AIC/AED/NIeT-650/25-26/Gr_4

Earth work in excavation of foundation trenchas etc. in all sorts of soll (including mixed soll but excluding Laterits of sandstone) Including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item Includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom property Incheiding balling /pumping out water from the bed, as required & directed by the Engineer-in-charge, complete with depth of excavation not exceeding 1.50 m.

Single Brick Flat Soling of picked Jhama bricks including ramming and dressing bed to proper level and fitting joints with powered earth or local sand, as per direction of Engineer-in-Charge

Cement Concrete with graded stone ballast (40 mm size) excluding shuttering etc., as per direction of Engineer-in-charge, complate. In 6:3:1 proportion.

Filling in foundation or plinth by Silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water ramming complete, including the cost of supply of silver sand (Payment to be made on measurements of finished quantity)

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. With earth obtained from excavation of foundation.

Ordinary Coment concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcensent if any, in ground floor as per relevant 15 codes. / Pakur variety

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups/binders eta. Including supply of rods, Initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every Inter-section, complete as per drawing and direction. Tor/Mild Steel. Engieer-in-Charge. Other than JSW/SHYAM/SRMB

Hire and Labour Charges for shuttering with contering and necessary staging up to 4 m using approved stout props and trick hard wood planks of approved thickness with required bracings for concrete slabs, beams, columna, lintels, curved or straight Including fitting, fixing and striking out after completion of works. Using 25 mm to 30 mm thick wooden shuttering es por direction of EIC, complete

Brick work with 1st class bricks in coment mortar (6:1) (a) In Superstructure

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Plaster (to wall, floor, ceiling etc.) with sand cement mortar Including Rounding off or chamfering comars as directed and racking out joints or roughening of concrete surface, Including threading nosing and drip Course where nesessary.

Plaster (to wall, floor, ceiling etc.) with sand cement mortar Including Rounding off or chamfering comars as directed and racking out joints or roughening of concrete surface, Including threading nosing and drip Course where nesessary. (ii) With 1:3 cement mortar, c) 10 mm thick plaster

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white

Applying decorative cement based paint of approved quality including cleaning the surface including scraping the same thorougly (plastered or concrete surface) as per manufacturer's specification./Two coats

Providing and erecting direction and place Identification retro-reflectorised sign as per IRC: 67 made of bigh Intenalty grade sheeting vide clause 801.3, fixed over aluminium sheating, 2 mm thick with area exceeding 0.9 sqm supported on a mild sleul angle iron poat 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade coment concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level sa per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

Sub Total

Please Enable Macros to View BoQ information