IMPROVEMENT TO BASKETBALL COURT LAWN TENNIS COURT AND SQUASH COURT IN AIRMEN BILLETS AT AF STATION GWALIOR

Amount

Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level and removing the debris to a distance not exc 2.5 Km from the starting point. Complete all as specified and directed.

M&L for 50 mm thick PCC 1:2:4 type B2 (using 20mm graded stone agg) as in floors and alternate bays finished even and smooth with using extra cement including necessary construction joints complete all as specified and directed.

Dismantling of old posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as directed.

All as per sl item No. 3 hereinbefore but embedded on natural ground. Complete all as directed.

Dismantling of fencing wire mesh,any type and remove from site of work,complete all as directed.

Supply only galvanised chain link fencing of size 50 x 50mm aperture and dia of wire of any size or type as approved by Engr-in -charge etc, complete all as specified. (Note :- (i) Fixing charges will be measured and paid separately under relevant item hereinafter. (ii) Weight of frame will be ascertained by the BOO before incorporation in work.)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified.

M&L for plain cement concrate1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in foundaion filling etc, complete all as specified.

M&L for PCC (1:4:8) Type D2 (40 mm graded aggre-gate) as in foundations, filling and mass-concrete complete all as specified and directed.

M &L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia of bolt etc, complete all as specified.

S&F framed work as in doors or gate of angle iron or other section with gussets plate, rails, braces etc drilled for fixing of steel seating other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth complete all as specified

M&L for applying one coat of aluminium paint including preparation of old steel/iron surfaces exceeding 10cm width or girth.complete all as specified

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.complete all as specified.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and segregation serviceable bricks, keep them staking for re use complete all as directed.

M&L for brick work with old size half brick subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

Surface dressing n exc 15 cm deep and getting out in soft/ loose soil and removing surplus soil to a distance n.exc. 50m and making good surface complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning under floors or in foundations complete all as specified and directed. Note : Punned thickness shall be measured and paid.

M&L for machine pressed precast concrete interlocking paver block 60mm thickness, M-35 Grade with grey cement & pigment any shape and size laid in floors and joints if tiles/blocks to be filled with fine sand and broomed confirming to IS 15658-2006 complete all as specified and directed.

Taking down carefully existing unserviceable copper/aluminum point wiring of any description & in any position with and including pvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’.

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor cable FR, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduit (Medium grade)/casing caping of suitable size not less then 20mm dia/width all as directed with using new sunken type pressed steel box/terminal boxes of suitable size, 2mm thick duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/junction boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor cable FR single core. PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed.

NOTE : (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing colour of surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs and provision of 8covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable GI screws and cup washers) (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of BOQ (Make of Cable/wire:- : Havells /Finolex/Polycab/Grandlay Make of PVC Conduit:-Finolex/Ess Ess Kay Engineering/Asian/Jindal/Plaza/Kalinga, Make of Laminated Sheet:-/Hylam/National)

M & L for switch flush type single pole one way 5 Amps, 240 volts, white/ ivory finish complete all as specified. (Make :- Anchor(Panta)/ Cona/ Leader)

S&F Street light fittings LED 150Watt 230V AC outdoor type with high pressure die cast aluminium housing and heat resistance complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP65/66 protection including necessary nuts, bolts washers and wire of suitable length for connection complete all as specified and directed. Make: Havells/ CG/ Surya

S&F LED flood light fittings 150Watt 230V AC outdoor type with lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP65/66 protection including necessary nuts, bolts washers and wire of suitable length for connection complete all as specified and directed. Make: Havells/ CG/ Surya

Dismantling & Taking out MCB DBs any size , any type and capacity and remove materials from site of works. Complete all as directed.

S&F for sheet metal enclosure Double door for DB’s 4 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires Complete all as specified. (Make;ABB,Schneider,Legrand, havells)

S&F for sheet metal enclosure Double door for DB’s 4 way 415 volts with 200 Amps rated bus bar for triple phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires Complete all as specified. (Make;ABB,Schneider,Legrand, havells)

Dismantling & Taking out MCB's/ Isolatotrs and metal clade box of any size complete all as specified and directed.

S&F for MCB single pole 6 to 32 Amps, "B" Curve, 10KA, 240 Volts complete all as specified (Make:Legrand/ABB/Schneider/Havells)

S&F for MCB Single pole and neutral 40 to 63 Amps 10 KA, 'B' series, 240 Volts complete all as specified. (Make:Legrand/ABB/Schneider/Havells )

S&F for MCB Single pole and neutral 40 to 100 Amps 10 KA, 'B' series, 415 Volts complete all as specified. (Make:Legrand/ABB/Schneider/Havells )

S&F in replacement 34W LED recess softline luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal. Fixture size 600x600x70mm complete with LED tube and all accessories specified. (Make : Havells cat part No PLUTONEO2X2PLR34WLED840S/Surya Cat No- SLEFP36R 22/ CG Cat Part No -LCTLSN36- CDL.)

Supply, jointing and testing XLPE insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to pole/ walls etc. complete all as specified and directed by the Engineer-in-charge for 6 Sqmm 2 Core sizes. (Make :- Polycab/Havells/Finolex )

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth strip 32x6 mm (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 40 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit , internal surface of concrete shall be given 10mm thick plaster in CM 1:4 and 40 mm thick precast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing new steel & iron cross arms, bracing, supports, clamps and back plate fabricated from structural steel sections including nuts & bolts, washers of any size and in any position including necessary painting to steel surfaces with applying two coats of synthetic enamel paint over a coat of Red Oxide Primer. Complete all as specified.

Supplying and fixing in position new PVC (Sinthetic) boxes of size 280mm X 170mm X 115mm depth, made out with Sinthetic. The box shall be provided with and including 10 cm long aluminium bus bar of size 20x3 mm size 2 Nos mounted on porcelain insulators including one No. MCB SP of ‘C’ series, 5/6 Amps of Make Legrand/L&T/ Siemens and connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminum lugs etc fixed on pole using 30x5 mm GI clamps, nuts, bolts & washers etc complete all as specified and directed by Engineer-in-Charge. (Note :- The contractors quoted rates for the above items are deemed to include for fixing the Synthetic box in position with suitable MS clamps and/or necessary PCC as per site requirement.)

NOTE:- Site clearance of materials- All demolished material obtained from dismantling/demolition items shall be deposited at place shown by Engr-in-charge properly spread and levelled and site to be cleaned to the entire satisfaction of Engr-in-charge otherwise panel recovery to a sum of Rs. 10000.00 be deducted from dues without any prior intimation.

M/s A.K. Trading Co.

lodhi builders

M/s raj construction

KISHAN CONSTRUCTION COMPANY

J.N.R. Engineers and Builders

M/S YOGANSH CONSTRUCTION CO.

M/s Shubham Construction Co.