Construction of shed/compound wall for Parking and charging e-Rikshaws at Muthi (Incl. cost of Electrification) (Balance Work)

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Reinforced cement concrete work in beams, suspended floors, roofs having landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

15mm Cement plaster of mix: 1 : 6( 1 cement : 6 fine sand)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and laying 60mm thick factory made cement concrete paver tiles of approved shape and colour of M-30 grade and laid in required pattern incl. bed of cement mortor, filling the joints with fine sand, cement dry mortor 1:3 mix etc (All complete as per the direction of Engineer-in-charge)

Disposal of Malba from the site of work 5km by MT

Providing and fixing of M.S wire square Mesh size 25 x 25 x 3mm on top of boundary wall fixed with angle iron

Providing and fixing of colour coated galvanized sheet 0.5mm thick incl. riveted bolt with bitumen washers complete job

Providing and fixing of colour coated plain sheet 0.50mm thik incl. rivetting, bolt (Complete Job) covering the opening of truss on front side

Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete welded

Supplying and fixing 5 amp to 30 amps rating, 240/415 volts,10 KA C curve miniature circuit breaker of single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make Havells/ Legrand/Anchor/C& L&T/Siemen/IA/HPL/Standard/ Wipro) (Single pole)

Supply & fixing 15/16 amp piano type switch on the existing switch box or cover including connection as required.(Make: Anchor/Havells/SSK/HPL)

Supply & fixing 6 pin 15/16 amp socket outlet on the existing switch box or cover including connection as required.(Make: Havells/HPL/Anchor/SSK).

Supplying and fixing following ways and poles, plain /horizontal sheet steel MCB Distribution Board on surface/in recess complete with tinned copper bus bar, neutral bus bar, earth bar, dinbar, interconnections including powder painted earthing etc. as required (But without MCB/SPN/Isolators) (2 way, for AC)

Supplying and fixing of following rating and poles 240/415 volts SPN in the existing MCB DB complete with connections, testing and commissioning etc. as required (Make : Anchor).63 Amp 240 volts DP

Supplying and drawing of following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required (Wire Make ISI Marked Havells ) 2x1.5 sq mm

Supplying and drawing of following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required (Wire Make ISI Marked Havells ) 2x2.5 sq mm

Supplying and drawing of following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required (Wire Make ISI Marked Havells ) 2x4 sq mm

Supplying and fixing of following sizes of medium class PVC conduit along with the accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required- ISI Marked Anchor . High Power/ Finlox/ National Gold /Shalimar/ Ravindra) 25 mm dia

Supply and installation of Aluminium type Maintenance free Chemical Earthing System. Electrode size length 3000x dia 50mm with CU pipe Thickness 2.10mm. CU inner and terminal strip size 32x6mm with GSI backfill compound 2 No’s Bag per earthing.

Supply/ Fixing of PVC type Gang box suitable for 15/16 Amp switch and socket.

Supply and fixing of 2 core Aluminium cable 16 sqmm suitable for main service line

Carriage of material by Mech.Transport a)Sand

b) Bajree 20mm

c)Bajree 40mm

RAHUL GUPTA

AKHIL GUPTA

ROMESH SINGH