boulders Hardcore of gauge exc. 63 mm, but n exc 100mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base complete all as specified and directed.
M&L for 50mm thick PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base complete all as specified and directed.
M&L for 40mm thick PCC (1:2:4) type B0(using 12.50mm graded crushed stone aggregate) as in DPC to horizontal or verticle surfaces including necessary formwork complete all as specified and directed.
M&L RCC 1:2:4 , type B1, 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span and lintel band, roof band and other similar items including form work complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incuding cranking, bending spirally for hooping for columns, hooking ends and binding with and incuding mild steel wire (annealed), not less than 0.9mm dia or securing with clips complete all as specified.
All as per item No.12 above but 5 mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed.
S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge..
S&F Steel ventilators with top hung shutter including hinges,steel peg stay, and including one coat of red oxide primer complete all as specified.
S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified & directed.
S&F mild steel screw bolts, 5 to 10mm dia machine made with hexagonal head at one end screwed the other or screwed both end, each screwed end to be fitted with washer and one hexagonal or square nut ,exceeding 05cm and not exceeding 10cm long complete all as specified.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F mild steel flat iron for security fencing post or wind ties including drilling holes for securing bolts and fixed with bolts and nuts etc and similar work conforming to Fe-290.Gde-E-165, complete all as specified and as directed.
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
M&L rendering 15mm thick in CM 1: 6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound all as specified and as directed.
M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and as directed.
M&L for glazed ceramic coloured tiles on vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and as directed.
M&L for mild steel round bars, 6 mm dia as in reinforcement to half brick wall (two Nos in every fourth course of half brick wall) complete all as specified and as directed.
S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing complete all as specified and directed.
S&F stainless steel butt hinges medium weight of size 100mm complete all as specified and directed.
S&F aluminium anodised handles of 100mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.
S&F vitreous china squatting pan "ORISSA" pattern of size 580x440mm white with and including 'P' or 'S' trap, with integral foot rests (excluding flushing cistern & flush pipe) including provision of lime concrete bedding and connecting up, complete all as specified and directed.
S & F flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including brackets and flush pipe of polyethylene PVC 32mm dia, complete all as specified and directed.
S&F PVC connection pipe 15 mm dia, 450 mm long with PTMT nut complete all as specified and as directed
S&F 32mm bore high density polyethylene pipes (LDPE) of pressure rating 6 Kgf / cm2, fixed to walls, ceiling or laid in floors etc, complete all as specified and directed.
S&F 15 mm bore GI pipe medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S& F 15 mm bore bib tap cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S& F 15 mm bore Angle stop valve cast copper alloy fancy type, chromium plated with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S& F 15 mm bore concealed stop valve cast copper alloy , , fancy type, chromium plated with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
Preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed
M&L for preparation new steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint complete all as specified and directed.
Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.
M&L for RCC 1:2:4 type BI (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and coloumn in floors, roofs, landings, balconies, conopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat surface) complete all as specified and directed.
M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured seperately.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F 20 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
M&L for 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.
Cutting existing 15 mm steel tubing for alternations or additions (each cut measured) complete all as specified and directed.
Cutting existing 20 mm steel tubing for alternations or additions (each cut measured) complete all as specified and directed.
Excavation over areas not exceeding 1.5m deep and getting out in hard/dense soil complete all as specified and as directed
All as per item No 54 above but exceeding 1.5m deep and not exc 3.0m in depth getting out in hard/dense soil complete all as specified and directed.
M&L PCC1:3:6, type C-2 (using 40 mm graded crushed stone agg) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.
M&L for providing precast cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks ( for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, boundarys ( for stone walling) corbwls, beackets, etc. ( of any section indicated) with plain fair faces, including chamfers weatherings throating etc and Set in CM1: 4 complete all as specified and as directed.
M&L mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified and directed.
M&L providing precast cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain fair faces, including chamfers weatherings throating etc and Set in CM 1: 4 complete all as specified and as directed
S&F 75mm bore sand cast soil waste and vent pipes in any length with or without ears with ceemnt joints fix on wall complete all as specified and as directed
S & F 75 mm bore cast iron soil cowl complete all as specified & directed
M&L 150mm internal dia of salt glazed stone ware drain pipes grade A laid in trenches and jointed complete all as specified and as directed.
