Sifting of construction of 33 KV, 11 KV and LT Line on Bani Mohan Marg at Harauni Jatipur Railway Crossing against deposit scheme Under Jurisdiction Of EDD, CESS-I Cis Gomti, Lesa, Lucknow

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

Line Material

33 KV XLPE cable 3x300 sq.mm.

33 KV 3x300 sq.mm. ST Jointing Kit

33 KV 3x300 sq.mm. OD 3x300

ST Pole 11 Mtr. Long

33 KV Pin Insulator with Gi Pin

LT PVC Cable 1x630 sq.mm.

33 KV Stay Set

33 KV Earthing Rod

11 KV XLPE cable 3x185 sq.mm.

11 KV 3x185 sq.mm. OD 3x185

11 KV Pin Insulator with GI Pin

11 KV Disc Insulator with fitting

11 V type X-Arm

11 Stay Set

11 KV Earthing Rod

PCC Pole 8.5 Mtr. Long

ABC 3x120 sq.mm.

LT Distribution box 3 phase

LT Xlpe cable 3.5x120 sq.mm.

Jointing Kit OD for LT cable

Fabrication & erecton of exposer type double pole of end terminations, 33 KV Line on 11 Mtr. Long ST Pole with fixing of necessary clamps & other accessories, like 1 no top channel 100x50 mm 3.25 m its grouting in ratio 1:4:8, plinting 300 mm above ground level[ painting of pole with one coat of red oxide two coats of enamel paint ISI mark.

Fabrication, erection of exposer double pole for end terminations, 11 KV line on 11 Mtr Long ST Pole with fixing of necessary clamps & other accessories like 1 nos top channel 100x50 mm 2.24 m. 1 No. Guarding Angle. Its grouting in ratio 1:4:8 plinthing 300 mm above ground level, painting of pole with one coat of red oxide & tow coats of eneml paint (ISI Mark), earthing of support & one side cable expose.

Dragging of ST/PCC Pole to pit site, digging of pit erection and grouting (As per RESPO Norms) of 11 KV 11/8.5 Mtr Long ST/PCC Pole with, fixing of necessary item, such as V-type X-arm, F-bracket, 11 KV Pin insulator, Guarding angle (1.8 mm 65x65x6) with Nut & bolts its ramming as per RESSPO Specification. Only Pole and insulator will be Provided by the Department.

Dragging of PCC Pole from Dump Store to pit site, digging of pit erection and grouting (As per RESPO Norms) of LT support suitable for laying of ABC Line on 8.5 Mtr Long PCC Pole by providing of necessary eye hook/Lt Shackle insulator with Clamps and its accessories etc. as per RESPO Specification. Only Pole will be Provided by the Department.

Grouting & Nuzzling of 33 KV stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (Sand, Brick blast & cement). All material except stay wire shall be supplied by the contractor.

Ordinary earthing by 33 KV MS earth Rod 2500mm long as per RESPO Schedule. All material except earthing wire shall be supplied by the contractor.

Grouting & Nuzzling of 11 KV stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (Sand, Brick blast & cement). All material except stay wire shall be supplied by the contractor.

Ordinary earthing by 11 KV MS earth Rod 2500mm long as per RESPO Schedule. All material except earthing wire shall be supplied by the contractor.

Proper laying & commissioning of (3x50/3x95/3x120 sq.mm) XLPE Aerial Bunched Conductor. Only ABC Provided by deptt.

Laying of 33 KV 3x300 sq. mm XLPE cable double circuit digging of trench 1050 mm deep, 750 mm side including supply of required material, 1st class bricks, stone pad & fine sand. The inter spacing between two cable should be in between 0.25 m to 0.40m. The cables shall be laid in trench by first filling layer of sand and laying on sides with bricks, fixing bricks as partitions between two cables, after laying cable, covering cable by stone pads resting on bricks, covering it by earth, all work as per RESPO norms. (All material required for laying will be supplied by the contractor except 33 KV XLPE cable).

Cable Hosting of 33 KV 3x300 XLPE Cable at the following including jumpering etc complete with help of 6" GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

High pressure testing of 33 KV 3x300 XLPE cash along with arrangement of High Pressure equipment.

Laying of 11 KV 3x185 sq. mm XLPE cable double circuit digging of trench 900 mm deep, 650 mm side including supply of required material, 1st class bricks, stone pad & fine sand. The inter spacing between two cable should be in between 0.25 m to 0.40m. The cables shall be laid in trench by first filling layer of sand and laying on sides with bricks, fixing bricks as partitions between two cables, after laying cable, covering cable by stone pads resting on bricks, covering it by earth, all work as per RESPO norms. (All material required for laying will be supplied by the contractor except 11 KV XLPE cable).

Cable Hosting of 11 KV 3x185 XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

High pressure testing of 11 KV 3x185 XLPE cash along with arrangement of High Pressure equipment.

Supply and fixing of 630 sq.mm. Aluminum lug as per RESP Norms.

Fixing of Three Phase distribution box on the LT poles including all clamps and material required for mounting connections & sealing. Only Distribution Box will be provided by department.

Lyaing of LT cable For Road crossing in HDPE pipe 120 mm dia by drill method ( HDPE Pipe and other material required for laying will be supplied by the contractor except LT XLPE cable)

Dismantling of HT/LT line including rolling back its conductor, wire, pole, including stacking & transpiration of these materials form site to JE dump store/Central Store Daliganj, Lucknow.

Laying of LT PVC Cable 1x630 sq.mm. as per RESPO Norms. Only cable shall be supplied by deartment.

GST Extra as per Rules

M/S AARADHYA AND ADHYATM ASSOCIATES

Sidhi Enterprises