864/WS-50/2021-22

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for laying of cables/errection of pole etc n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Ditto all as per item No. 1.00 described here-in-before but exc 1.5m and n.exc 3.00m in depth

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soils complete all as specified and as directed.

Removing excavated material/soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for sand cushioning with a layer of river sand 23 cm thick under and above the cable complete all as specified and as directed (Note: Punned thickness upto 18cm thick shall only be measured and paid)

Supply and lay sub class burnt bricks of size 23x11.5x7.5cm for cable protection complete as specified as directed

M&L for PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foundation of poles complete as specified as directed

M&L for PCC (1:3:6) type C1(using 20mm graded crushed stone aggregate) for copping of poles/stays incl necessary form work complete as specified as directed

Supply and lay XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 10 Sqmm, 4 core laid in trenches including taking up or down old/ unsv cable complete as specified as directed.

Supply and lay XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 6 Sqmm, 2 core laid in trenches including taking up or down old unsv cable complete as specified as directed.

S&F in replacemet of MCCBs, TP / FP 415 Volts 50HZ adjustable incl complete connections with incoming cable and out going cable with suitable thimbles and crimping the thimbles with crimping tools insulating the naked portion with insulation tape as under:- MAKES :- LEGRAND,SIEMENS,HPL,SCHNEIDER

MCCB 63 Amps TP, 415 volts 16 KA with thermal setting

MCCB 160 Amps 4 poles, 415 volts 35 KA with thermal and megnatic setting

MCCB 200 Amps 4 pole, 415 volts 35 KA with thermal and megnatic setting

M&L for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using aluminium strip 25x 3mm dia as earthing lead (upto the body of the equipment max up to 7 mtr length) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe light grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical Plate No 3 of SSR 2009 (Part-I) in repair complete all as specified and as directed.

M&L for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and connected togalvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 25mm dia GI pipe connected to main switch board or main control board and GI pipe light grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical Plate No 3 of SSR 2009 (Part-I) in repairs complete all as specified and as directed.

S&F in replacement earth continuity conductor lead fixed to wall on batten buried in ground or drawn in conduit/ pipe or fixed to pole/ wall or any other indicated situation etc. as required aluminum Strip 25 x 3 mm with saddles and fixing screws etc complete all as specified and directed.

Dismantling of steel tubular pole 9 Mtr long complete all as specified and directed.

Fixing only steel tubular pole type 410 SP-31 (9 Mtrs long) serviceable pole retieved from item No. 15.00 above complete all as specified and directed. (Note: Excavation, earthwork and PCC shall be measured and paid seperately under relevant items)

Supply and erecting in vertical position steel tubular swaged pole type 410 SP-31 (9 meter long) with 300mmx300mmx6mm mild steel base plate continuously welded to pole, finial taper, nut, bolts and screws all as specified including factory painted with two coats of black bituminous paint internally through out and externally for embedded portion and applying one coat of red oxide primer for the remaining portion and two coats of aluminium paint beyond 1.5M from ground level/coping and making 30cm black and white strips with two coats of super enameled paint up to 1.5M from ground level/coping complete all as specified and directed. Make : Jindal Steel Product/Zain Industries Srinagar/Advance Tube Jammu.

S&F of FRP cable looping boxes with PVC sheet finish inside including MCB SP 1 No, heavy duty PVC connector 4 way Terminal strip 01 No & fixed to pole with suitable size clamp with nuts, bolts including taking down old/ unsv FRP cable looping boxes complete all as specified and directed. Make : Sintex / HPL /HENSAL

S&F in replacement for street light panel 6 KW confirm to IS/ IES 60947-4-1 suitable for single phase MCB rating 40 amps on /off timer Astronomical, conractor rating 32 Amp including internal wiring in built short circuit protection, IP-54 complete all as specified and directed. Make : Sintex / HPL /HENSAL

S&F in replacement Bracket made out of GI tubing medium grade 40 mm bore, 90 cm long including MS clamps made out of MS flat iron 25 x 10 mm, nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed.

S&F in replacement LED Street light fitting 70/72W, pressue die-cast aluminum complete fixing arragne ment complete all as specified and dircted. Make:-WIPRO,PHILIPS,SYSKA SCHNEIDER, HAVELLS

S&F in replacement LED light driver unit suitable for LED light fitting of capacity 40 to 60 watt complete, all as specified and as directed. Make:- Bajaj / Pjilips / Havells / Surya/Gold win.

S&F in replacement LED light driver unit suitable for LED light fitting of capacity 70 to 90 watt complete, all as specified and as directed. Make:- Bajaj / Pjilips / Havells / Surya/Gold win.

S&F in replacement LED light driver unit suitable for LED light fitting of capacity 120 to150 watt complete, all as specified and as directed. Make:- Bajaj / Pjilips / Havells / Surya/Gold win.

Supply and lay XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts sgrade, cross sectional area 35 Sqmm, 3.5 core laid in trenches including taking up or down old/ unsv cables complete, all as specified and as directed.

Supply and lay XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts sgrade, cross sectional area 25 Sqmm, 4 core laid in trenches including taking up or down old/unsv cable complete, all as specified and as directed.

S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts sgrade, cross sectional area 16 Sqmm, 4 core laid in trenches including taking up or down old/unsv cable complete, all as specified and as directed.

S&F in replacement Flood light fitiing 120W LED energy saving environmental friendly long life exclusive innovative die cast aluminum IP 65 flood light with hiah power LEDs as light source suitable for highlighting architechtural features or retail spaces complete all fixing arrangement complete all as specified and diretced. Make:-2,WIPRO,PHILIPS,HALONIX, SCHNEIDER HAVELLS, BAJAJ

Repairs/servicing of LT panel board incl welding of doors, painting, cleaning connecting with new copper wires of various sizes complete all as directed by Engr-in-Charge Note: Fittings shall be measured separately.

S&F in replacement landscape lights / garden light fittings elegent yet minimalstic design acts as silent observer and giving lights, diffuser at the upper portion acts as beacon of path guidence in a landscape environment suitable for 240 volts 50 Hz AC Supply of capacity 8 watt LED including making connections and construction of foundation of size 150mm x 150mm x 200mm with PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) and fixing PVC pipes suitable dia inside concrete for fixing of incomming and outgoing cables etc complete all as specified and directed. Make - Havells (Cone, IP 65) or equevelent in Bajaj / Philips.

S&F in replacement service cable 10 Sqmm twin core 1100 volts grade heavy duty cable PVC insulated aluminium standard conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat or circular fiixed on poles/walls complete all as specified and as directed.

S&F in replacement service cable 6 Sqmm twin core 1100 volts grade heavy duty cable PVC insulated aluminium standard conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat or circular fiixed on poles/walls complete all as specified and as directed.

S&F in replacement of 2 runs of PVC insulated 1.5 sqmm single core multistranded aluminium conductor cable and one run of 1 sqmm copper wire as earth continuity conductor drawn through and incl rigid non metalic conduit 20 mm external dia fixed on poles & connecting up all as specified and as directed. Note: Two runs of cable and one run of earth wire and one run of conduit shall be measured as one length.

S&F in replacement Change over switch On/Off load 4 pole 200 Amps complete fixing arrangement all as specified and dircted. Make : Hager/GE/SIE Mens

S&F in replacement Change over switch On/Off load 4 pole 100 Amps complete fixing arrangement all as specified and dircted. Make : Hager/GE/SIE Mens

S&F in replacement Change over switch On/Off load 4 pole 63 Amps complete fixing arrangement all as specified and dircted. Make : Hager/GE/SIE Mens

Supply, installation, testing and commissioning in replacement of LT Panel board suitable for 415 Volts, 3 Phase 4 Wire, 50 Hz AC Supply System confirming to IS:8623/93, Outdoor type floor mounting along with factory made type panel weather proof, vermin proof, fully ventilated and fabricated out of MS CRCA sheet of 3.15mm thick having copper bus bar of rating 600 Amps, three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. The panel shall be front openable and having inner & outer shells. The inner shell duly compartmented for each control gear, including Powder coating internally and externally the entire steel surfaces. All the cover shall be provided with suitable locking arrangements. The size of the outer shell should not be less than 1200mm x 1400mm x 450mm, mounted on angle iron stand of minimum 60 cm height from the PCC grounting made out of angle size 50 X 50 X 6 mm grouted in PCC 1:3:6, including accommodating the following controls gears and suitable size of Digital volt meter & Digital Amp meter with CTs. (A) IN COMING (a) MCCB 4 pole of rating 630 Amps 36 KA with electronic release type, (Ics=100%Icu). Make: Legrand Cat No.422063 or equivalent Make of Schneider/ Siemens/L&T -01 No (b) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No (c) RYB LED indicating lamp panel mounting type (Set of three) - 01 No. (B) OUT GOING (a) MCCB 4 pole of rating 200 Amps 16 KA with thermal and magnetic release type, (Ics=100%Icu). Make: Legrand Cat No.420218 or equivalent Make of Schneider/ Siemens/L&T - 02 Nos (b) MCCB 4 pole of rating 160 Amps 16 KA with thermal and magnetic release type, (Ics=100%Icu). Make: Legrand Cat No.420015 or equivalent Make of Schneider/ Siemens/L&T- 02 Nos (c) Drg of Lt Panel shall be approved by GE. Make : Schnieder/L&T/Legrad

S&F in replacement air break (switch) 11000 volts insulator triple pole mechanically operated mounted on insulator and steel frame with operating mechanism worked from ground level for current rating up to 200 amps complete all as specified and diretced. Make:Rastriya/ Jiapuriya/ GE

Supply and laying in replacement synthetic Rubber insulated mats 2mm thick for voltage up to 11Kv for electrical purpose as per IS 15652- 2006 (superseding IS 5424) suitable for electrical shock safety of size 2MX 1M complete all as specified and diretced.

S&F in replacement LED Solar street light fitting 20/24 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor, complete all as specified and diretced. (Excavation & earth work shall be measured separtely)

Supplying and laying in replacement un-reinforced precast concrete cable cover, class HVP type 1 with peak, size 300mm x 18mm x 40mm complete all as specified and diretced

M&L for dismantling the steam boiler coil & descaling of Steam Boiler 600Kg/Hr by opening of boiler coil cover from the both sides including disconnecting of inlet and outlet water connections of the boiler closing both side of coil and circulating the descaling compound solution in tubes of boiler through the separate circulating pump and allow the descaling solution to hold for 1hr for chemical reaction. After the duration of 1 hr open the coil ends and ensuring that the coil has been descaled upto max clean range , then closing both the ends of the coil and circulating clean water in the tubes of boiler and draining it out, the process will be continued till the satisfaction of Engr-in-Charge then refixing the coil inside the chamber complete with all fixing material required at site:

Supply & fixing in replacement of photo cell complete with holder. Model-8205. Make; ECEE Thermax

Supply & fixing in replacement of ignition transformer (14500V). Make : Danfoss

Supply & fixing in replacement of Pressure gauge 4'' dia Connection centre back mount, dial range - 20 kg to 25 kg as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of temperature gauge dia 2'' Connection centre back temperature road as per sample complete all as directed by Engr-in-Charge.

S&F in repacement of electric hooter for boiler 600 Kg/hrs as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of heavy duty steam pressure gate/ball Valve 15 to 25 mm dia as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of heavy duty NRV valve 15 to 25 mm dia, as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of copper tube dia 8 mm/12 mm as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of heavy duty inlet/outlet hose pipe with wire mesh of any size and any length as per sample complete all as directed by Engr-in-Charge.

M&L for rewinding of burnt motor from respective laundry/CHS machines by disconnecting all electrical and mechanical connections and reassembling, testing of the same after carrying out rewinding of motor of under mentioned capacity single/three 3ph 415Volt, 50Hz with supper enamelled copper wire having same gauge after taking out old burnt winding including replacement of bearing complete and all as specified:- -1HP to 2 HP

M&L for rewinding of burnt motor from respective laundry/CHS machines by disconnecting all electrical and mechanical connections and reassembling, testing of the same after carrying out rewinding of motor of under mentioned capacity single/three 3ph 415Volt, 50Hz with supper enamelled copper wire having same gauge after taking out old burnt winding including replacement of bearing complete and all as specified:- -3HP to 5 HP

M&L for rewinding of burnt motor from respective laundryCHS machines by disconnecting all electrical and mechanical connections and reassembling, testing of the same after carrying out rewinding of motor of under mentioned capacity single/three 3ph 415Volt, 50Hz with supper enamelled copper wire having same gauge after taking out old burnt winding including replacement of bearing complete and all as specified:- -7.5 HP to 10 HP

M&L for rewinding of burnt motor from respective laundry /CHSmachines by disconnecting all electrical and mechanical connections and reassembling, testing of the same after carrying out rewinding of motor of under mentioned capacity single/three 3ph 415Volt, 50Hz with supper enamelled copper wire having same gauge after taking out old burnt winding including replacement of bearing complete and all as specified:- -12.5 HP to 20 HP

Supply & fixing in replacement of V Belt for Washer Extractor of capacity - 60 Kg, as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of Main drain valve (actuator butterfly valve) for Washer Extractor of capacity - 60 Kg, as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of Main water inlet valve (actuator butterfly valve) for Washer Extractor of capacity - 60 Kg as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of single solenoid valve for Washer Extractor of capacity - 60 Kg, as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of Door gasket for Washer Extractor of capacity - 60 Kg, as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of Hose pipe of dia 4" for Washer Extractor of capacity - 60 Kg, as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of V Belt for washer extactor of capacity - 30 Kg, as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of Flannel Cloth for flat work ironer Size 32''x13'', as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of Final cover for flat work ironer Size 32''x13'', as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of Main drive V belts for Drying tumbler as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of Automatic steam inlet valve for Drying tumbler as per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of Contactor for Drying tumbleras per sample complete all as directed by Engr-in-Charge.

Supply & fixing in replacement of solenoid Valve for Vaccum ironing machine as per sample

Supplying, mixing and filling of mono ethylene glycol concentrate along with the necessary additives and inhibitor in cognition, required for operation of plant and network. The mixing freezing temperature shall be minus 10 degree C all as sprecified and directed by Engr-in-Charge.

Supply and mixing Hydro caloric acid (HCL) concentrate.

Supply and fixing in replacement under mentioned items for oil fired incinerator model PY-VS-75 as per sample complete all as directed by Engr-in-Charge. :-Photo cell

S&F Fuel filter element per sample complete all as directed by Engr-in-Charge.

S&F Thermo couple K type per sample complete all as directed by Engr-in-Charge.

S&F Pressure gauge 0-40 Kgs/Cm 2-1/4" BSP per sample complete all as directed by Engr-in-Charge.

S&F Electrode front pair per sample complete all as directed by Engr-in-Charge.

S&F in replacement of solenoid valve of incinerator as per sample complete all as directed by Engr-in-Charge.

S&F Electrode rear pair as per sample complete all as directed by Engr-in-Charge.

S&F Sequence controller as per sample complete all as directed by Engr-in-Charge.

S&F oil seal for fuel pump as per sample complete all as directed by Engr-in-Charge.

S&F HT cable as per sample complete all as directed by Engr-in-Charge.

S&F Spider LO-70 (Rubber Bush) as per sample complete all as directed by Engr-in-Charge.

Supply and mixing industrial salt in water for descaling for steam boiler 600 Kg/hr

S&F in replacement of touch screen HMI for washer extractor 60/30 Kg or as per site reqirement as per sample.

Supply and mixing descaling compound for steam boiler 600 Kg/hr per sample complete all as directed by Engr-in-Charge.

M&L for dismentaling/ opening of old damage heavy duty MS pipe alongwith fittings from bilers of 25 mm and repalcement with new as heavy duty MS pipe fitting as per site requirement including necessary threading, welding work, glange, gasket of any size with nut bolts complete all as directed by Engr-in-Charge.

M&L for dismentaling/ opening of old damage heavy duty MS pipe alongwith fittings from bilers of 20 mm and repalcement with new as heavy duty MS pipe fitting as per site requirement including necessary threading, welding work, glange, gasket of any size with nut bolts complete all as directed by Engr-in-Charge.

M&L for opening of Primary and Secondry chamber of incinerator and replacment of all damege/burnt items after repair reassemling of plant, as per sample complete all as directed by Engr-in-Charge.

M&L for high temprture resistance Painting of Incinretor boilers complete with synthetic high tempreture enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. (M & L Wire brushing and cleaning top surface complete all as directed by Engr-in-Charge

M&L for dismantling/ opening of laundary and after repair reassemling of plant, under mentioned items for laundary as per sample complete all as directed by Engr-in-Charge.

S&F Gland washer HTN008N for boiler Make: Aspee

S&F valve assembly HTB/ VA for boiler Make: Aspee

S&F air release valve high pressure Make: as per sample

S&F Butterfly valve high pressure25mm Make: as per sample

S&F Butterfly valve high pressure 20mm Make: as per sample

S&F NRV size 25mm Make: as per sample

S&F Blow down valve size 20mmMake as per sample

S&F Y Stainer size 15mm A 55 Make as per sample

S&F gate valve 15mm Make as per sample

S&F PVC washer for valve gauge HTB/002 Make: Aspee

S&F V belt size A 55 Make as per sample

S&F Gas kit for Loundry Make as per sample

S&F fuel filter Make as per sample

S&F fuel pipe Make as per sample

Supply & fixing of monoblock centrifugal pump driven by 3 HP capacity electric motor for re-circulation at 864 unit lines complete with accessoreis Make : Kirloskar/ Crompton Greaves

Supply & fixing of monoblock centrifugal pump driven suitable capacity electric motor for hot water supply having 100 lpm & 22 mtr head complete with accessories including pressure guage, pressure cutout switch, pressure tank, cement concrete foundation at 864 unit line complete all as per specified and directed. Make : Kiloskar/ crompton Greaves

Supply, installation, testing and commissioning of poly proplene random copolymer pies (PPR) 25mm OD pipes complete with fittings duly insulated with 10mm thick closed cell elastomeric insulation 30 to 40 Kg/m3 density.

Dismantling of boiler unit, taking out of boiler coil safely and M&L for aluminium cladding with aluminium sheet 13 mm around the boiler coil for heat resistance of the boiler installed at laundry paint and reassembling of all the parts all as per directed by Engineer-in-Charge.

VEDA INFRASTRUCTURE

M/S REDLY ENGINEERS

M/S ZENITH TRADE LINK

M/S M.A.S ELECTRICALS

ORISON ENTERPRISES

M/S Khan Hussain & Co.