S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved disign/pattern, with approved standard section and fixed to the existing window frame with C.P brasss/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-charge.
All as per item No 01 above but depth exc 1.5m n exc 3.00 m complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks in one & half thick honey comb walling built in cm 1:4 complete all as specified and directed.
M&L for loose filling with broken brick bats of guage 80 to 150 mm in soakge pit/soakge well complete all as specified and as diected.
S&F CI manhole cover 600 mm dia medium duty all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed
S & F 75 mm bore PVC (SWR) Vent cowl complete all as specified & directed
S & F 110 mm bore PVC (SWR) bends, diminshing pieces or tapers complete all as specified & directed
S & F 75mm bore PVC (SWR) branch piece single (Single `T') equal or unequal with access door complete all as specified & directed.
S & F 110 mm bore PVC (SWR) branch piece single (Single `T') equal or unequal with access door complete all as specified & directed.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed
M&L for cement concrete 1:4:8 (type D-2) as in bed for drain pipes 110 mm bore including packing under and hauncing against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for moorum/red bajri filling in floor or paving laid in layers n exc 15 cm thick spread levelled and blinded with earth and rammed including watering complete all as specified and as directed.
S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlines to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles complete all as specified and as directed.
M&L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in block for hold fast or similar work including form work complete all as specified and as directed.
S&F pressed steel frames (Size-165X60mm) for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified .
S&F factory made 2nd class hard wood rail and style 35mm thick plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F mild steel tower bolts stove enamelled black with bright bolt 200 mm long complete all as specified and as directed.
S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts nuts, four on bolts plate & two on staple plate complete all as specified and as directed.
S&F mild steel pressed handle oval type stove enamelled black 150 mm long complete all as specified and as directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded. complete all as specified and as directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete without glazing bars, dovetailed or welded complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
S&F factory made 2nd class hard wood rail and style 35 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) all as specified and directed.
S&F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
S&F (EWC) Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl all fittings complete and fixing to flush pipe and outlet pipe complete all as specified and as directed
S&F two way bib cock with wall flange chromium plated with crutch or butterfly handle screwed down screwed for iron pipe 15 mm bore and fixed complete all as specified and as directed.
S&F 15mm bore CP Toilet Hand Pressed Nozzle (Heath faucet) with 1.25 meter long tube with CP wall bracket complete all as specified and as directed.
S&F Vitreous China wash basins, white, flat back, size 550x400mm excluding taps, waste but including brackets complete all as specified and directed.
S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.
Supply only 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and as directed.
S&F Brass chromium plated shower rose 125mm size with or without swivel joint including fixing to steel pipe or union including taking down existing unserviceable shower rose complete all as specified and as directed
S&F 15mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed
M&L for preparation of new plaster surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting on walls complete all as specified and as directed
M&L for preparation of new or untreated surfaces of walls and applying two coats of weather proof exterior emulsion paint on exterior surfaces over a coat of alkali resistant primer complete all as specified and as directed
S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick decorative type pre painted non asbestos fibre cement fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
S&F PVC (SWR) floor trap dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.
Supply and fixing CP soap dish fixed to wall with screws complete all as specified.
S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
M&L for Sand filling under floors including watering and consolidation as in sand cushioning for interlocking paver blocks complete all as specified and directed.
S&F Modular Septic Tank of Capacity 2000 Ltrs (9-10 Users) (plastic septic tank) vertical design tank type includng all accessoried and lowering into position and fixed to inlet and outlet pipes complete all as per manufacturer instructions and directed by Engineer-in-Charge. Make:- Supreme/ Sintex Plastics/ Aqua tech.
S&F 150mm Internal Dia DWCPE pipes complete all as specified and as directed.
