Supply and Installation of Sports Science Centre Equipment Part in National Centre of Excellence NCOE Building of Dr. Sampoornanand Stadium Sigra, Varanasi Under Khelo India Scheme

Amount

NCOE COMBAT SPORTS BLOCK - SPORTS SCIENCE CENTRE EQUIPMENT (PART): ANTHROPOMETRY

Digital BMI Machine: Capacity: 660lbs/ 300 kg, gradation: 50g/ 0.1 lbs.; Measuring range: 30- 220cm, gradation: 1mm/ 0.05 inch.; Power Supply: Battery, power Adapter.; Frankfurt line for precise position of head.; Three-line multi-function touch display shows weight, height and automatically calculated BMI.

Sitting Height Table: Measuring Range: 320mm to 1090 mm.; Anti reverse carriage lock to compensate for upper leg variation and adjustable foot rest.

Multi-frequency Body Composition Analyser: Tetra-polar electrode method using 8 touch electrodes,; DSM-BIA, SMF-BIA Technology, 40 impedance measurements using 8 different frequencies,; Must be equipped with data storage facility.; Touch screen colour LCD screen display.; Voice guidance for test.; Measuring time: 40 secs.; Measuring weight maximum: 300kg.; Maximum height measurement: 220 cm.; Age range: 3-99 years.; Measuring Sites: Whole body composition and segmental composition (arms, legs and trunk).; Software: Latest operating system with compatible and upgradable software.; External interface via. RS232/ USB/ Bluetooth, Wi-fi.; Compatible printer/ in built thermal printer must be supplied.; Must show high correlation with DEXA.; Security Access code.; Frequency range of 1, 5, 50, 250, 500, 1000, 2000, 3000 KHz.; AFTER SALES SERVICE: The OEM should provide after sales service support team in India for efficient and timely support.; INTEGRATION: The device must have integration with Technogym, E-Gym, Milon Circle, Myzone.; ADDITIONAL ITEMS: The device must be supplied with Digital Blood Pressure Monitor from the same OEM for better compatibility.

Anthropometry Kit: includes - Large bone anthropometer (60cm).; Small bone anthropometer (18cm).; Flexible ergometer (3m).; Anthropometric Measuring tape (2m).; Portable stadiometer (3m).; Padded transport case.

Electronic Weighing Machine: Digital display.; Capacity: 1kg -200kg.; Accuracy: 50 g

Arm Span Measurement Apparatus: Material: Light weight wood.; Free sliding extensor for easy measure.; Range: 0 – 3000 mm (1 mm graduation).; Easy to assembly: 4 screws and 4 dowel pins includes a case.; Weight: 3.0 kg.; Dimensions: 324 x 8.55 x 12 cm.

Back and Leg Dynamometer: Measuring Range: 0 to 300 kg.; Minimum measurement unit: 1kg.; Dimension: 315 x 315 x 328 mm.; Weight: Approx 3.7 kg.

Sit and Reach Box for Flexibility: Dimensions: 21" x 12" x 13".; Weight: 8.55 lbs.

Digital Hand Grip Dynamometer: Adjustable 5-position handle.; Displayed in both pounds and kilograms.; Capacity: can measure grip strength up to 300 lbs (135 kg).; LCD screen, Bluetooth-enabled, Weight: 4 lbs.

Skinfold Calliper: Measuring range - inches: 0 in - 1.81 in.; Measuring range - millimetres: 0 mm - 46 mm.; Constant pressure between anvils: 10 grams/sq. mm.; Dial graduation: 0.08 in / 0.2 mm.; Weight in wallet: 1.1 lbs / 0.5 kg.

NCOE COMBAT SPORTS BLOCK - SPORTS SCIENCE CENTRE EQUIPMENT (PART): NUTRITION

Electronic Weighing Scale: Digital.; Capacity: 100 kg.; Accuracy: 10g.; Battery operated with power cord (optional)

pH Meter: "pH Range (pH) 0.00 to 14.00, Accuracy (pH) +- 0.002, Corrosion Resistant, Power Requirements 230 V +- 10, 50 Hz AC, Modes pH mV- C, Temperature Compensation Type Automatic.; Temperature Accuracy (Degree C) +- 0.3.; Temperature Compensation Range (Degree C) 0 to 100.; Resolution (pH) 0.001• Operating Humidity: RH in (%) 90.; Operating Temperature (Degree C) 50"

Measuring Utensils (Cups/Spoon/Glass/Jug): Glass/Food grade measuring jars of capacity 50 ml to 2000ml.; Food grade measuring cup set.; Food grade measuring spoons.

Food Scale- Recording/Quantifying Food: Maximum capacity of weight 10 kg with 1g graduation.; Clear display readability.; Battery operated.; Auto shut-off & Tare features.; Easy to clean and store.

Metabolic Analyser with Laptop: Equipment should be capable of measuring Resting Energy Expenditure, Respiratory Quotient and substrate analysis.; Flow meter: Should be digital Bi-directional Turbine Ventilation Range 0 - 50 L/m, Accuracy: + 2%.; O2 Sensor: with 0-22% range, Accuracy + 0.02%, Calibration automatic on room air.; Power Supply: Re-chargeable battery and mains operated.; Interface: It should have interface for downloading data to latest computers.; Software: Software should be supplied with the equipment. The management software should be designed with compatibility to not less than Windows 10 platform.; Compatible for face masks and mouthpiece.; Essential Accessories: The system should be supplied with all essential accessories required, including calibration syringes, in plug and play configuration.; List of consumables and their life should be clearly mentioned.; FDA approved.

CGM (Glucose Monitoring): Sensor: 1-4 No.; Reader: 1.; Sensor Specifications: Method: Amperometry electrochemical sensing.; Glucose reading range : 40 – 500mg/dL.; Size: 5-10mm height and 35-50 mm diameter.; Weight : 3-7g.; Power source: 1-2 silver oxide battery.; Wear period : 1-14 days.; Reader specifications: Size: 80 to 100mm x50 to 75mm x 15-20mm.; Weight: 50-75g.; Power source : 1-2 lithium battery.; Reader sensor memory : 1-2 sensor.

NCOE COMBAT SPORTS BLOCK - SPORTS SCIENCE CENTRE EQUIPMENT (PART): BIOMECHANICS

2D Video Camera: Sensor size -Minimum 1 inch.; Focus technology -Hybrid (Phase detection + contrast detection).; AF points coverage –At least 300 focus points.; Shutter speed -1/60 to 1/10000 sec.; Resolution &Frame speeds -At least 30 FPS at 4K and 120 FPS at Full HD.; Zoom optical-Minimum 8 X.; Should provide easy to move carry cases for cameras and tripods.; Should provide support and all the necessary accessories and cables for integrating all the cameras for usage in multi-camera analysis for performance analysis and notational analysis with commercial video analysis packages.; Should have minimum back up of 1 hours.; Should come with a backup battery.; Should provide battery charger.; Should come with memory card -SDXC,UHS II, Class 10,video speed class V90, Size 128 GB.

Video Analysis software (Biomechanical): 1. Marker based biomechanical system for two-dimensional(2D) analysis of Gait (Walking and Running), standing Posture and other sports activities also.; 2. Biomechanical motion analysis software (pre-installed in desktop) with inbuilt modules for posture analysis, walking gait analysis and running gait analysis.; 3. Able to allow measurement the joint angles & other data from regular walking and sports activities.; 4. Able to analyse the anterior, posterior, left & right lateral views of the subject and provide the following parameters: A- Walking gait analysis: Rear foot eversion/inversion, lateral pelvic drop, Knee flexion/extension, hip flexion/extension, ankle plantar flexion/ dorsiflexion, knee abduction/adduction, stance phase %-swing phase %,single support-double support time, cadence. All data to be measured for both left and right extremities B- Running gait analysis: Rear-foot eversion/inversion, lateral pelvic drop, Trunk side bending, crossover gait, knee flexion, leg inclination angle, knee toe-alignment, hip extension, ankle plantar flexion, net vertical oscillation of centre of mass, knee abduction/add action. All data to be measured for both left and right extremities.C- Posture Analysis: Major postural deviations like rear-foot eversion /inversion, forward head posture, shoulder protraction, genu recurvatum, lateral head tilt, shoulder level, lateral pelvic drop, lateral trunk sway, Q angle.; 5. Able to generate organized reports with following features:a- Data represented in tabular & photographic formb- Inbuilt reference ranges for every parameter measuredc- All data lying outside reference ranges to be highlighted in boldAutomatic documentation of all observations and abnormal biomechanics in form of notes (with choice of Hindi or English language if needed); 6. Have an option to export all data to excel sheets.; 7. Have an inbuilt comparison feature that generates Pre-Post comparison reports to monitor changes in patient's posture and gait.; 8. Have an inbuilt database feature for storing analysis data.; 9. The Motion Capture cameras of the unit should support video capture in outdoor conditions (running track) as well as indoor conditions (floor, walkway & treadmill) and Camera specification should be:a- Cameras- 02 (two) in numbers with capture rate up to 1000fpsb- Cameras-02 (two) in numbers with capture rate up to 90fps.; 10- Should have data transfer cables and connector cables for cameras along with Tripods for mounting of cameras.; 11- Should have Marker set (with marker placement guide) for Standing posture, walking gait analysis and Running Sait analysis with reusable marker and disposable markers'.; 12- Should be provided with one pair of Compression clothing and of Small' Medium' Large and XL sizes for lower body &upper body'.; 13- Quality clearance for camera cables: US FCC/ EU CEllSOl Bls(From any).; 14- Should be safe and non-invasive anci easy to use'.; 15- Supplied with carry case/ bag for storing and carrying all hardware equipment'.; 16- The supplier should provide in person training, virtual assistance and Technical support for System operation.; 17- Should also have an option to get complete summarized report of the analysis'.; 18- The Complete system should have 2 year warranty period.; 19- The Computer/ laptop should be provided of suitable configuration and colour printer.

Pressure Plate: 1. The number of sensors should be between 2900 to 3000.; 2. The active sensor area should be 380 x 380mm.; 3. Should have therapeutic module with at least 10 games for rehabilitation with option to increase/ decrease the difficulty level as per the patients need.; 4. Should have operation with wire.; 5. Should have operating temperature range between 5°C to 50° C.; 6. Frequency range should be between 1-50Hz.; 7. Pressure range should be between 1 to 150 psi.; 8. Should be equipped with software to display spatial and temporal parameters of Gait.; 9. System should be able to measure static & dynamic foot pressure distribution.; 10. Sensor resolution should be 2cm2.; 11. Sensor technology should be Piezoresistive.; 12. System should work without the Internet.; 13. System should be able to generate automated remarks for asymmetries of pressure distribution.; 14. System should be able to identify change in pressures with & without footwear/insoles.; 15. Dimensions: 700 x 508 x 11mm approx.; 16. Manufacturer must have ISO 13485 certification, CE/ BIS certification.; 17. Should be supplied with laptop and colour printer.; 18. The Complete system should have 2-year warranty period.

Force Plate (Dual): Hawkin Dynamics Gen 5 Force Plate, Performance Analysis (e.g., jumps, sprints, change of direction).; Biomechanical Assessment: Provides data on factors such as power output, asymmetries, and rate of force development, aiding in biomechanical assessments.; Training Load Monitoring.

Norbord: It should be Portable and should have 2 Load cell sensors per unit with easy to attach hooks pivoting 360 Degrees joint improving sensor accuracy.; It should have knee position indicator for replication of test position in each time.; Should have Sample rate per sensor: up to 400 HZ, Capacity per sensor: 100 kg/980-1000N Safe overload per sensor: 150 Kg / 1500 N, max Overload per sensor: 200 Kg/ 2000N, Resolution: 1N and Sensitivity: 22.0 +/- m V/V.; Should have Rechargeable battery & battery life should be 100 Active hours approx.; Should have Working temperature Range 5-40® C. ( All weather proof).; Latest upgradable software.; Should have both Wired & Wireless connectivity.; Connectivity through USB (Wired).; Bluetooth Low Energy (BLE) for iPad & iPhone i.e. (Wireless Connectivity).; Should provide 4 Years Warranty on Hardware.; Should be provided with latest upgradable software and free software updates.; Should have software available in Mobile & Laptop (Desktop) application with Cloud analytics platform Applications.; Should have ability to collect data both Local i.e. laptop and on iOS devices.; Should Local Software:- For Data collection & data Analysis Locally.; Should Cloud Software:- for Athlete Data Management and analysis.; Local (Desktop/Laptop)Software should be: Compatible with Windows 10 Desktop Application; iOS 13 or later Application (iPad & iPhone); Should have ability to collect data of over 10000 Athletes or more to choose with simple name search/Grouping them; Cloud Analytics Platform for analysis; Software (Application) must give real time feedback of testing; License must be valid for 4 years; Cloud Software:-Should automatically sync all data collected on local mobile and laptop application when connected to internet.; Should have a Dashboard to see overview of organisation’s Athletes data and different tiles (data indicators) to see Athletes within and outside threshold zones.; Report Section :- should have a report section to able to compare different groups/athletes on longitudinal data.; Should have ability to compare same athlete’s data over the period.; Athletes Profile:- Should have functionality to enter Anthropometry ( i.e. Upper Body & Lower Body measurements).; Athletes profile should be auto sync to Local Application and flexibility to move across different Groups or Teams within organisation and functionality to pick any athlete from large pool (1000 or more athlete.; Should be able to set up different access to different people i.e. to Physiotherapist, Sports Scientist and S&C trainer within the organisation to secure data access.; API Integration:- Should have Open source API Code for integration into Athlete Management System to integrate in (AMS System).; Should have software License valid for 4 years.; Wi-Fi Tablet 64 GB, Space Grey -- 1 Year Warranty ( as provided by OEM) -- Service by Customer Service of OEM only. HSN: 8471.

Timing Gates (8 Gates): 1. Should be able to record split /lap times, multilane testing, purge, pacing (aerobic test) Measure Linear speed, pre-planned agility, Force – velocity profile, Reactive agility test, asymmetry reactive cut testing, Reactive agility dribbling, Passing grid, etc.; 3. Software should be provided with Compatible Tablet or laptop.; 4. Software should have option for customization of testing modules.; 5. Software should provide automatic report in Printable format.; 6. Software should be able to export the test data in Excel/csv/txt format.; 8. Should include Timing module for independent operations; 10. Should have battery back-up of minimum 6 hours; 11. Should be provided with a carrying case or kit for ease of transport during outdoor testing.; 13. Should have lifetime license for software.; 14. Should have least count of 1/1000 s for accurate measurement of time.; 15. Should be able to give automatic starts for race for full race timing.; 16. Should be able to measure reaction time.; 17. Should have optional capability to connect to large displays for real-time visualization of timing results in competition settings.; 18. Should have the flexibility to design and save custom test protocols for different sports, drills, or research needs.; 19. Should be able to provide live data visualization on a tablet or laptop during testing sessions for immediate feedback and performance monitoring.; 20. Should be provided with Tablet/Laptop with minimum 11-inch screen.; 22. Software should have facility for real time feedback; 23. Timing gate must be appeared in peer reviewed journals.

Electromyography (8 Channel): 1. The system should be supplied with minimum 08 high speed Wireless EMG Channel with built in IMU sensor.; 2. Should Have Analog or Digital base station.; 3. Should have analog output option to facilitate integration with third party hardware and software.; 4. Sensor should have fixed inter sensor delay of 0.5 milliseconds or less.; 5. Sensors should have fixed spacing between electrodes preferably less than 15 mm to avoid motion artifacts and cross-talk.; 6. Sensor contacts should be made up of a metal for better contact and better-quality signal.; 7. Should be supplied with a charging/transmitting station that communicates with sensors to get information on their charging, recording and signal strength.; 8. Sensors, Sensor skin interface such as electrodes and/or double-sided adhesives, Cable, Power Adapter and accessories.; 9. Sensors facilitate EMG and IMU measurements.; 10. EMG data analysis Software for standalone usage with live recording of at least 16 channels and analysis for both online and offline modes.; 11. Trigger module package.; 12. Analog adapter with cable for Isokinetic dynamometer integration.; 13. Should have option for real time data streaming to computational software’s such as MATLAB.; 14. Mobile EMG suite/device for outdoor applications.; 15. Technical support for the lifetime (at least for a period of 05 years, if not lifetime).; 16. The system should be supplied with sensors docking unit or charging unit. System should allow charging of all 16 sensors at one time.; 17. The system should be supplied with minimum 2000 electrodes and minimum 2000 double sided adhesive stickers/tape.; 18. The system should be supplied with at least 2000 Hz of sampling rate or more per sensor.; 19. The system should have a baseline noise <1μV or better.; 20. The EMG System should have + 20,000 μV EMG input range or better.; 21. The system should have Software controlled digital filtering.; 22. The System should be suitable for movement studies with minimal artifact.; 23. Should have at least 8 hours of battery backup.; 24. Should have wireless working range of 30m or more to capture data during various sport specific movements.; 25. The EMG system should be integrated with 3D motion analysis, Force plate, Isokinetic dynamometer, Instrumented treadmill, IMU, eye tracking, video analysis etc.; 26. The necessary third-party hardware / software should be supplied by the seller for integration of EMG with other systems.; 27. Should be supplied with High Specifications Laptop and colour printer.; 28. US FDA, ISO & EU IEC certificates or equivalent.; 29. Installation at the Institute and training to the users by experts.

3D Motion Capture System: 3D MOTOION CAPTURE SYSTEM FOR SPORTS BIOMECHANICS LAB.; (A)HARDWARE – HYBRID INFRARED 3D CAMERAS: 8 pcs.; Motion capture system should consist of 8 Hybrid optical infrared (IR) motion capture cameras to perform marker-based tracking and marker less tracking with the same camera system.; The camera should have two modes, marker mode or video mode.; Cameras Sensor and Resolution: CMOS type with Marker stream: 2 MP @ 340 fps and Video stream: 2 MP @ 85 fps minimum.; 2 no’s of IR cameras should also be supplied having 2 MP @ 340 fps.; All Hybrid cameras should feature a real-time on-board marker data processing that calculates the centre point of markers and outputs 2D coordinates in real time in Marker mode.; The system should support both active and passive markers.; Camera should be completely noiseless to avoid any disturbance to the measurement subjects.; All Hybrid cameras should have a provision to adjust focus and aperture.; All hybrid cameras should have high grade corrosion resistant die-cast aluminium housing.; All hybrid camera strobes should contain high-powered surface mounted Invisible infrared light strobe.; All hybrid cameras should operate in the 100% invisible infrared wavelength range.; All hybrid cameras should operate with the electronic frame shutter.; All hybrid cameras should feature live video streaming mode to facilitate convenient and fast positioning of the cameras during initial setup as well as during further measurement volume adjustments.; Maximum camera latency: 6ms or less.; Individual hybrid cameras should weigh less than 1kg.; No of the cameras should be expandable to more cameras when needed with no limitation of adding hubs.; The hybrid camera should operate as standalone video cameras for as an integral part of the motion capture system for marker-based application.; The hybrid camera system should also be able to be utilize as a marker less system in video mode with the help of marker less software.; 3D data/video overlay: high-speed video cameras should allow calibration as a part of the motion capture system, in order to align the 3D data with the video image and thus produce a 3D data overlay on top of the streaming video image.; (B) HARDWARE – CAMERA SYSTEM CONNECTIVITY & CAMERA CABLING: Entire Camera System should be designed in a minimalistic, convenient manner, while ensuring seamless synchronization, supply of power and transfer of data.; Camera system communications with PC should be done through directly from one of the cameras to PC by 1-connector daisy-chained Gigabit Ethernet and power.; Camera cables should be PoE.; The camera system should be mobile and easy to relocate, with cables not exceeding 10 meters in length.; The system should include 1 full set of cables (1 set for permanent use in the main laboratory (Main Lab for indoor use)).; (C) HARDWARE – DATA PROCESSING AND SYNCHRONIZATION: The system should be able to integrate with external equipment, such as force plates, EMG, Instrumented Treadmills.; The whole set of 3D, force plate, EMG data and instrumented treadmill data shall be populated on a suitable high-performance computing system (Main Lab desktop PC), Desktop PC should be supplied with the system.; The system should include set of synchronization cables, external trigger switches and BNC cables.; (D) HARDWARE – CAMERA MOUNTING: Each camera should have a provision to connect with a quick release for Monforte and Arca Swiss tripod heads and also be compatible to mount on any other standard three-way tilt tripod head (8 Nos) for Hybrid camera and (2 Nos) for IR cameras.; 10 Nos of Supper clamps compatible with three-way tripod heads, screws and mountable to concrete walls (Main Lab).; (E) HARDWARE – ACCESSORIES: The system should include at least 500 markers of three variable sizes (100 no’s of 9.5 mm markers, 200 no’s of 16 mm markers, 200 no’s of 19 mm markers) along with 50 rolls of double adhesive tape and 2 full body set of rigid marker clusters with associated super-wraps and 200 numbers of 15 mm markers.; The system should include one Passive Calibration kit, including a carbon fibre wand. The L-frame should be equipped with water level.; (H) SOFTWARE - 3D DATA ACQUISITION SOFTWARE: Data acquisition software should come with an unlimited number of departmental licenses that can be installed on multiple workstations enabling multiple PC operators to carry out simultaneous data processing or with at least 10 licenses/dongles.; Data acquisition software should provide means for quick and intuitive hardware setup, calibration, even with some obstacles partially obstructing camera view.; Data acquisition software should feature individual camera settings control and calibration of entire system, including the integrated high-speed video cameras.; Data acquisition software should allow 2D, 3D, 6DOF data real-time streaming, capture, and storage.; Data acquisition software should have batch capture function allowing the user to capture a set of measurements in a trouble-free automated way.; Data acquisition software should provide user-friendly and flexible means for both manual and automatic labelling of markers. The automatic labelling should be applicable both in real-time and in post-processing modes.; Markers' automatic labelling template should be flexible and generic enough to identify any thinkable movement of human or animal body.; Markers' automatic labelling template should be able to merge data from multiple subjects to ensure scalability and enable its use for different subjects wearing identical marker setups.; Data acquisition software should allow one-click switching between 2D marker mode and a video mode for each infrared camera in the system.; Data acquisition software should allow simultaneous 3D or 6DOF data visualization both in real-time and post-processing mode.; Data acquisition software should allow real-time streaming, capture and export of the 3D/VIDEO overlay footage in AVI format.; Data acquisition software should be capable of re-processing, gap-filling and filtering of the collected data.; Data acquisition software should integrate and synchronize with external signals such as force plates and EMG data in order to produce frame by frame synchronized set of kinematic, kinetic and EMG signal data.; Data acquisition software should display synchronized data from all integrated devices in real time.; (I) SOFTWARE – 3D MARKERLESS DATA ACQUISITION & PROCESSING SOFTWARE: 3d marker less data acquisition & processing software should come with at least one licenses.; After processing from biomechanical Analysis Software, the marker less software should track and post-processes the data.; The Marker less Software Should have joint detection and labelling, multi-subject tracking and identification, as well as automatic model creation feature.; (I) SOFTWARE – BIOMECHANICAL ANALYSIS SOFTWARE: Biomechanical Analysis Software should be able to compute, report and graphical display of distance from origin, velocity, acceleration, and distance travelled between two points, angular velocity, angular acceleration, joint angles, stick figures, limb/body joint powers, moments, angles on sagittal and frontal planes, segment tilts, centre of pressure, ground reaction forces on lateral, vertical, and frontal planes.; Biomechanical Analysis Software should come with at least Two licenses that can be installed and activated simultaneously on Two separate computers and, should it be required, moved to other computers by simple deactivation/activation procedure.; Biomechanical Analysis Software should be able to build a biomechanical model of the subject, provide means for advanced data processing, filtering, calculations, automation scripting and flexible report building.; Biomechanical Analysis Software should have facility for generating customized biomechanical models and reporting templates.; (K) SOFTWARE – AUTOMATED REPORTING MODULES: The software package should also include pre-defined automated report generation packages with application specific protocols for Gait, Running and Functional Assessments.; The time required from data capture to the final report generation should not exceed 2 to 3 min.; The final report should be presented in a very interactive HTML format with in-built synchronized video and 3D data windows.; It should also have a cloud-based processing engine to work stand alone, 2 years of cloud subscription should be quoted.; System Necessities: 1. The system should be supplied with a Desktop Computer (For Fixed Lab) with following or similar or better features: - (a) Operating system: Windows 11 Pro 64-bit.; (b) CPU: Intel Core i9 13900K.; (c) RAM: 64GB.; (d) Hard Drive: SSD 2TB.; (e) Secondary HD: 16TB.; (f) Graphics Cards: GeForce RTX 3070 8GBor similar.; (g) Motherboards: ASUS ProArt Z790-CREATOR WIFIor similar.; (h) Communication: Network 1 x 10 Gbit 1 x 2,5 Gbit/s Wi-Fi 802.11 a/b/g/n/ac/ax.; 2. The equipment should be supplied, installed onsite with all accessories, sufficient consumables asked in the tender with one week's training from the Engineer & expert from the manufacturer. Regular follow up training every six months during the period of extended warranty on mutually convenient dates.; 3. It will be the sole responsibility of the vendor to prepare a pipe structure to fix the cameras in Main Lab area.; 4. Service backup from the vendor with response time of 24 hours.; 5. During warranty period the supplier should provide online technical support from the manufacturer and onsite local technical support from the manufacturer/ vendor.; 6. An extensive library of video tutorials with printable material should be available online.; 7. Letter of quality of performance to be furnished from reputed sports institutions in India (min 1 nos.) using this system.; 8. The tender document should clearly indicate how the above shall be ensured. Acceptance and compliance with the above specifications are required from the parent manufacturing company.; 9. The System should have international safety standards like European CE/ US FDA.; 10. Power Supply: Should meet Indian Power standards preferably without the use of external converters.

NCOE COMBAT SPORTS BLOCK - SPORTS SCIENCE CENTRE EQUIPMENT (PART): PHYSIOLOGY

Portable Metabolic Gas Analyser: Sampling Technique: 1. Breath by Breath Analysis; 2) Mixing Chamber (Internal or external) for Resting Metabolic Rate (Optional).; Testing Capability: Pulmonary Gas Exchange (VO2, VCO2), VO2 max, Sub-max VO2, Thresholds (AT, RCP), Heart Rate with HR Belt, Indirect calorimetry with Face Mask, Substrates Analysis (RQ, %FAT, %PRO, %CHO) * Aqua trainer ( Snorkel to test swimmers).; * C12 - 12 Lead ECG with Stress ECG S/w.; Sensor/Transducer: 1). CO2 Type: Non-Dispersive Infra-red / Thermal Conductivity. Accuracy: 0.02%.; 2). O2 Type Electro-chemical Cell Accuracy: 0.02%.; 3). Inbuilt Sensors for Temperature, Humidity and Pressure.; Weight: Less Than 1 Kg.; Transmitter Range: Up to 1000 m.; Battery: Rechargeable with autonomy of min 6 hours.; Flow meter: Bi-directional digital Turbine/ Triple V Volume Transducer; Flow Range: 0.08 to 20 L/s.; Ventilation Accuracy + 2%.; The system should be able to real time testing/data analysis on Laptop with latest configuration through Bluetooth and USB cable. The system should also be able to collect data in Holter mode to be downloaded later.; Ergometer Compatibility: The system should be able to control well known compatible treadmills and bikes ergometer as per standard or custom exercise protocols.; Essential Accessories: The system should be supplied with all essential accessories required like, Calibration gas cylinders – 01 no., Regulator - 01 nos., Calibration Syringe 3L, Latest Branded Compatible Laptop/Notebook PC with Original Windows 10 and Colour Deskjet Printer in ready to use configuration.; List of Standard Packaging should be provided.; Comprehensive Annual Maintenance Contracts for at least three years after warranty including consumables / spare parts should be clearly outlined.; Training on equipment at the site of installation.; European CE Certified and US FDA Approved.

Programmable Treadmill: Running machine with user Terminal (Display & Keyboard) stand-alone and remote control via RS232.; Running Surface: L: 170 cm ( Minimum), W: 65 cm (Minimum) * Safety Arch with Harness and Belt (M),; Maximum possible load : 200 kg(440 lbs).; Speed range : 0-40 km/h.; Elevation: ±25% (14° maximum elevation) motorized adjustment, reverse belt rotation.; Motor System 3.3 kW, Single phase AC Motor, Maintenance free and brushless.; Power transmission : Frequency inverter, Poly V-Belt, very quiet operation.; Safety system : Emergency-off safety stop switch(safety lanyard with actuator, pull cord and clip); potential equalization bolt; transformer for potential-isolation from the mains.; Ambient condition : temperature : +10 to +40 degrees C, humidity 30 to 70%.; Display (resolution) : LCD Display.; Heart rate monitoring : wireless transmitter; the treadmill should be able to interface with well-known compatible metabolic Gas analyser as per standard and custom exercise protocols.; Different Programs.; Comprehensive annual maintenance contracts (at least 3 years) along with list of consumables/spare parts should be clearly outlines.; Training on equipment at the site of installation.

Programmable Ergometer: Functional design and excellent stability.; Easy to use saddle, handlebar and pedals.; Speed independent and dependent power control.; Handlebars are easy to change to suit different tests.; Mechanical/ motor- assisted seat adjustment.; Easy to control and calibrate.; Can be controlled by two external devices (RS232 or USB).; BLE Smart and ANT+ HR systems.; Workload range 6-1000W.; Multiple user programmable exercise test protocol.

Anaerobic Ergometer (Upper body): Suitable for anaerobic upper body test (Wingate option),; Adjustable stand and chair for optimal positioning.; Easy to start with lighter flywheel.; The weight basket is released by a push button mounted on the cover.; Workload range 50 watt-2400 watt.; 5 kHz HR system in display.; Should be already Calibrated with correct weights.; Weight basket (1 kg) system must have- 4 pcs 0.1 kg, 1 pcs 0.5 kg, 3 pcs 1 kg.; Must include- Chest belt, PC, Anaerobic test Software, User License, UPS, Power adapter, Printer, HDMI cable.; Connectivity through RS232.; International safety standards European CE/US FDA approved.

Anaerobic Ergometer (Lower body): Suitable for anaerobic upper body test (Wingate option).; Adjustable stand and chair for optimal positioning.; Easy to start with lighter flywheel.; The weight basket is released by a push button mounted on the cover.; Workload range 50 watt-2400 watt.; 5 kHz HR system in display.; Should be already Calibrated with correct weights.; Weight basket (1 kg) system must have- 4 pcs 0.1 kg, 1 pcs 0.5 kg, 3 pcs 1 kg.; Must include- Chest belt, PC, Anaerobic test Software, User License, UPS, Power adapter, Printer, HDMI cable.; Connectivity through RS232.; International safety standards European CE/US FDA approved.; Should include a Compatible Chair.

Spirometer: Should include validated bidirectional digital turbine flow meter or pneumotachograph with max flow range of ≥ 16L/s.; Should be provided with suitable software for data management, real time assessment and accurate interpretation.; The system should have autonomy of min 5 hours.; Must include – [rechargeable batteries, battery charger, adapters, thermal papers (if required)], USB cable, user manual, single use mouthpieces (200pc), single use nosepieces (25pc), thermal printer rolls [10pc (if required)], compatible desktop/laptop, a colour multi-function printer.; The compatible desktop/ laptop must meet the specifications as under Windows 10 (32 bit and/or 64bit), min 2Ghz CPU with RAM more than 4GB, more than 500GB HDD and 4 USB ports, a Full HD display monitor, UPS, Keyboard, Mouse.; It should be able to measure the following parameters; Forced Vital Capacity (Pre-Post): FVC, FEV1, FEV6, FEV1/FEV6, FEV6/FVC, PEF, PIF, FEV1/FVC, FEF25-75, FEV1/VC%, %FEV1, MEF25%, MEF50%, MEF75%, FET100%, VEXT, PEFT.; Slow Vital Capacity: ERV, IRV, VE, IVC, VC, VT, Rf, IC.; Maximum Voluntary Ventilation: MVV, MVT, MRF, VE.; Interface options : USB/ RS232/Bluetooth.; Colour display.; Safety and quality control in compliance with international guidelines (i.e. ATS, ERS).; List of equipment with accessories supplied by OEM should be submitted.

Portable Lactate Analyser with 200 strips: The analyser should be a compact one with digital LCD display of parameters.; Portable, light weight, battery operated.; Can measure lactate from whole blood with minimal sample.; Processing speed: ≤ 15 secs.; Calibration: Automatic/ calibrated by simple coding.; At least 100 nos Test strips should be supplied with the unit.; Measurement condition: 5°- 40° C temperature, max 85% Humidity.; Measuring range: 0-25 mmol/l.; Memory capacity: > 300 samples.; Provision to inter phase the data with data acquisition system through USB cable and results should be viewed in the supplied data management software.

NCOE COMBAT SPORTS BLOCK - SPORTS SCIENCE CENTRE EQUIPMENT (PART): PSYCHOLOGY

Neuro Feedback/ Biofeedback: Capable of data acquisition for EMG, EEG, Heart Rate, Heart Rate Variability, ECG, abdomen and thorax Respiration, Galvanic Skin Resistance and Blood pressure monitoring.; System sensors have facility for self-impedance checkup and facility for automatic artefact rejection feature.; System sampling rate for the first two channels is more than 2000 samples/sec. for recording various parameters. Facilities available for multi-channel acquisition for the same parameter.; System be battery operated, and light weight to carry on the field.; System should be quoted with the sports specific Peak performance and specialise heart rate variability analysis system.; High grade connectors with low noise and active shielding for fewer artefacts.; System has facilities for online recording, telemetry data recording and on flash memory. Rechargeable Batteries, Battery life of at least - 30 Hrs logging, smart charging with no chances of overcharging. Also, provision for directly using the main power supply through AC mains. System gives noise free recording.; Strong and rugged sensor for use in various conditions, Sensors are reusable.; Analysis and operating software has various screens as per user requirements.; Operating system- windows 10 or windows 11 with a compatible laptop for each system with at least i5/i7 processing system.; Telemetric Transmission: minimum 100 meter.; Data Acquisition system with the programs preloaded to be supplied with the system.; There are preloaded programs like stress tests, respiration training, EDA relaxation training, confrontation training, temperature training, threshold value training.; Multiple feedback options like lines, pictures, videos, audio are present. System should comply with ISO/CE/FDA or with relevant electrical safety standards.; Lifetime license and periodic upgradation of software should be available.

Static and Dynamic Blanca System: 1. The number of sensors should be between 2900 to 30002.; 2) The active sensor area should be 380 x 380mm.; 3) Should have therapeutic module with at least 10 games for rehabilitation with option to increase/ decrease the difficulty level as per the patients need.; 4) Should have operation with wire.; 5) Should have operating temperature range between 5°C to 50° C.; 6) Frequency range should be between 1-50Hz.; 7) Pressure range should be between 1 to 150 psi.; 8) Should be equipped with software to display spatial and temporal parameters of Gait.; 9) System should be able to measure static & dynamic foot pressure distribution.; 10) Sensor resolution should be 2cm2.; 11) Sensor technology should be Piezoresistive.; 12) System should work without the Internet.; 13) System should be able to generate automated remarks for asymmetries of pressure distribution.; 14) System should be able to identify change in pressures with & without footwear/insoles.; 15) Dimensions: 700 x 508 x 11mm approx.; 16) Manufacturer must have ISO 13485 certification, CE/ BIS certification.; 17) Should be supplied with laptop and colour printer.; 18) The Complete system should have 2-year warranty period.

Eye Hand Coordination Trainer Lights: The system should be used to evaluate and train visual, cognitive, and motor function across all ages, stages, and conditions; should be utilised in training to address underlying visual, cognitive and motor deficits including visual-motor reaction time, peripheral visual awareness, executive functions, active range-of-motion and dynamic balance.; The system should be a highly effective sports training tool that helps athletes improve their reaction time, visual awareness and hand-eye coordination. System should have an interactive light board having a single seamless unit that uses minimum targets to train a broad range of skills, and is widely used by professional athletes.; Should have: Target board accommodating touch button lights arranged in circular or quarter-like formations.; Target board should be adjustable by height and be able to withstand strong impact; Targets should be adjustable with respect to their location, colour, frequency and duration; Laptop/ All In One Desktop. Standard 115v or 230v power.; Certification: Relevant ROHS/USFDA/CE/ISO Safety Standards should be adhered to – Manual: Operating manuals and instructions manuals should be provided with onsite training and continued technical support and training.

Vienna Test System (Sport): Software validity 7 years.; Assessment of Time Movement and Anticipation.; Assessment of Stress tolerance, attention and reaction speed.; Assessment of Peripheral Perception.; Assessment of Senso motor co-ordination.; Assessment of Reaction Time.; Assessment of Personality Measures the attention and reaction time in response to simple visual, auditory stimulus material.; Assessment of attention concentration through comparison of figures with regard to their congruence.; VTS Administrative software.; Hardware includes – Stereo headset, Universal response panel, Foot pedal, Analog foot pedal, Calibration module, PP Hardware, Suitcase for PP Hardware, Test System dongle, Laptop with latest configuration to support software.

NCOE COMBAT SPORTS BLOCK - SPORTS SCIENCE CENTRE EQUIPMENT (PART): PHYSIOTHERAPY

Shockwave Therapy: The Device should be suitable for Musculoskeletal.; Should be a focused shockwave based on Piezo mechanism.; Should have multi array type piezo electric handpiece.; Should have accuracy of the shock wave generation cycle (frequency) 0~8Hz ± 10%.; Should have software based Operating System.; The unit should have large colour touchscreen for ease of operation.; The Unit should have accuracy of the operating frequency 0~7000 Shock ± 10%.; The unit should have maximum energy density 0.702 mJ/㎟ (when setting at 23 levels) ± 15%.; Should have shock wave penetration depth 40㎜ ± 20%..; Should have maximum focus size 1.78㎜×1.78㎜×15.81㎜ ± 20%.; Should have Maximum pressure 44.01 ± 0.65 Mpa.; The unit should be supplied with Piezo Handpiece and elastomer Gel Padas of 8 different sizes, 5mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, and 44mm.; The life span of hand piece should be of up to 10 million shocks.; Should be supplied with trolley with castor wheels.; Dimension of the device should be approximated 500mm x 700mm x 1000mm.; Should have CE or USFDA certified.

Manual Therapy Couches: Should have a treatment table with 3 sections.; Should have 2-fold down armrest on head section.; Should have face hole on head section with removable face holder cover.; Total length of table should be approx. 201 cm (Head section approx. 46 Cm and Leg section approx. 101 cm).; .Height of the table should be adjustable with remote.; Lifting capacity should be up to 200 kg.; Head section should be adjustable.; .Leg section should be adjustable.; Should be electrically operated (main Power 220v-240 V).; Should have two sides of brackets for fixation of stabilization belts/elastic bands.; should have high performance multidirectional castor wheels.

TheraBand Station: Connection capacity: 1-84” wall slide connect track.; 1-18” slide connect overhang track.; 1-24” adjustable slide connect cross bar track.; Exercise station floor Base unit.; Accessories: 4 resistance band exercises handle.; 2 resistance band assist straps.; 2 resistance band extremity straps.; 1 resistance band head straps.; 1 waist belt.; All accessories should be attached.; Balance and Core Training; 4 stability trainers.; Educational Materials: Wall station posters.; CD of 170 exercises.

Ultrasound Machine: Should Have frequency: 1 & 3 MHz.; Should have emission: Continuous and pulsed ultrasound (20% to 80%),; Should have multi frequency head area 5 cm square 1-3 MHz working in single or differently combined.; Should have static as well dynamic ultrasound option.; Should be supplied with one Hands free ultrasound head and one dynamic ultrasound head.; Should have modulation from 1 to 100 Hz,; Should have automatic calculation of depth and energy density.; Should have automatic power switch off,; Should have Timer up to 15 min.; Should have display: Coloured or Touch screen display.; Should have minimum 10 Memories to store the patient data file.; Should have approximate peak intensity of 0-2W/cm2 duty cycle 100% and 0-3W/cm2 duty cycle< 100%.; Should have real-time device with indication of correct contact between coupling of head and patient's skin.; IEC Protection Class: 1 BF.; International Safety Standards: European CE/USDA.; Should have Power supply: 220-240VAC, 50 Hz.

Laser Therapy: Should be class IV high level laser therapy system.; Should have a Real-Time Operating System technology.; Should have maximum laser power output of 15 Watts.; Should have wavelengths of 810 nm & 980 nm.; Should have an aiming beam of 650nm, Should have 2 operating modes: Continuous Wave or Pulsed.; Applicator hand piece Should have embedded finger switch and light.; Should have a technology to customize patient treatment based on conditions, body area, body type, skin type, chronicity and absorption characteristics.; Applicator Should have a fused silica composition massage ball at the point of contact of applicator and skin,; Pulse Frequency: 2,10,20,100,200,500,1000,2500,5000 & 10000 Hz.; Pulse Duration: 50% duty cycle at any given pulse frequency setting.; Should have a 10” HD display touch screen with password protection to reach the home screen.; Should be supplied with 2 nos. of laser protection glasses.; Power: 100-240V, 50-60 Hz.; The unit Should be supplied with 5 numbers of different types and size of treatment heads (Large Cone, Large Massage Ball, Flat Window, Small Massage Ball, and Small Cone.; The unit Should have inbuilt battery.; Electrical Safety Class: Class I, Type B.; Weight Should not exceed 4 kilograms (main unit; without applicators & accessories.

Hot Magner (4 channel): Combination therapy unit with Heat, magnetic force and micro vibrations.; The system should be modern with touch button operation and LED display.; The system should consist of four channel unit with 4 hot packs in two sizes for simultaneous use.; It should have flexible heating pads giving dry heat so that it can be used over clothes in normal conditions.; The heating pads should have four steps temperature control from 35º to 60ºC. in 4 steps .Maximum temperature should not exceed 62ºC for patient protection.; It should provide vibrations through flexible heating.; The system should have three different types of micro vibrations as below : Ripple wave : - 70 vibrations per second; Random wave : - 120 vibrations per second; Big wave : - 60 vibrations per second.; It should have inbuilt Magnetic force for improving the blood flow.; Micro vibration should be from alternating magnetic field only for a pleasant stimulus to a diseased part.; It should have digital timer of 30 minutes duration. It should be supplied with an imported trolley and should work on 110-240 V &50/60 Hz power supply.; It should UL and ISO 13485 approved for patient safety.; Safety class strictly according to IEC 6060-1, Class 1, Type –B Main unit should be light weighing not more than 20 Kg.; Performance Certificate from reputed government hospitals should be enclosed in the tender.; The equipment should be supplied with 02 Standard hot pack with cover, 02 Large hot pack with cover, 01 Magnet detector, 01 Power cord, 01 user manual.

High Intensity Electromagnetic Therapy: Should provide High Energy Inductive Therapy with Magnetic Field Strength up to 3 Tesla adjustable in step of 1% for deep penetration up to 15cm into skin, muscle and bone as well.; Frequency should be adjustable up to 100 Hz.; Should have 2 Channels outputShould have 8” or larger colour touch screen display for ease of operation.; Should have Inductive, Non-invasive, Non Skin contact applicators of different sizes.; Should have large applicator for Static hands free treatment easily positioned to all body areas with adjustable armShould have medium size applicator for dynamic treatment.; Should have at least 20 preset protocols covering all major indications.; Should have free memory space for at least 20 entries to store favourites.; Should have free memory space for at least 20 entries to store own choice of treatment parameters.; Treatment time should be adjustable up to 60 minutesShould have oil circulation cooling transducer system to ensure regular usage and avoiding over temperature.; Should meet international highest quality and safety standards in accordance with the EC Directive on Medical Devices 93/42/EWG.; Should have warranty period of minimum 1 year, irrespective of number of impulses.; Should meet international safety and quality standards.; Should have CE/ FDA approval.

Cryo Compression Unit: System should be portable and should operate through main power supply of 100-240 V/50Hz as well as Separate battery pack with minimum 3 hours of backup.; System should be easily capable to adjust ice and Compression with reference to RICE regimen.; System should have manual temperature control setting available for treatment in steps of 1 degree Celsius.; System should have Temperature control from 1”C to 10”C.; System should have automatic programs of 30 mins ON 30 mins OFF and should have a minimum of 10 different preprogrammed protocols + minimum 10 free protocols, so that user can do personalize program as per their choice.; System should have built in purge mode to drain out water out of the wraps and main unit.; Wraps should be using latest technology offering a comprehensive range of anatomically designed wraps.; Wraps should consist of heat exchanger along with machine/hand washable sleeves.; System should be useful for a variety of sports musculoskeletal injuries and for postoperative rehabilitation.; System should have built in colour or LCD display to monitor the water temperature going into the wraps.; System should be supplied with following wraps: Ankle Wrap, Large (fits men’s shoe sizes UK 8-9, US 9-10 and under for both the ankle) – 1 no. each.; Straight Knee Wrap (one size should fit all for both the knee- Universal size) - 1 no. each.; Half Boot Wrap, Large (Universal size)- 1 no. each.; Hip/Groin Wrap, Right and Left - 1 no. each.; LS Wrap and CT Spine Wrap - 1 no. each.; Hand/Wrist Wrap, Flexed Elbow Wrap (one size should fit all)- 1 no. each.; Shoulder Wrap, Medium, Right and left (fits chest sizes 84cm-114cm/33-45 inches) - 1 no. each.; Shoulder Wrap, Large, Right, left (should fit chest sizes ranging 102cm-140cm/40-55 inches)- 1 no. each.; Cooling Vest/Cryo Vest - 1 no. each.; Full Leg Boot Wrap, Large, Medium -1 no. each.; Sould be provided with the following additional accessories: Dual Connector Hose (For Sports use) - 1 no.; Original Carry Bag by OEM for Control Unit - 1 no.; Original OEM Wrap Bag (holds a minimum of 10 Wraps) - 1 no.; Should have USFDA/ECE and appropriate Indian Medical Safety Sandards/Certifications.

Cervical Training with Biofeedback Exercise Device: The System should be suitable for Medical Exercise, training and functional analysis of the spinal (Cervical) muscles.; The isolated strengthening of the cervical muscles should be assured on this device through a patented fixation system of the upper body with a chest pad and a belt.; The head should be balanced by a counterweight. The isometric force measurement over the entire ROM of the cervical spine (126°) should provide baseline data for the basis of individual treatment planning.; It should also have facility to recondition the cervical spine by isolating specific areas during training. With the Cervical Extension machine, should also have the possibility to perform isolated strengthening and measure the force curve for the cervical spine.; Should have the facility to adjust the seat to eliminate head sliding on pad.; When possible, the resistance weight is increased progressively at each therapy session.; Should be able to perform Isometric testing, every 3˚ through the normal 126 ˚ range of motion.; The cervical extension restraint system for cervical region should come with shoulder harness, resistance pad, seat belt, torso restraint, seat belt, adjustable seat.; The system software should be able to perform testing and training based on different strength and performance.; Should be able to perform Clinical Fatigue Response Test.; Should also provide safety features includes dual weight stacks with a stroke length of only 1.5 in. during a full range of dynamic contraction.; Dimensions (LxWxH): 63”x48”x66”.; Weight: 1570 lbs.; Should have European CE/ FDA.

Cryotherapy Chamber: Should have 100% Electric Cryotherapy Chamber without use of Nitrogen gas..Should have ability to offer Whole Body Cryotherapy treatment that exposes the entire body to extreme temperatures as low as from -90°C to -130°C in order to promote health & wellness, performance and recovery.Should have screen that displays the amount of treatment time. The device should have equipped with a high-quality sound system to play users favourite tracks via Bluetooth and enable audio communication between operator and user. . Should have minimal recovery time between sessions allows operators to optimally run cryo sessions every 15 minutes.Should have equipped with Temperature sensor, Door alarm, thermal imaging, humidity sensors for safety purpose..Should have European or CE or USFDA safety certificates.

NCOE COMBAT SPORTS BLOCK - SPORTS SCIENCE CENTRE EQUIPMENT (PART): STRENGTH & CONDITIONING

Olympic Power Racks: STRENGTH MADE STRONGER From Olympic benches which can be customized with or without weight storage to our one-of-a-kind abdominal and back extension benches, we’ve raised the bar for both aesthetics and function. Our benches and racks flow seamlessly with our other products so you will notice a family look and feel as you position your free weights alongside our Inspiration Strength®, Impact® Strength, Human Sport®, Leverage®, Multi-Stations and Plate Loaded lines. Our benches and racks don’t just look strong, they exceed industry requirements in all respects.; W: 63 IN (160 CM).; L: 69 IN (174 CM).; H: 94 IN (239 CM).; STACK WEIGHT: N/A.; OVERALL WEIGHT: 538 LBS (244KG).; SHIPPING WEIGHT: 708 LBS (321 KG).

Weightlifting Designated Platform: Material: Constructed from 11-gauge heavy-duty oval steel pipe.; Design: Unique, sturdy design capable of withstanding normal wear and tear.; Coating: Black powder-coated finish to enhance durability and resistance to corrosion.; Construction: Bolt-together assembly for easy installation.; Gusseted corners for added stability and strength.; Load Capacity: Must support a minimum weight capacity of without deformation.; Wooden base: Each layer’s grain orientation must be perpendicular to the adjacent layers to enhance strength and stability.; Chemically treated with preservatives to protect against termites and other pests.; Virgin Rubber Mat Material: Made from 100% natural virgin rubber.; Performance: Superior shock and vibration absorption.; Minimal bounce upon impact, reducing the risk of accidents during lifting.; Sound-dampening properties to minimize noise from dropped weights’.

Landmine Attachment: For use with Landmine and/or Post Landmine, Monster Landmine, Double Landmines, Handle Length: 8.75" (Handle); Handle Diameter: 1.9" fat grip, 1.3" standard; Handle Spacing: 10" on centre.; Handle Finish: Signature Black Powder Coat 0.25" thick Laser-Cut Steel Plating with branding.; Total Weight: 12LB, Compatible with any standard Oly barbell.

Leg Press: Working out with plates is one of the most effective ways to train, which is why plate loaded machines are a staple for facilities. Whether you are looking to build a full-strength circuit or round out you’re offering with specific pieces, Nautilus Plate Loaded offers the best machines for plate workouts. Each machine is built strong enough to stand up to full commercial use and is designed to make plate workouts as effective, rewarding and safe as possible.W: 72 IN (182 CM)L: 90 IN (229 CM)H: 58 IN (147 CM)STACK WEIGHT: N/AOVERALL WEIGHT: 569 LBS (258 KG)SHIPPING WEIGHT: 651 LBS (295 KG).

GHD’s: From Olympic benches which can be customized with or without weight storage to our one-of-a-kind abdominal and back extension benches, we’ve raised the bar for both aesthetics and function. Our benches and racks flow seamlessly with our other products so you will notice a family look and feel as you position your free weights alongside our Inspiration Strength®, Impact® Strength, Human Sport®, Leverage®, Multi-Stations and Plate Loaded lines. Our benches and racks don’t just look strong, they exceed industry requirements in all respects.; W: 43 IN (110 CM); L: 72 IN (182 CM); H: 48 IN (122 CM).; STACK WEIGHT: NA; OVERALL WEIGHT: 188 LB (85 KG); SHIPPING WEIGHT: 223 LB (101 KG).

Squat Machines: Working out with plates is one of the most effective ways to train, which is why plate loaded machines are a staple for facilities. Whether you are looking to build a full-strength circuit or round out you’re offering with specific pieces, Nautilus Plate Loaded offers the best machines for plate workouts. Each machine is built strong enough to stand up to full commercial use and is designed to make plate workouts as effective, rewarding and safe as possible.W: 72 IN (182 CM); L: 93 IN (236 CM); H: 47 IN (119 CM); STACK WEIGHT: N/A; OVERALL WEIGHT: 446 LBS (202 KG); SHIPPING WEIGHT: 604 LBS (274 KG).

Adjustable Bench: STRENGTH MADE STRONGER.; From Olympic benches which can be customized with or without weight storage to our one-of-a-kind abdominal and back extension benches, we’ve raised the bar for both aesthetics and function. Our benches and racks flow seamlessly with our other products so you will notice a family look and feel as you position your free weights alongside our Inspiration Strength®, Impact® Strength, Human Sport®, Leverage®, Multi-Stations and Plate Loaded lines. Our benches and racks don’t just look strong, they exceed industry requirements in all respects.; W: 27 IN (69 CM); L: 55 IN (140 CM); H: 16.5 IN (42 CM); STACK WEIGHT: NA; OVERALL WEIGHT: 117 LB (53 KG); SHIPPING WEIGHT: 128 LB (58 KG).

Olympic Flat Bench: STRENGTH MADE STRONGER. From Olympic benches which can be customized with or without weight storage to our one-of-a-kind abdominal and back extension benches, we’ve raised the bar for both aesthetics and function. Our benches and racks flow seamlessly with our other products so you will notice a family look and feel as you position your free weights alongside our Inspiration Strength®, Impact® Strength, Human Sport®, Leverage®, Multi-Stations and Plate Loaded lines. Our benches and racks don’t just look strong, they exceed industry requirements in all respects.; W: 65 IN (165 CM); L: 73 IN (185 CM); H: 49 IN (124 CM); STACK WEIGHT: NA; OVERALL WEIGHT: 115 LB (52 KG); SHIPPING WEIGHT: 139 LB (63 KG).

Weightlifting Sets: A complete set of Steel Plate Set - Pair of 2.5, 5, 10, 25, & (4) 45LB plates. Nothing replicates the sound of old school steel plates being lifted in a gym. Olympic Plates are simple, classic, and tough enough for daily abuse.; weightlifting Bar will be Weight: 15KG (33 pounds); Diameter: 25MM (0.98 inches); Tensile Strength: 190,000 PSI; Black Zinc Coated Shaft; Bright Zinc Coated Sleeves; Dual Knurl Marks: Both Powerlift and Olympic KnurlingNo Centre KnurlF-Scale Rating: F6-R.

Technique/Warm up/ Mobility Bar: Specialty Technique Barbell; Stainless Steel construction; NOT Load Bearing; Diameter: 28MM; Bar Weight: 15LB; Length: 54"; Olympic Knurl Marks; No Centre Knurl.

Sled: As seen at the 2022 CrossFit Games - Mounts to Echo Dog Sled using ½” x 1-½” Hex Bolt; (1) 3/16” Welded Steel Pan + 11-gauge Spacer; Pan Dimensions: 42 LBS - 30”x22” (outer), 21.5” x 13.5” (inner), 4” height; (2) Single-formed Bent Handles - 31.75” and 12” height; Other Handle Dimensions: 28LB combined weight, 1.9” diameter, 20” spacing on centre Alpaca Add-Ons Finish: Texture Black Foot Print: 36.5" x 25".; Total Weight with Alpaca Add-Ons: 136 LBS.; Protective Plastic Skis; Dragging Strap.

Ski Ergs: The Throwdown HIIT SKI replicates the exhilarating motions of cross-country skiing within the confines of the gym. Its sleek design and user-friendly interface make it an enticing addition to any workout space. As one of the few fan-based resistance machines that train upper-body endurance, the HIIT SKI works harder against you the harder you work, taxing your arms, legs, core and cardio! Whether you’re a seasoned athlete or just starting your fitness journey, the HIIT SKI’s ability to provide a dynamic full-body workout is undeniably impressive.; H: 85 in (216 cm); W: 20 in (52 cm); D: 16 in (40 cm); FINISH: Electrostatic Powder Coating for long lasting durability; MAX USER WEIGHT: 350 lbs (159 kg); MACHINE WEIGHT: 52 lbs (23 kg).

Rower: FRAME: Heavy-Duty Aluminium; SLIDE RAIL – Aluminium; FOOT STRAPS WEIGHT - 72.6 LBS; USER WEIGHT LIMIT - 500 LBS; MAX USER HEIGHT - 38" Inseam; SEAT HEIGHT - 16" from Floor; FOOTPRINT - 99" x 26" (38" x 26" when folded); DISPLAY - 4.7” LCD Console Display with customizable modes - Bluetooth / ANT+ compatible.; INTEGRATED SMARTPHONE HOLDER – Yes; POWER - Self Generating Console Power with (2) D Cell Battery backups (Included); CHAIN - Nickel Plated; FINISH - Texture Black Power Coat.

Curved Treadmill: From the makers of the toughest workouts in the gym, comes the Stairmaster HIITMill & HIITMill X. Unlike a standard treadmill, these machines are self-powered speed and strength training tools designed to build explosive power when used in a High-Intensity Interval Training program. These High-Intensity machines deliver an effective resistance training platform that captures the benefits of speed and agility training, lateral training and sled training. Users can now push, drive and sprint with the resistance of a sled, safely and with a smaller footprint. These easy-to-use tools allow users to drive up metabolic intensity and make for a more space efficient solution to alternative training methods. Gear up for one tough and rewarding HIIT workout that members will love to hate.W: 38 IN (95 CM)L: 78 IN (197 CM)H: 66 IN (167 CM)MAX USER WEIGHT: 350 LBS (159 KG)MACHINE WEIGHT: 382 LBS (173 KG)SHIPPING WEIGHT: 494 LBS (224 KG).

Dumbbells, Medicine Balls, Kettlebells: Heavy-duty Rubber Encased Heads: minimize noise, floor damage, and wear and tear on the dumbbells themselves.; Easy-grip, ergonomic Chrome-Plated Handle; Proprietary head to handle construction ensures the head does not come loose Medicine ball : Diameter: 14”; Coated Vinyl Shell – moisture and scuff resistant; Soft Shell safe to use at high speeds, but strong enough to maintain stable shape.; Double-stitched nylon threading on the seams of balls weighing 14LB or more; Weight Options: 4LB, 6LB, 8LB, 10LB, 12LB, 14LB, 16LB, 18LB, 20LB, 25LB, 30LB; Colour: Black; Kettlebells : Ductile Iron, Single Cast Construction; 18 Available Weight Increments, from 9LB to 203LB; Bell Dimensions: Vary By Weight.; Finish: Black Powder Coat – Textured; Handle Diameter: 1.19" to 1.73”; Color-Coded Handle Stripes; Flat Base; Debossed Weight Indications.

Dumbbells, Medicine Balls, Kettlebells: Dumbbells : Weight range: 2.5LB to 125LB; Tolerance: +/- 3%; Handle Diameter: 25MM up to 10LB, 35MM for 12.5LB and above; Heavy-duty Rubber Encased Heads: minimize noise, floor damage, and wear and tear on the dumbbells themselves.; Easy-grip, ergonomic Chrome-Plated Handle; Proprietary head to handle construction ensures the head does not come loose - Medicine ball: Diameter: 14”; Coated Vinyl Shell – moisture and scuff resistant; Soft Shell safe to use at high speeds, but strong enough to maintain stable shape; Double-stitched nylon threading on the seams of balls weighing 14LB or more.; Weight Options: 4LB, 6LB, 8LB, 10LB, 12LB, 14LB, 16LB, 18LB, 20LB, 25LB, 30LB; Colour: Black; Kettlebells : Ductile Iron, Single Cast Construction, 18 Available Weight Increments, from 9LB to 203LB; Bell Dimensions: Vary By Weight; Finish: Black Powder Coat – Textured; Handle Diameter: 1.19" to 1.73”; Color-Coded Handle Stripes; Flat Base; Debossed Weight Indications.

Medicine Balls: Diameter: 14”; Coated Vinyl Shell – moisture and scuff resistant; Soft Shell safe to use at high speeds, but strong enough to maintain stable shape; Double-stitched nylon threading on the seams of balls weighing 14LB or more Weight Options: 4LB, 6LB, 8LB, 10LB, 12LB, 14LB, 16LB, 18LB, 20LB, 25LB, 30LB; Colour: Black.

Slam Balls: Sold Individually; Weight Options: 10 LB, 15 LB, 20 LB, 25 LB, 30 LB, 35 LB, 40 LB, 45 LB, 50 LB; Grip-friendly, rubberized exterior shell, Diameter: 9" (10LB - 30LB balls), 10" (35LB - 50LB balls), 2 Year Warranty.

Kettlebell: Ductile Iron, Single Cast Construction, 18 Available Weight Increments, from 9LB to 203LB; Bell Dimensions: Vary by Weight; Finish: Black Powder Coat – Textured; Handle Diameter: 1.19" to 1.73”; Color-Coded Handle Stripes; Flat Base; Debossed Weight Indications.

Power Bands: Colour: Various Colours: NoLength: 41"Material Type: Natural Latex Rubber.

Chains: Use a weight in chains that is around 10-20% of your 1 rep max for the exercise you are doing.; 1/2" Kit is ideal for a beginner lifter whose lifts are below 200LB 5/8" Kit is ideal for someone whose maxes are 200-300LB; Two 5/8" Kits are ideal for someone whose maxes are 300-500LB.

Tire + hammer: Weight Options: 60 kg & 80 kg Looking for the ultimate fitness training tool to challenge your strength? Our heavy-duty tires are available in two weight variants—60 kg and 80 kg—so you can choose based on your training goals.; Expect a weight variation of 5 to 10 kg due to wear and tear, as these are repurposed, old tires.; Whether you prefer working out indoors or outdoors, this Gym Fitness CrossFit Sledgehammer Tire is versatile enough for both environments. Indoors, you can use it for exercises like touch steps, hammer strikes, push-ups, jumping drills, and more. Outdoors, you can push yourself with tire flips, waist pulls, and resistance running—activities that engage your entire body and promote rapid muscle growth.; Choose your weight, challenge your limits, and transform your fitness journey!

Bulgarian Bag 5 KG: Bulgarian Bag Original High Quality Genuine Leather from 6 lbs to 11 lbs.; The Bulgarian Bag; Original is made of the highest quality leather available and filled to exact weight specifications with both wool and sand.; 2 Year Warranty for all leather products UWW Recommended.

Bulgarian Bag 10 KG: Bulgarian Bag Original High Quality Genuine Leather from 22 lbs to 30 lbs; The Bulgarian Bag Original is made of the highest quality leather available and filled to exact weight specifications with both wool and sand.; 2 Year Warranty for all leather products UWW Recommended.

Bulgarian Bag 15 KG: Bulgarian Bag Original High Quality Genuine Leather from 22 lbs to 30 lbs.; The Bulgarian Bag Original is made of the highest quality leather available and filled to exact weight specifications with both wool and sand.; UWW Recommended; 2 Year Warranty for all leather products.

Bulgarian Bag 20 KG: Bulgarian Bag Original High Quality Genuine Leather from 22 lbs to 30 lbs.; The Bulgarian Bag Original is made of the highest quality leather available and filled to exact weight specifications with both wool and sand.; UWW Recommended; 2 Year Warranty for all leather products.

Weight Jacket (15kg): Weight (Unloaded): 1.75LB (Medium)Size Options: Small, Medium, Large Compatible with Cast Plates and Echo Cast Plates up to 20LBPlate Pocket Dimensions: 10.25" x 12.5” (outside width / height) Large Velcro platforms for nameplates and patchesReflective logo on front of vest and cat eyes patch platform on back for visibility in low-light conditions Built-in shoulder padding made of closed cell foam with stretch woven wrapVelcro® around shoulder straps to secure hydro tube routingBuilt-in elastic on torso strap for comfortZero irritation lining Care Instructions: Hand Wash, Line Dry.

Weight Jacket (18kg): Weight (Unloaded): 1.75LB (Medium); Size Options: Small, Medium, Large Compatible with Cast Plates and Echo Cast Plates up to 20LB; Plate Pocket Dimensions: 10.25" x 12.5” (outside width / height); Large Velcro platforms for nameplates and patches; Reflective logo on front of vest and cat eyes patch platform on back for visibility in low-light conditions; Built-in shoulder padding made of closed cell foam with stretch woven wrap Velcro® around shoulder straps to secure hydro tube routing; Built-in elastic on torso strap for comfort; Zero irritation lining Care Instructions: Hand Wash, Line Dry.

Weight Jacket (20kg): Weight (Unloaded): 1.75LB (Medium); Size Options: Small, Medium, Large Compatible with Cast Plates and Echo Cast Plates up to 20LB; Plate Pocket Dimensions: 10.25" x 12.5” (outside width / height); Large Velcro platforms for nameplates and patches; Reflective logo on front of vest and cat eyes patch platform on back for visibility in low-light conditions; Built-in shoulder padding made of closed cell foam with stretch woven wrap Velcro® around shoulder straps to secure hydro tube routing Built-in elastic on torso strap for comfort Zero irritation lining Care Instructions: Hand Wash, Line Dry.

Bosu Ball: Half-round ball (diameter 65cm) challenges the entire body with integrated, multi-joint movements requiring muscle groups to simultaneously work together. non-slip, dually over-moulded base meant to withstand continual daily gym ge. Latex-free, burst-resistant material; 1-year limited warranty; Colour: Blue, Black dually over-moulded platform for extra strength Smooth, non-skid, non-marking base; Holds up to 159 kg (350 lbs.); Weight: 9 kg (19 lbs.); Diameter: 65 cm; Height: 25.4 cm (10”) when fully inflated.

Climbing Rope: No SheddingKnots. Custom ropes give you more flexibility on knot placements.Will not tear up your handsExtra thick rope. The 1,5" thickness is bigger than most and improves hand strength, making this an excellent option for sport training. Be Aware: Rope climbing can be dangerous!; Training Systems do not recommend climbing ropes without using several landing pads at the base of all climbing ropes.All ropes and securing hardware should be checked regularly and replaced at the first sign of wear.End cap to prevent fraying for a lasting ropeWith the added benefit of a reinforced metal clamp providing a solid attachment point to any rig, bar or mounting bracket for easy installation. (SUBJECT to what you are mounting this product to you can run it through itself, a chain or use a carabiner)Great grip that won't get sweaty mid -workout.Strong enough to tow a vehicle.

Battle Rope: Polypropylene rope with handles Length: 50’; Weight: 25LB; Diameter: 1.5"; Handle Length: 7.5”; Use only with secure anchor.

TRX Hirst: Muscle-target raining machine. If you like the bands and resistance training and you wish to do target training on certain muscle groups, the H.I.R.T.S. Trainers included in the H.I.R.T.S.; Strong model: Components included in the Heavy & Light packages: Anchor belt (x1); Resistance bands (x6); Climbing rope (11ft in length) (x1); Handles (x2); Metal bar (x1); Metal bar case (x1); Waist belt (x1); Ankle belts (x2); Small carabiner (x2); Backpack (x1).

matta sports

SANRIT IMPEX PVT. LTD.