8591WELCME MAINTENANCE TO MD ACCN AND REPAIR /REPLACEMENT OF JOINERY FLOORING SANITARY FITTINGS INTERNAL WATER SUPPLY PERIODICAL SERVICES CERTAIN MISC WORKS AT POWER HOUSE LINE AND OMQ AREA UNDER GARRISON ENGINEER M AF JALAHALLI

Amount

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Material and labour for 100mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr in Charge.

Material and labour Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth using Extra Cement, complete all as specified and as directed.

Material and labour Cement Concrete 1:3:6 (20mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, including making joints 12mm wide upto total depth of concrete at every 3.00 metre interval and every change of direction, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Material and labour Non-skid Coloured Ceramic joint free Tiles 7 to 8 mm thick ( Ist quality)(Square/rectangular) area of each tile exceedig 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

Ditto All as per item No 06 but vertical surfaces incl 10 mm thick cement plaster in cm 1:4 complete all as specified and as directed.

Material and labour Non-skid Coloured Ceramic joint free Tiles 7 to 8 mm thick ( Ist quality) (Square/rectangular) area of each tile exceedig 0.06 Sqm but not exceeding 0.11 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

Material and labour Non-skid Coloured Ceramic joint free Tiles 7.0 to 8.0mm thick ( Ist quality) in skirting/dado, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

Material and labour Vitirified Ceramic Tiles 9-10mm thick ( Ist quality) (Square/ Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.

Material and labour Vitirified Ceramic Tiles 9-10mm thick ( Ist quality) (Square/ Rectangular) Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.

Material and labour for Cement concrete chequered pre polished any coloured tiles 30cm x 30xm x20mm to25 mm thick, machine pressed; set, jointed and pointed in net coloured pigment in floors,incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes all as specified and as directed.

Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Material and labour Machine cut Cuddapah Stone Slab 20-25mm thick in cooking platform and in similar work, laid over 20mm thick Screed base in Cement Mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab and sides including rubbing and polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

Demolition Cement Concrete (Reinforced) of any description and in any position complete and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Material and labour Reinforced Cement Concrete 1:2:4 (20mm gradded stone aggre-gate) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Item.

Material and labour TMT Bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

Material and labour TMT Bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

Material and labour Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Material and labour Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Stone Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

Material and labour preparing New Plastered Surfaces of Walls by applying a Coat of Wall Care Putty including rubbing down with Sand Paper to obtain a smooth finish surface and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.

Material and labour Rendering (ceiling)5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.

Material and labour preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

Material and labour for 25 mm thk (average thickness) plain cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding cocrete on roof after thoroughly cleaning the roof with water and finishing the surface even and smoth when concrete is green complete all as directed.

Material and labour for water proofing treatment on horisontal and vertical surfaces with applying of oil bound bituminous primer @0.20 Kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not less than 4.00 kg/sqm reinforced with non woven polyester matt weighing not less than 160 gms/sqm including minimum 10 cm side over laps and 15 cm end lap torch sealed and bonded as per detailed procedure on note No 6 of TD drawing No AFB/TD/260/06 sheet No 1/1(R) and applying a coat of blown grade @1.2 kg per sqm hot bitumen 90/15 over and below the membrane finished with solar reflective bituminous aluminium paint/primer @0.1 Kg per sqm all as specified and as directed including Removing complete existing treatment on roof surfaces surfaces by picking , sweeping clean and washig down with water to remove dust, etc.

Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.

Material and labour preparing New Plastered Surfaces of Walls by applying a Coat of Chalk Whiting (as Preparatory Treatment) and applying Two Coats of cement based Paint with approved Tint as per manufacturer's instructions, complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Supply and fixing Factory made Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

Supply and fixing Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain Colour (Ivory Shade) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails of Mild Steel Frame shall be covered with Heat Moulded Wood Grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width Stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood Grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles & Rails with suitable 5.0mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mmx10mm (90°) and jointed together with Solvent Cement and fixing in the Frame at Site, complete all as specified and as directed.

Supply and fixing Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed.

Supply and fixing Stainless Steel Butt Hinge 75mm long (weight not less than 60 Gram) and fixed, complete all as specified and as directed.

Supply and fixing Aluminium Handle 125mm long (weight not less than 90 Gram), Cast type, anodised, complete all as specified and as directed.

Taking down Frame of any description (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed.

Supply and fixing Pressed Steel Frame for door of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.

Supply and fixing Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.

Supply and fixing for 35 mm thick 2nd class HW factory made panelled shutters with panel of 12 mm thick veneered commercial plywood kiln seasoned chemically treated with 15 x 6 mm edging all around the panels.

Material and labour Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beeds supplied and fitted to Chowkat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed.

Material and labour Galvanised steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed

Material and labour Galvanised Steel Wire Cloth 0.56mm nominal dia of Wire and average width of aperture 1.18mm and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and as directed.

Supply and fixing Aluminium Sliding Door Bolts having length of Bolt 300mm, plate type, stove enamelled black, with bright Bolt not less than 12mm dia with and including a minimum of 6 Bolts and Nuts, 4 on Bolt Plate and 2 on Staple Plate and fixed, complete all as specified and as directed.

Supply and fixing Mild Steel Sliding Door Bolts having length of Bolt 300mm, plate type, stove enamelled black, with bright Bolt not less than 12mm dia with and including a minimum of 6 Bolts and Nuts, 4 on Bolt Plate and 2 on Staple Plate and fixed-in-repairs, complete all as specified and as directed.

Supply and fixing mild Steel Butt Hinge 100mm long (weight not less than 80 Gram) and fixed, complete all as specified and as directed.

Supply and fixing Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed.

Supply and fixing Floor Door Stopper 150mm in size, Aluminum alloy Body and Tongue with Hard Drawn Steel Spring (weight not less than 90 Gram), complete all as specified and as directed.

Supply and fixing Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.

Supply and fixing Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed-in-repairs, complete all as specified and as directed.

Material and labour preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.

Taking down Frame (without taking off Shutter from the Frame) n exc 1.5 Sqm including Guard Bars/ Grill, complete all as specified and as directed.

Supply and fixing Steel windows with side hung shutters, projecting type hinges with steel handle, and steel peg stay, complete with glazing and guard bars, dovetailed or welded and all as specified and directed.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing but fixed with 0.56mm nominal dia of wire and average width of aperture 1.18mm , dovetailed or welded and all as specified and directed.

Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frame including punching or drilling out old Glazing Pins/Spring Clips, complete all as specified and as directed.

Supply and fixing Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.

Supply and fixing Sheet Glass 4.0mm thick, Frosted quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 3 mm thick, in squares/rectangle n.exc. 0.50 Sqm in each pane including. Necessary new oil putty or with existing metal beadings complete.

All as per item No.59 here-in-before but glass pane exc. 0.5 sqm in each pane.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and , S/F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane and securing with new oil putty and providing and fixing new metal beadings complete.

Dismantling Structural Steel or Mild Steel Work of any description not otherwise provided for, complete all as specified and as directed.

Material and labour Mild Steel Framed Works such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework of Water Tanks and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.

Material and labour Running Welding Work exc. 2.5 Cm but not exc. 5.0 Cm (thickness of Metal to be welded exc. 6.0mm but not exc. 9.0mm) to Members of existing Door/Window/Ventilator/Guard Bars/ Gate/ Grills etc. Guard Bars in repairs, providing new Hinges to make the Steel Members Functional (as required) including painting the Steel Member to match the existing, complete all as specified and as directed.

Material and labour preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Supply and fixing in repairs Stainless Steel Curtain Rod 20mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.

Refixing old Steel Tubing 15mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 18 here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of new GI Connections (as required/ordered at Sites), complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.

Refixing old Steel Tubing 20mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 19 here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of new GI Connections (as required/ordered at Sites), complete all as specified and as directed.

Preparation of plastered old decorated surfaces of walls including cleaning by brooming down scrapping down smoke & moulds efflorescent salts,cleaning the drops in the floor/shutters after treatment and applying one coat of white wash on wall surfaces all as specified

Material and labour preparing Old Decorated/Treated Surfaces of Ceiling of any description and applying One Coat of White Wash, complete all as specified and as directed.

Material and labour Complete Removal of existing Surface Treatment from Walls, applying a Coat of Wall Care Putty 1.5 minimum thick including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.

Material and labour complete removal of old decorated wall surfaces of any description ,cleaning the drops in the floor/shutters after treatment and applying two coat oil bound distemper over one coat interior primer and all as specfied and directed by Engg-in- Charge.

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence salts, treading oil, greasy spots,cleaning the drops in the floor/shutters after treatment etc and applying one coat of oil emulsion distemper and all as specified and directed.

Material and labour preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of Weather Coat Exterior Paint with approved Tint as per manufacturer's instructions, complete all as specified and as directed.

Material and labour preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

Material and labour preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

Supply and fixing Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Short Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing in repairs Bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms)

Supply and fixing in repairs Bib taps short/long body cast copper alloy chromium plated with fancy type handle screwed down screwed for iron pipe or for brass ferrule and fixed complete for 15 mm bore all as specified make.

Supply and fixing Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing in repair 15 mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms))

Supply and fixing Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing in repairs 15 mm dia stop valves cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe .

Supply and fixing 15mm bore Brass CP angular stop cock with crutch or butterfly handle complete as fixed in repair.

Supply and fixing Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing Water Storage Lead (cover) suitable for water tanks of capacity 500 Litre or 1000 Litre capacity, including suitable hinging device complete all as specified and as directed.

Supply and fixing Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts and Making Good to Floor/ distrubed surfaces, including jet connections and white seat cover ISI marked with hinging devices etc, and fixed-in-repairs, complete all as specified and as directed.

Supply and fixing in repairs viterous china wash down water closet (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim all as specified .

Supply and fixing Plastic Seat Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed-in-repairs, complete all as specified and as directed.

Material and labour PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back type) with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed.

Supply and fixing PVC Waste Pipe 32mm dia (bore) having 600mm long and fixed complete to Walls, Ceilings or in Floors, etc.and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing in repairs PVC waste pipe 32/40mm bore for WHB & Sink complete.

Supply and fixing in repair waste coupling 32 mm dia of PTMT (half or full threaded) minium weight 45 gram complete.

Supply and fixing PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing Bath Wall Mixer with 15mm bore (dia) Spout, Chromium Plated with long Bend Pipe for Over Head Shower including Flanges and fixing-in-repairs, complete all as specified and as directed.

Supply and fixing Chromium Plated Shower Rose with Shower Arm 100mm, Swival Joint including fixing to Steel Pipe and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing in repairs corner Glass Shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket for holding/hinging complete.

Supply and fixing CP Grating Round 100mm dia jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.

Supply and fixing Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete.

Supply and fixing in repairs for CP brass health faucet alongwith flexible pipe and stay complete all as specified and directed. Make: Cera/Jaquar

Supply and fixing PVC (SWR) Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate) and fixed-in-repairs, complete all as specified and as directed.

Supply and fixing PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors/walls incl clamps and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors/walls incl clamps and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing PVC (SWR) Bend 110mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

Resecuring or easing and adjusting wooden shutters of any description each without taking down

Supply and fixing in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed.

Supply and fixing PVC (SWR) 75mm bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with Access Door, etc., jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing PVC (SWR) 110mm bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with Access Door, etc., jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

Supply and fixing Mortice Lock Vertical type, size 100mm, Mild Steel, 4-Lever and Fixed-in-repairs, complete all as specified and as directed.

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of cement based paint of approved make and all as specified and directed.

Material and labour for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc.

Material and labour for ceramic coloured tiles of size 300x200mmx7mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded and pointed in any mortar and all as specified and directed.

Material and labour for pre- polished granite slab machine cut 18 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing (Granite finish) with suitable grinding stones complete all as 'specified and as directed.

Dismantling boarding, any description, fixed in any position with nails

Material and labour fo for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work and all as specified and directed.

Supply and fixing 18/19 mm thick Block boards, grade 2 quality Blockgrade commercial type, fixed withscrews to timber frame work and all as specified and directed.

M & L for 2nd class hardwood bull-nosed, splayed, champhered or rounded on one egde or face fixed with nails complete all as specified and directed.

Supply and fixing 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised.

Supply and fixing in repairs 40mm dia, brass cupboard knobs fixed with nut, screw and washer

Supply and fixing in repairs aluminium anodised hasp and staple , 125mm safety type hinge pin including bolt type.

Supply and fixing in repairs Al body (Die Cast ) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and all as directed.

Supply and fixing in repairs 140 mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed

Supply and fixing in repairs MS peg stay 300 mm long enameled black for steel windows with hindged joints etc

Material and labour fo for servicing /easing steel windows shutters of size not exceeding 2 Sqm each including cleaning scrapping hacking oiling replacing welding broken hinges making good disturbed portion painting all as specified as directed by Engr-in –charge

Supply and fixing in repairs coloured PVC toilet cabinet of size 355x455x90mm with looking mirror in replacement of existing looking mirror/woodencabninet and repairing the disturbed surfaces to match with existing.

Supply and fixing in repairs Stainless steel Plate rack 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete

Resecuring or easing and adjusting wooden shutters of any description area n.exc. 1 Sqm each without taking down

Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each without taking down

Supply and fixing in repairs wall mixture incl three joints to steel pipes of 15 mm bore and plugging & screwing to walls and making good the disturbed surfaces of walls to match with existing surfaces all as directed Make: Jaquar

Supply and fixing in repair 16 inches stainless steel shower shelves heavy duty embedded in the wall complete all as specified.

Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking out old steel sink and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed.

Supply and fixing in repairs PVC flexible pipe (Connecter) 15 mm dia, 600 mm long with check nut and bolt with washer all as specified.

Supply and fixing of in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Material and labour for grinding and polishing of terrazzo floor with machine including wax polishing all as specified and directed by EIC.

All as per item No.146 above but in skirting/dado (grinding/ polishing by hand)

Dismantling of existing Old U/s water tank and removing, (Capacity 250 Ltr and n. exc. 500 Ltr) complete all as specified

Dismantling of existing Old U/s water tank and removing, (Capacity 500 Ltr and n. exc. 1000 Ltr) complete all as specified

Supply and fixing rotational moulded polythene water storage tank, cylindrical vertaical with closed top, hoisted and fixed in position, 1000 Ltr capacity complete all as specified and directed

Supply and fixing rotational moulded polythene water storage tank, cylindrical vertaical with closed top, hoisted and fixed in position, 500 Ltr capacity complete all as specified and directed

manoj builders and consultants

M/S SRI BALAJI ENTERPRISES

M B Patel and Sons

SHIRDE ENTERPRISES

shashi shekar construction

ANAND REFRIGERATION

manoj trading agencies