M&L PCC 1:2:4, type B0 (using 12.5mm graded crushed stone aggregate) as in copings, kerbs and the like incl weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work as reqd complete all as specified and as directed
M&L 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 M-35 grade, laid as directed to any shape. Complete all as specified and as directed
M&L for anodised aluminium frame for doors, windows ventilators with one or more rebates includinng joining cleat for fixing etc complete all as specified and as directed.
S&F anodised aluminium door shutters, aluminium section weighing 0.55Kg/m including necessary jointing cleats , glazing clips , rubber neoprene packing, hanles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed.
Supply only 5.5mm thick glass sheet ordinary quality in square exc 0.50 Sqm in each pane all as specified & directed.
M&L for solar control film 25 micron reflective type sticked to glass panes as per instruction of manufactures complete all as specified and directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified
M&L 20mm thick granite slabs of any type (table rubbed and polished) on cooking platforms set and jointed in net cement slurry and pointing in white cement (1:4) using marble dust with admixture of pigment to match shade of granite including necessary moulding at edges laid over and including 20mm thick cement mortor screed bed in cement mortor (1:2) complete all as specified and directed.
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for (Reinforced) complete all as specified and as directed.
M&L for virified ceramic coloured tiles (light shade) 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No -119 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete all as specified and as directed.
All as per Item Sl No - 119 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete all as specified and as directed.
All as per Item Sl No -119 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete all as specified and as directed.
S&F Switch piano flush type, single pole, one way, 5Amp complete all as specified and as directed.
S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.
S&F decorative box type LED fitting 20 watt 4 feet with Aluminium extruded batten luminaire for 230 volt AC all as directed .
S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium building security light with high power LED as light source lamp type 25 w with SPD , IP-66 protection with toughened glass including fixing pipe/saddle complete all as specified and as directed.
S&F decorative box type LED fitting 09/10 watt 2 feet with Aluminium extruded batten luminaire for 230 volt AC all as directed .
Supply and fixing DB with sheet metal enclouser 240 volts,04 way with rated bus bar single pole & neutral double door for MCB, including cutting chases for DB of required size and making good disturbed surface area complete all as specified and as directed.
S&F MCB, SP, 10 KA, 230 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed
S&F MCB, DP, 10 KA, 415 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.
M & L for Switch Socket Combination 2 in 1, 3 pin, 5 Amp flush type universal, 240 volts, complete all as specified and as directed.
M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete all as specified all as directed.
M & L for Switch Socket Combination 5 in 1, 3 pin, 5/15 Amp flush type universal, 240 volts, complete all as specified and as directed.
S&F in repair electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete all as specified and directed.
S&F in repair recessed mounted square pattern 2x2 feet LED luminaire 36/40 w, 230 volts with PDC Aluminium housing including driver and necessary fixing arrangements complete all all specified and as directed.
S&F in repair PVC ventilation fan AC , single phase, 230/240 V, of size 250mm sweep body including making holes on wall & making good the disturbed surfaces with all connecting arrangements complete all as specified and as directed.
S&F energy efficient 5 star BLDC (26 W) ceiling fan 230V, 1200 mm sweep without remote with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed.
Supply and fixing in repair DB with sheet metal enclouser 240 volts,08 way with rated bus bar single pole & neutral double door for MCB, including cutting chases for DB of required size and making good disturbed surface area complete all as specified and as directed.
Excavation in trenches not exc 1.5 mtr in depth, and n.exc 1.5 mtr in depth for laying of pipe/laying/cable/stay/poles and getting out in soft/loose soil complete all as specified and as directed.
Cutting & screwing existing water pipe line mains 100mm bore and connection with new pipe line 25mm bore laid including necessary fittings required at site complete all as specified and as directed.
Supply & laying in trenches GI pipe 20mm bore medium grade including fittings in trenches/wall complete all as specified.
Supply & laying in trenches GI pipe 25mm bore medium grade including fittings in trenches/wall complete all as specified.
Supply and laying in trenches/wall LT UG XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 6 sqmm 2 core including making necessary connections all as specified and directed.
Supply and laying in trenches/wall LT UG XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 sqmm 2 core including making necessary connections all as specified and directed.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fixing GI pipe 25mm bore light grade for cable protection complete all as specified and as directed.
