Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.7 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹27.8 L+₹1.0 L (3.89%)Rejected-Finance 23 GOURI KUNJ COLONY RONTA AGRA 282009 | AGRA | AGRA | UTTAR PRADESH | 282009 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹27.9 L+₹1.2 L (4.55%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹28.2 L+₹1.5 L (5.48%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹28.7 L+₹2.0 L (7.52%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹27.8 L
EMD Value
₹55,700
Closing Date
30 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Ashwin Awadh
Ge West Agra
PROVN OF CERTAIN SANCTIONED WORK OF AGE B/R-II (W) AGRA UNDER GE (W) AGRA
2023_MES_612467_1
8012/989/E8
Open Tender
Civil Works
Item Rate
180 days
Ge West Agra
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
Ge West Agra
₹55,700
7 Nov 2023
7 Aug 2023
6 Sept 2023
7 Aug 2023
30 Aug 2023
22 Aug 2023
Amount
Surface excavation n.exc 30cm deep and averaging 27 cm deep and getting out in any type of soil.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed.
Excavation in trenches n exc 1.5 m wide & n exc 1.5m deep and getting out in any type of soil.
M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in fdn filling and mass concrete.
M & L for TMT 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beam and Fdn, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips
M & L for TMT 5mm dia and over, upto 10mm dia in stirrups/ties, spacers and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns/beam, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips
M & L for flat Rough finished formwork to plinth/ lintel beam, soffits, roof beams, lintels, cantilevers, shelves, similar work etc. including supports.
M & L for RCC (mix with mixture machine) Type B1 1:2:4 (20mm graded stone aggregate) in plinth Beams, lintel/roof beam, similar work etc.
M&L for brickwork with fly ash brick (old size) built in CM 1:6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.
Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 cm using soils
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
Spreading and levelling (Soil) in layers n exc. 25, well ramming including watering as required, complete all as specified and directed.
M&L for moorum/red bajri filling in floors/sub base or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed incl watering
M & L for hard core of broken stones or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
M & L for PCC 1:5:10 (75mm thick) Type E-2 using 40 mm graded aggr as in floor & subbase, similar work etc.
M&L for 30 mm thick cement concrete type B0 1:2:4 using 12.5mm graded aggregate as in floor complete all as specified and directed
S&F rolled section as in main and cross beams hip and angle, jack rafters, purlins where connected to common rafters and running rails and frame work of water stage, fixed with angle cleats or other connecting plates etc including steel primer coat, welding, confirming to Fe290 grade E-165.
S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, washer as specified.
S & F steel ventilators with top hung shutter with glazing bars, hinges, steel peg stay complete all as specified and directed.
S&F framed work such as guard bars, grills etc and similar work including welding/reveting, fixing with screws, nut bolt etc complete all as specified and directed.
S&F framed work such as hold fast and similar work including welding/reveting, fixing with screws, nut bolt etc complete all as specified and directed.
S&F Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification.
S&F Factory made solid PVC moulded door shutter 28 to 30 mm thick(stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specifications & drawings shown in section 8 of SSR Part II complete all as directed.
S&F Butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges,125 mm) complete all as specified and directed.
S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.
S & F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc.
M & L for two coat of synthetic enamel paint on new steel surfaces over one coat of red oxide primer including preparation of surfaces complete all as specified and directed.
M&L PCC 75 mm thick (1:3:6) type C-1 using 20 mm graded aggregate, plinth protection / sub base etc.
M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes.
M&L for coloured glazed digital ceramic tiles in vertical surface Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick screed bed in CM 1:4 as in verticle surface etc complete.
S & F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)
S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)
S & F vitreous China wash basin, white, flat back, size 630x450mm including bracket complete all as specified and directed.
S & F for waste pipe for WHB / urinal, 32/40 mm dia complete all as specified and directed.
S&F vitreous China squatting pan, Orrissa pattern with integral foot rest size, 580x440mm white, any pattern all as spfd including concrete bedding complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan pedestal pattern white (excl fixing bolt flushing cistern and flush pipe ) fixed in repairs complete with Zet sprey, seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device complete all as spfd and directed.
S&F low level flushing cistern of capacity 10 litre ISI marked complete with inlet ball valve, connection to pipes and handle including connecting flush pipe, bracket etc of Commander/Hindware/ complete all as specified and directed.
S & F for 15 mm bore, fancy type, chromium plated, pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, long screwed shanks and fly-nuts and fixed to pipe,complete all as specified and directed.
S & F 15 mm chromium plated Bib taps fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe) complete all as specified and directed.
S & F 15 mm chromium plated Stop valves, fancy type (angle valve) cast copper alloy screwed down high pressure with crutch or but terfly handle screwed both ends for iron pipe or for unions and fixed (15mm bore dia of pipe ) complete all as specified and directed.
S&F in repair soap dish, brass, chromium plated,size 100X60mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.
S & F PVC connections 15 mm dia with PTMT nuts of length 750 cm complete all as specified and directed.
S&F towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms)
S & F grating doom 100/125 mm dia with waste hole/without waste hole of PTMT/ CP. (Minimum weight 40gms)
S & F 75 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed by the Engineer-in-charge.
S & F 75 mm bore PVC (SWR) junction single (single T) equale or unequale complete all as specified and directed by the Engineer-in-charge.
S & F 75 to 110 mm bore PVC (SWR) reduce complete all as specified and directed
S & F rotational moulded polyethylene three layer water storage tanks with cover (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of water tank 1000 litres.
S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule for 20mm bore dia of pipe
S&F 15mm dia tubes medium grade galvanised, with all fittings and fixed complete, laid in floors/ wall complete all as specified and directed.
M&L for plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in coping, hold fast, gap filling of door frame, benching of MH, and similar work etc including necessary form work and all as directed.
M&L for 15mm thick rendering in CM 1:6 on concrete, brick/stone surfaces of wall finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15 mm thick on concrete/ brick/stone surface wall in cement mortar 1:4 mixed with liquid WPC @ 200 ml/50Kg of cement or as per manufactures's instructions, finished fair and even, complete all as specified and directed. Note:- WPC shall be measured and paid separately as supply only.
Supply only integral water proofing compound (Liquid) complete all as specified and directed.
M&L for applying two coats of cement based paint over a coat of primer on newly plastered surfaces including preparation, complete all as specified and directed.
M&L for applying two coats of white/colour washing on newly plastered surfaces of wall including preparation complete all as specified and directed
Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in soft soil.
M&L PCC 75 mm thick (1:4:8) type D-2 using 40 mm graded aggregate sub base of chequered tiles etc.
M & L for chequered cement concrete colour tiles 30cm x 30cm x 25mm thick, set, jointed with white cement & pigments and pointed in neat cement slurry including screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying in floors.
M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer with grey cement and pigment complete all as specified and directed.
M&L for filling sand cushion layer for laying interlocking pavers complete all as specified and directed.
S & F 110 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenchesor in floors all as specified and directed.
M & L for PCC 1:4:8 type D2 as in concrete bed 110mm bore of drain pipes including packing under, haunching against the sides of pipes after they are laid and tested.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed by the Engineer-in-charge.
S & F 110 mm bore PVC (SWR) junction single (single T) equale or unequale complete all as specified and directed by the Engineer-in-charge.
S & F 110 mm bore PVC (SWR) 'P' trap complete all as specified and directed
M&L for pre-cast RCC slabs as in drain/manhole covers in 1:2:4 type B1 using 20 mm graded stone aggregate, set in cement mortar (1:4) incl use and waste of form work complete all as speciied and as directed.
Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed masonary with top ring of M-25 Concrete, including intercepting chamber, screen chamber made of brick work in CM, RCC cover slab in M-25/ SFRC Cover interconnecting pipe of RCC/DWC complete filled with brick bats of size 2.4 Mtr x 6Mtr effective depth.
Demolition Cement concrete (Reinforced) in Roofs, floors, beams, staircases, landing, and similar work, complete all as specified and directed.
M & L for flat Rough finished formwork to plinth/ lintel beam, soffits, roof beams, lintels, cantilevers, shelves, similar work etc. including supports.
M & L for reinforced cement concrete (nominal mix) Type B1 1:2:4 (using 20mm graded stone aggregate) beams and columns in floors, slabs and in shelves etc.
Demolition of brickwork built in cement mortar including all quoins arches pillar etc.
M&L PCC 1:2:4 (20mm graded aggregate) type B-1 as in foundations, post hole, filling and coping incl necessary form work complete all as specified.
brick work using sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 but except brick.
Demolition of cement concrete (unreinforced) in gd floor and paving n.exc 15 cm thickness below or above the gd level.
M&L for 75 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in under floor and finished even and smooth without using extra cement incl necessary forming contruction joint.
Excavating over areas, n exc 1.5 M deep and getting out in any type of soil.
Excavating in post holes (or similar holes) each n. exc 0.5 cum, getting out,in any type of soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and making good surface
M&L PCC 1:2:4 (20mm graded aggregate) type B-1 as in foundations, post hole, filling and coping incl necessary form work complete all as specified.
M&L for brick work using sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed
S & F for joist chennel, MS Pipe, angle, flat, or tee section as in post and strut including all necessary welding, drilling riveting, bolts etc. similar work conforming to Fe 290 Gde E-165. complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet for ridges 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, washer as specified.
M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior paint or apex (any colour) silicon based over a coat of water based suitable primering as a base course as per manufacturer's instructions.
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height complete all as specified & directed.
M&L for 15mm thick rendering in CM 1:6 on concrete, brick/stone surfaces of wall finished even and smooth without using extra cement, for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height complete all as specified & directed.
M&L for rendering 15 mm thick on concrete/ brick/stone surface wall in cement mortar 1:4 mixed with liquid WPC @ 200 ml/50Kg of cement or as per manufactures's instructions, finished fair and even, for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height complete all as specified & directed. Note:- WPC shall be measured and paid separately as supply only.
M&L for applying two coats of white/colour washing on new plaster surfaces including preparation, for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height complete all as specified & directed.
M&L for plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in coping & similar work for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height complete all as specified & directed.
S & F Welded steel wire fabric n exc 4Kg complete to brick/concrete wk or steel members for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height complete all as specified & directed.
S & F framed work such as grills, gratings and similar work incl welding conforming to Fe.290.Gde-E-165 for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height complete all as specified & directed.
M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multi stranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0 mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/street/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed.
All as per item No 95 here in before but One socket outlet 5/6 Amps on independent bd controlled by one switch complete all as specified & directed.
All as per item No 95 here in before but One socket outlet 5/6 Amps controlled by one switch on same board with other switches complete all as specified & directed.
All as per item No 95 here in before but using 2.5 sqmm PVC FRLS insulated stranded copper cunductor cable and for one socket out let 3/6 pin, 15/16 Amps controlled by one 1 way switch on independent board complete all as specified & directed. NOTE-For item no 1 to 4 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Coloumns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches,sockets,regulators,lamp holders,light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade)
Supply and fix switch piano, flush type, single pole, 5/6 Amps one way, 230 volts complete all as specified and directed.
Supply and fix switch piano, flush type, single pole, 15/16 Amps one way, 230 volts complete all as specified and directed.
Supply and fix socket outlet, 5/6 Amps, flush type, 5 pin 230 volts complete all as specified and directed.
Supply and fix socket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed.
S&F for ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals complete all as specified and directed.
Supply and fix lamp holder insulated body with back plate for batten fitting complete all as specified and directed.
Supply and fixing LED Bulb 15 watt, single phase, 230 Volts AC supply suitable for lamp holder complete all as specified and directed.
Supply & fix surface/wall mounting LED batten 20 watt luminaire having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with mounting accessories complete with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed.
Supply & fix surface mounting type bulkhead 10 watt LED luminaire ENDURA RUGBY NEO IP 65 environmental friendly, altra modern energy saving , decorative oval comprising of high brightness LEDs, connector block etc with internally prewired fixed to wall with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.
Supply and fix in replacement MCB DB sheet metal enclosure factory fabricated double door SPN 4 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doorscomplete all as specified and directed.
Supply and fixing in replacement MCB SPN 240V, 50 Hz, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity 32 Amp rating in the MCB DB complete with connection testing and commissioning complete all as specified & directed.
Supply & fix MCB SP, 6 to 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed.
M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .
Supply & Laying, testing ,cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volt grade, with stranded aluminium conductor of size 10 Sqmm 2 core compele all as specified and as directed.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose/ soil for taking out/laying CI/GI pipe line and getting out soft/loose soil complete all as specified and as directed by Engineer-in-Charge.
Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed by Engineer-in-Charge.
Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed by Engineer-in-Charge.
Supplying and laying un-rainforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable.
M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as directed at site by Engr- in-Charge.
Supply and fixing GI Pipe 25mm Light grade , for cable protection laid in trench under road or path or fixed on pole or wall with clamps with all fittings complete all as specified and as directed.
S&F iron metal body heavy duty exhaust fan 300mm sweep, double ball bearing, copper wound, with louvers, 230 volts, 50 Hz, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm strandard copper conductor 3 core flexible cable cord complete all as specified and directed.
Supply and fix 'Medium Grade' galvanised iron tubes with all fittings such as tees bends elbow etc fixed on walls/ floors of 20 mm bore complete all as directed
Supply and fix gun metal gate valve of size 20 mm bore with iron wheel head screwed both ends for iron pipe and fixed of following sizes complete all as directed
Supply and fix PVC ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 20mm bore complete all as directed
Material and labour for Drilling and tapping cast iron water mains (in position) for branch connections of the internal 20 mm dia complete all as directed.
Supplying, fixing, testing and commission of MS header made out of Heavy duty ERW pipe of size 300 mm dia with end plates of 5 Mtrs length with inlet connection 150 mm dia-02 , and outlet connection 150 mm dia -03 Nos, 200 mm dia- 01 Nos on PCC pillars complete all as specified and directed. Note:- All accessories like all fittings ( standard MS fittings with welded joint shall be used on the pipes) including tees, elbows, d-joint, reducer, union , flanges, rubber gaskets, GI nuts bolts, washer, including supporting/ fixing the pipe on floor/wall/ ceiling with clamps, hangers, angles with clamps, hangers, angles as per specification complete with two or more coats of synthetic enamel paint of approved make/ shade over one coat primer complete.
S&F MS Pipe ERW Steel including specials, nominal 200 mm dia as per IS 3589 (1981) thickness 5.4 mm.
S&F MS Pipe ERW Steel including specials, nominal 150 mm dia as per IS 3589 (1981) thickness 5.4 mm.
S&F 200mm bore Cast Iron sluice valve both ends flanged PN-1.6 with iron wheel (ISI Marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed.
S&F 150 mm bore Cast Iron sluice valve both ends flanged PN-1.6 with iron wheel (ISI Marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed.
S&F 100 mm bore Cast Iron sluice valve both ends flanged PN-1.6 with iron wheel (ISI Marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed.
M/s Kok Singh Sisodia
M/s D AND R CONSTRUCTION AND SUPPIERS
Balaji Associates
RAJESH ENTERPRISES
M/S KAMAKHYA CONTRACTORS
M/s Rahul Kumar Agrawal
N.K. ENTERPRISES
VISHESH BUILDERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .