REPAIR/REPLACEMENT OF STREET LIGHTS FITTINGS AND SOLAR LIGHTS AND MISC WORK IN ZONE-I AND ZONE-II OF JAISALMER MIL STN UNDER GE (A) JAISALMER

Amount

Taking down old unsv LT Cable any size/any type all as specified and directed.

Laying only under ground XLPE cable, PVC sheathed, heavy duty aluminum conductor heavy duty armoured cable, 1100 volts grade,10 sqmm x 4 core ,fixed on pole ,wall and trenches etc. Note - a) Excavation and erath work will be measured and piad separately . (b) Cable will be issued under Sch 'B' for free for fixing only at MES store of AGE E/M Jaisalmer. (c) transportaing and shifting loading and unloading of cable will be done by contractor from MES store to site.

Laying only under ground XLPE cable, PVC sheathed, heavy duty aluminum conductor heavy duty armoured cable, 1100 volts grade,16 sqmm x 4 core ,fixed on pole ,wall and trenches etc. Note - a) Excavation and erath work will be measured and piad separately . (b) Cable will be issued under Sch 'B' for free for fixing only at MES store of AGE E/M Jaisalmer. (c) transportaing and shifting loading and unloading of cable will be done by contractor from MES store to site.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or Hard Rock for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out complete all as specified & directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or Soft/Disintegrated for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out complete all as specified & directed by Engr-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified & directed by Engr-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as directed by Engr-in-Charge.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as directed by Engr-in-Charge.(Note :- For the purpose of payment only punned thickness will be measured).

Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 50 to 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete all as specified & directed by Engr-in-Charge.

Taking down existing High Mast light fitting complete light with bracket ring along with their control gear with the help of winch at repairable height and taking up at its original height after repair and renewal of unserviceable material all as specified and directed by Engr-in-Charge.

Taking out Unserviceable Lamp Holder of size 250/400 watt.

S& F lamp holder inner thread type for High Mast Light 400 watts complete all as specified & directed by Engr-in-Charge.

S& F lamp holder inner thread type for High Mast Light 250 watts complete all as specified & directed by Engr-in-Charge.

Taking out Unserviceable super imposed igniter any size etc.

S&F Super Imposed 3 lead igniter suitable for High Mast Light 150/250/400 Watts complete all as specified & directed by Engr-in-Charge.

Taking out Unserviceable Lamp for High Mast Light(MH) of any size.

S&F lamp 400 Watt for High Mast Light (MH) complete all as specified & directed by Engr-in-Charge.

S&F lamp 250 Watt for High Mast Light (MH) complete all as specified & directed by Engr-in-Charge.

Taking out Unserviceable ballast of any watt etc.

S&F Ballast copper, 230/240 volts, 50 HZ AC suitable for HPSV/Metal Halide(MH) 400 watt complete all as specified & directed by Engr-in-Charge.

S&F Ballast copper, 230/240 volts, 50 HZ AC suitable for HPSV/Metal Halide(MH) 250 watt complete all as specified & directed by Engr-in-Charge.

Taking out Unserviceable Junction Box for street light of any size complte all as Specified and directed by Engr-in-Charge.

S&FJunction Box for street light made of PVC box including MCB 10Amps - 01 No and terminal 3 Nos for single phase and neutral on porcelain based insulator with locking arrangement fixed to pole with MS clamps of suitable (20mmx3mm) with nuts, bolts & washer including painting of MS clamp complete all as specified & directed by Engr-in-Charge.

Taking out Unserviceable Cable 2.5 Sqmm, Two Core all as specified and directed by Engineer-in-Charge.

S&F Cable 2.5 sqmm Two core, Copper conductor, 1100 volts grade complete all as specified and directed by Engr-in-charge.

Taking out Unserviceable MCB of any size etc.

S&F MCB single pole 10 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Eng-in-Charge.

Taking out Unserviceable electric Timer Switch any type all as specified and directed by Engr-in-Charge.

S&F in repair timer switch panel suitable for 40Amp 3 Pole with with digital timer and 63 Amp TP contactor timer switch complete with fixing arrangement complete with enclosure and required Nos of Switch gears/MCBs/Fuses complete all as specified and directed by Engineer-in-charge. (Make Indo Asian, L&T, Legrand)

Taking out Unserviceable LED street light of any type/any watt all as specified and directed.

Fixing only 1x 45 Watt street light fitting including all electrical connection complete all as specified and directed by Engr-in-Charge. Note : Street Light fittings Shall be issued by department under Sch 'B' free for fixing only.

Fixing only 1x 60 Watt street light fitting including all electrical connection complete all as specified and directed by Engr-in-Charge. Note : Street Light fittings Shall be issued by department under Sch 'B' free for fixing only.

Fixing only 1x 70 Watt street light fitting including all electrical connection complete all as specified and directed by Engr-in-Charge. Note : Street Light fittings Shall be issued by department under Sch 'B' free for fixing only.

Taking out Unserviceable of galvanised iron bracket of any size of any type all as specified & directed by Engr-in-Charge.

S&F Galvanised iron bracket of 'medium grade' pipe 40 mm bore, length 1.20m, bend to required shape with 2 Set clamps made of 40x6mm FI and suitable size of bolts, nuts & washers, etc duly painted with two coats of aluminium paint over a coat of red oxide primer complete for fixing street light fittings all as directed by Engr-in-Charge.

Taking out Unserviceable of MCCB any type/any make all as specified & directed by Engineer-in-charge.

S&F MCCB, 63 Amps, four pole,16 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engr-in- Charge.Note: ICS = ICU 100%.

Taking out Unserviceable GI Pipe light grade of dia 40 mm from excavated trenches/on pole/on wall etc .

S& Laying GI pipe light grade of dia 40 mm laying in road and along with poles for cable protection complete including taking down old pipe all as directed by Engineer-in-Charge.

Taking out Unserviceable GI Pipe light grade of dia 25 mm from excavated trenches/on pole/on wall etc .

S&laying GI pipe light grade of dia 25 mm laying in road and along with poles for cable protection complete including taking down old pipe all as directed Specified and directed by Engr-in-Charge.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate in foundation for PCC poles/struts including necessary form work complete all as specified & directed by Engr-in-Charge.

M & L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation of stay assembly including necessary form work all as specified and directed by Engr-in-Charge.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for pedestal/coping/plinth of poles, including necessary form work finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Scrubbing the old paint and prepare the smooth surface of steel tubular pole with the help of wire brush and emery paper. Painting of steel tubular pole from ground level to top with two coat of synthetic enamel paint over a coat of red oxide and making alternative strip in black and white colour of 30 cm each (Total - 05 Nos) with synthetic enamel paint including marking and writing complete all as specified and as directed by Engr-in-Charge.

M & Labour for preparation of old painted surface of LT Concrete electric pole of any size by removing all dirt, dust etc and painting complete surface upto pole top including connected accessories with dual coat of apex exteriors, synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height (Total 5 Nos), including painting the cross arms/bracing support on poles with a coat of aluminium paint, silver colour aluminium paint with coating of primer and writing of identification Nos with proper directions by Engr-in-Charge.

Taking out unserviceable/rusted LT Pole of any size/any type all as spcified and directed.

Supply, transportation fixing and errection of Steel Tubular Swaged poles complete with cast iron base plate, finial taper pulg, bolts, nuts and screws as specified type 410 SP-31 (9.0 meters long) and including making alternate white and black strips 30cm height (Total 05 Nos) with two coats of synthetic enamel paint over a coat primer complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable PV Module of any size/any type all as specified and directed.

S&F PV module 40 watt suitable for LED light of 9 watt complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable Battery and controller any type all as spcified and directed.

S&F Battery 12 V, 40 AH suitable for solar lighting system with controller complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable LED Light of any Capacity/any type all as spcified and directed.

S&F LED light 9 watt for solar light complete all as specified and directed by Engr-in-Charge.

M&L for Marking of Pole Number on PCC/Steel Tubular(HT/LT Pole) with suitable size 15cmx15cm using with sythentic enemal paint colour and using Black colour for Pole numbers etc complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable Lithium Ion based integrated type solar light any capacity/any type all as specified and directed .

S&F Lithium based energy efficient Integrated solar street light of 16 watt in single FRP body with duly polyurethane caoting encases with monocrystalline solar PV panel of 30/35Wp,Lithium battery 11.1/12.8 V,19.8 Ah with inbuilt BMS, IP 65,High brightness W-LED (160-180 lm/Watt) lamp with aluminium reflector for better lighting distribution, CRI 70, colour temperature 5700 K-6500 K,Microcontroller based charge controller cum driver, automatic dimming function with PIR motion sensor,Dusk to dawn operation weight not more than 10-12 KG with adjustable MS clamp suitable for existing pole/wall mounting etc complete all as specified and directed by Engr-in-Charge.Note :- Short circuit, overload, reverse polarity and battery protictions to be provided.OEM should provide vital parameters test report from NABL accredited lab and should be of made in india with CE &ROHS compliant.

OLIVE EXPORTS PVT LTD

Leelashah Enterprises