Supplying and laying un-reinforced precast concrete cable cover , class LV 1, type 1 with peak, size 250mmx 150mmx 40mm complete all as specified .
Supply and fixing GI pipe 40mm bore light grade for cable protection complete all as specified and as directed.
S&F decorative full glow square PATTENS type recess mounted linear 40 watt panel LED fittings 2'x2' size with LED driver with high transmittenance luminaire for 230 volt AC complete all as specified and as directed.
Supply, install, testing and commissioning split type air conditioning (indoor & outdoor) complete with cooling and heating arrangement of capacity 2 Ton, 240 Volts, 5 star inverter based complete including copper piping, stand and all necessary fixing arrangement of AC complete all as specified and as directed .
Supply and fixing voltage stabilizer for automatic operation, single phase air cooled indoor type & design for input variation between 170V to 250 V with voltage stabilizer at 230 V with accuracy of + 2.5% and of capacity 5 KVA complete all as specified and as directed
M&L for PCC (1:2:4) type B-1 (20 mm graded crushed stone aggregate) as in coping or foundation for grouting, finished even and smooth without using extra cement complete all as specified and directed.
M & L for laying LT underground Cable, XLPE insulated, heavy duty armoured sheathed 1100 volts grade 120 Sq mm, 3.5 core, with aluminium conductor, ISI marked as per IS : 7098(Part-1) complete all as specified.
All as per item No 164 above but 10sqmm, 2 core all as specified.
All as per item No 164 above but 50sqmm, 3.5 core all as specified.
All as per item No 164 above but 70sqmm, 3.5 core all as specified.
Taking down overhead LT ACSR conductor from directed location making rolls and submit to MES store or as credit complete all as specified and directed by Engr-in-Charge.
Taking down MS clamps/channel/angles for pole incl any insulator from directed location and submit to MES store or as credit all as specified and directed by Engr-in-charge.
Taking down old u/s service wire of any size from directed location and submit to MES store or as credit all as specified and directed by Engr-in-charge.
S & F GI tubing of 50 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trench laid on floor formed by road/PCC cutting/boring as cable protection complete all as specifed and directed.
M&L for boring holes upto 50mm bore, under roads/PCC as directed for cable passing through pipes of required size and disposal of soil to a distance not exc. 50m. (Note: Connected items like Pipes is measured and paid seperately under relevant items).
Supply, install, testing & commissioning in repair of approved factory made outdoor cubical type LT feeder piller Box (CPRI tested) outdoor type suitable for 3 phase 4 wire 415V,50 Hz, IP-54 of appropriate size as approved by Engr-in-charge totally enclosed weather, dust vermin proof made of angle iron frame 50mm X50mmX6mm with cable entry and exit through bottom with double compression copper stainless steel cable glands and gaskets and 3.15mm thick CRCA (cold rolled cold annealed )MS sheet bend to shape, front & back side operated double door with proper hinge and Key locking and sliding bolt arrangement on both side with Al bus bar fixed on porcelain insulator and painting panel board complete with two coats of powder coated paint over a coat of red oxide primer with spray painting on internal and external surfaces and shall be complete incld panel internal wiring using with 1.5sqmm FRLSH Cu wire and coloured coded aluminium strips should be used for connecting all MCCBs from busbar either incoming or outgoing, also MCB SPN/TPN should be wired with 16 sqmm FR coloured Al wire . Bus bar shall be insulated with colour code/sleeves/tapes including necessary PCC (1:3:6)type C2 for foundation /Platform all as specified and directed. LT panel board shall be complete in all respects with and incld the following mentioned incoming/outgoing accessories: Note: All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer. All out going feeder shall be connected by cable through suitable size gland plate / glands. The various feeders shall be indicated by font size not less than 20 mm letters using Acrylic sheet. The minimums clearance of bus bar shall be 32mm phase –phase and 26mm for phase to earth. The bus bar shall have colour coding with insulating tape. The platform shall be such that it is of a height 45 cm above the nearest road level.
SRI SURAJIT SENGUPTA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .