SPECIAL REPAIR TO BLDG NO T-02 RECREATIONAL HALL OF 137 CETF BN (TA) AND PROVN OF WALKING PLAZA FOR SOLDIERS AND THEIR FAMILIES AND GREEN/LUNG SPACES AT VD ROAD AT NEW CANTT PRAYAGRAJ

Dismantling of structural steel work including doors , gates exc framed trusses etc complete all as specified and directed.

Dismantling asbestos cement/galvalume sheet (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.

Taking down cement plaster on brick or stone walls incl wall tiles etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge

M&L for Rendering 15mm thick in cement mortar CM 1:4 in external surface of and finished even complete all as specified and directed.

M&L for Rendering 10mm thick in cement plaster 1:6 on any fair faces of brick work or concrete surfaces finshed even complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge

M&L for Non-Skid coloured vitrified tiles(GVT) 10 mm thick, (square/rectangular) area of tiles exc .18 sqm and n exc .38 sqm in each tilwe as in floors,skirting and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying glazed tiles in floors etc complete all as specified and as directed by the Engineer-in-Charge Note: 15mm thick Screed bed paid in separatve items

M&L for vitrified pavement outdoor polkadot tiles of 300mm X 300mm X 9-10mm thick coloured for floor /pavement etc and jointed in solvent and pointed in coloured cement to match the tiles including 15mm thick screed bed or bedding layer ie. cement mortar (1:6) complete all as specified and as directed. (Make: Somany (Durastone)/Kajaria (Duratech)/Johnson (Endura).

M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.

M&L for 18 to 20 mm thick Granite work (table rubbed and polished) in cooking platforms and similar works in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:6 in repairs complete all as specified and directed.

M&L for moulding to the ends of granite as in cooking platform complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for 0.50 thick (including coated thickness) pre-colour, plain type sheet (Galvalume/Zinkalume) any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,used as in ridge fixed with self tapping screws all as per manufacturer/profile maker instruction complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc(Fe 410-W(Gde E-250) quality-A ) etc complete all as specified and directed.

Taking down Chowkats or frames with shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

S&F for 2nd class hardwood of 35mm thick factory made shutter framed panelled shutter(two number of panle) with lock rail and panel of 9mm B.W.P commercial ply or 12mm venneered particle board with commercial vennering on both side .the size of rail and stiles as per IS:10039(part -1), klin seaasoned and chemicaaly pressure treated and ftted to chowkhats complete all as specified and directed.

S&F for Aluminum section powder coated anodised aluminium (sliding type) three track windows with sliding shutter and frame series c with aluminum section of size including 4.8mm thick glassand Stainless stell mosquito proffing net as indicated below complete all as specified and directed. (i) frame size 92x29.5x1.2mm (ii) shutter with section bearing bottom ad top size 40x18x1.250, fixing with hinges including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised snape beading, screws etc with (iii) Glass 4.8mmmm thick sun control plain glass in panels incl all fitting and fixture complete all as spesified and directed . (iv) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple (v) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron (vi) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE.

S&F for powder coating aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. (minimum thickness of powder coating 50 micron).

S&F for 4.8mm thick sheet glass ordinary quality any size and in any type of frame and glazing with rubber beading in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

S&F for MS 0.80 mm thick MS plain black sheet in steel gates, windows projection similar work, cut to size, holes punched, including round headed screws and fixed to steel framing with plain 40mm lap joints with riveted or welded as required. complete all as specified and directed.

M&L for 0.63mm thick Plain, black, mild steel sheeting, in ridges,valley gutters, drip and straight flashings welded to existing rails or steel fixed to slopy roof complete all as specified and directed. (length2021-05-21 SSR Part II 2020.pdf

M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290. complete all as spcified and directed .

M&L for zinc plated pin drive expansion bolts- hammer stike pin Anchor fasteners size 10mm x100mm fixed to brick or concrete wall through steel framed structure in windows projecting frame or similar structure etc complete all as specified and directed.

S&F in repair powder coated GI ceiling suspension system false ceiling grid of 600x 600mm size and 0.30 mm thick (MS galvanized (PPP CGS)) with main tee, cross tee and wall angle grid hanging with 4mm dia Gl wire and roof fasteners or butterfly clips etc complete all as specified and directed.

S&F in repair 4 mm thick non asbestos fiber cement building board of 600x600 mm in size (HPSC E-classic) decorative finish fixed to aluminum /CGI frame work with hold down clips in false ceiling complete all as specified and as directed.

S&F in repair fancy type decorated Stainless Steel curtain hanging rods 20 mm dia,and fixed to stainless steel bracket for hanging curtain and bright colour decorative ends fixed to end complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying glazed tiles in floors etc, complete all as specified and as directed by the Engineer-in-Charge

S&F for Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F for Second class hardwood glazed and skeleton door and windows shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S&F for 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as spesified and directed .

S&F for 300 mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as spesified and directed .

S&F for 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as spesified and directed .

S&F for 150mm long Aluminium anodised barrel tower bolts of extruded section complete all as spesified and directed .

S&F for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spesified and directed .

S&F for floor door stopper of aluminum alloy body and tongue anodised with hard drawn steel spring fixed in repairs complete all as specified and directed.

S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

M&L for complete removing existing treatment on wall surface and applying two coats of oil bound distemper over one coat of 1mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of cement based paintover a coat of primer etc complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted Steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engineer-in-Charge.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of new plaster surfaces of walls and applying two coats of oil bound distemper over one coat 1mm thick wall care putty complete all as specified and directed by Engg-in-Charge.

M&L for PCC 40mm thick 1:2:4 Type B-1 using 20mm graded stone aggregate as in levelling and flooring and paving etc complete as complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm granted stone aggregate as hold fast/filling in pressed steel frame coping around path,benching over chajjas or similar work, complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) for plinth protrction etc complete all as specified.

M&L for RCC type B-0, 1:2:4 using 12.5mm graded stone aggregate as in kitchen shelves etc including demolation of old slab complete all as specified and directed.

M&L form work to suspended slab as in kitchen shelves etc complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm

M&L for TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealed not less than .9 mm dia or securing with clips complete all as specified and directed.

S&F for 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F for PVC SWR (110) bends any radius comlete all as specified and directed.

M&L for surface dressing n exc 30cm but avg 15cm deep and getting out in soft /loose soil complete all as specified and directed.

M&L for broken stone or boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 for seating bench and chair including special shaped washer etc. including grounting of bench legs in 1:2:4 pcc block and embeded in ground complete all as specified and directed.

S&F for Mild screw bolt Machine made with hexagonal or square head at one end and scewed at another end or screwed at both end to be fitted with washer exc 10cm and n exc 15 cms long of shank dia 16 mm to 20 mm complete all as specified and directed.

M&L for 100 mm thick type D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 80mm thick coloured rubber moulded finished inter locking paver block with grey cement and pigment of any type and shape the minium compressive strenth not less then 350 kg/sqcm as approved complete all as specified and directed.

M&L for 25 mm Sand filling under floor including watering and consolidation. complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of new or previously untreated surface concrete or brick or stone over 10cm of girth or width not otherwise descibed and applying two coats of synthetic enamel paints complete all as specified and directed.

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed.

M&L for point wiring with concealed in wall 1.5 sqmm (nominal area) FRLSH PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of appropriate size concealed in wall and modular sunken box, cover plate/frame any module as required at site with all accessories as specified including 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for fan / light / exjaust fan/ bell point controlled by one switch and single conduit shall be used for each circuit. Note:- 1. Cost of PVC conduit, with connected item to be included in the quoted rate.2. M&L for cutting chases on walls / ceiling and making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate.3. Modular metal box, cover plate & frame for any module to be included in the quoted rate.

All as per item No. 64 here-in- before but for 3 pin 5 Amps switch socket on independent board with 1.5 sq mm copper cable complete all as specified and directed.

All as per item No. 64 here-in- before but for 3 pin 15 Amps switch socket n on independent board with 4 sq mm copper cable including 4 Sqmm FR PVC insulated unsheathed multistranded copper earth conductor to common earth complete all as specified and directed.

All as per item No. 64 here - in - before but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed.

S&F for modular switch 1 way, 6 amps, 230V AC, one way complete all as specified & directed.

S&F for modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed.

S&F for modular switch flush type 16 amps, 230V AC single pole one way complete all as specified & directed.

S&F for modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F for ceiling rose surface backelite three terminals complete all as specified and directed. Make Anchor/havells/legrand

S&F for modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection complete all as specified & directed.

Supply and fixing in replacement of Decorative ultra slim square profile LED lighting fixture 18 watt, 120 lumen per watt 4' long batten with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps complete all as specified and directed.

Supply and fixing and replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F for on wall building security light luminaire for 1x35 w LED with deep drawn housing complete with and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor including bracket made out of 32 mm bore GI Light grade 1.20 M long to required shape as in bracket for to shape fixed on wall/pole with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers including painting complete and taking down unserviceable one complete all as specified and directed.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TP & N 4 way (vertical load line distribution board) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates including 4 pole MCCB 125 Amp 25 KA - 01 fixed type Nos and TPN/TP/SPN/SP MCB 63 Amps 'C' curve 10 KA asper site requirement outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB all as specified. NOTE :-(a) MCB and MCCB cost shall be included under respetive item of sch. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in replacment of factory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-43), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar , SP&N 8 ways ,220 volts Note: MCB/ shall be measured and paid seperatly under respective item of this schedule complete all as specified and directed.

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing in replacment of 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 40/63 AMP, in the MCB DB Complete with connection testing and commissioning.

M&L in replacment of two single core (submain) FRLS PVC insulated cable of 6.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 6.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed. Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

Supply and fixing of GI pipe light grade of size 15 mm bore for laying in trenches/floors or walls including all fittings for fixing complete as required and directed by Engineer-in-Charge.

M&L for earth continuity conductor or main earthing lead 4 mm dia GI or steel wire fixed to wall on batten or recessed or buried in ground or drawn in conduit/pipe complete all as specified and directed.

Supply& fixing Garden light LED Bollard type design die cast aluminium for down ward lighting with high power 7/8 W LED including IP 66 to ensure sustainable performance in all sections and aesthetics which keeps the surrounding lively with PVC Connector & sheathed stranded copper conductor cable three core of size 2.5 Sqmm complete all as specified & directed (Make-Havells/Phillips/Benlo/ as approved by GE)

Supplying and fixed sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 2 way with 200 amps rated bus bar SPN double door complete including necessary clamp fixing the same bottom of the pole complete all as specified and directed. Make :- Indo Asian/ Standard /Havells.

S&F for MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating complete all as specified and directed. Make Indo Asian /Havells/ schneider

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate for foundation for bollard light foundation including necessary form work complete all as specified and as directed

S&F for Weather proof Cable with copper conductor PVC round sheathed (flexible) industrial cable 6 Sqmm 2 core including Earth work are deemed to be included in quoted rate complete all as specified and directed.

Schedule of Credit (MINUS) Rs. 54,257.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum